• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.79-82
• /
• 2004

Propellant feeding system is the system to satisfy propellant feeding requirements(mass flow rate, pressure, temperature) at engine inlet of launch vehicle. Propellant feeding test facility is being constructed for the development scheme of pressurization system, processing in tank, propellant piping system, and flow control system that are main technologies in order to develope propellant feeding system. This paper introduces the propellant feeding test facility being constructed in KARI.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.196-200
• /
• 2005

A theoretical model for the calculation of chemical equilibrium composition of propellant combustion product is briefly presented for the performance analysis of monopropellant hydrazine rocket engine. Analysis result is compared to that of test and evaluation of 1-lbf class thruster and is scrutinized primarily from the view point of ammonia dissociation fraction. Chemical equilibrium composition and average molecular weight is additionally depicted according to the variation of propellant inlet pressures and the varying nozzle area ratio. The theoretical analysis is tried as a way of derivation of design parameters for mid- and large-thrust class of monopropellant rocket engines.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.61-65
• /
• 2010

To research and develop a liquid rocket engine injector, it needs empirical studies about the hydrodynamic and spray characteristics such as pressure drop, mixing and atomization. In this study, the design and implementation of lab-scale cold-flow/hot fire test stand which can supply cryogenic propellant and be controlled by time-critical LabVIEW cyclogram logic has been done. In order to visualize the spray of a liquid-centered swirl coaxial injector in cryogenic condition, LN2-GN2 cold-flow test has been done, and combustor assembly and thrust bed for LOX-$GCH_4$ hot-fire test have been fabricated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.203-207
• /
• 2005

An experimental study was carried out to investigate the effect of film cooling in the thrust chamber of liquid rocket using LOx and Kerosene as propellant. The heat fluxes were obtained from the measured wall temperature to the axial direction of thrust chamber for different type of coolant, the various O/F ratio, mass flow rate and the location of the film cooling injector. A thin wall combustion chamber and nozzle were used to obtain the heat flux.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.54-60
• /
• 2010

액체로켓엔진 시스템의 시동 및 정지 또는 추력 제어와 같은 천이 작동시 동특성을 예측하기 위한 선행 연구로서 추진제 공급 시스템의 구성품에 대한 동특성 모델링을 수행하였다. 연료 공급계통과 산화제 공급 계통의 구성품들은 재생냉각채널을 제외하고 같은 것으로 가정하였다. 동특성 모델링의 대상 구성품은 펌프, 관로, 오리피스, 제어 벨브, 재생냉각채널, 인젝터 등이며 실제 엔진 시스템의 축소모형에 대한 수력시험을 통해 각 구성품의 동특성 모델링을 검증하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.67-74
• /
• 2019

In this paper, mathematical models of a simulation code are presented. The simulation code was developed for the startup analysis of an open cycle liquid rocket engine (LRE). Most of the components comprising an LRE, including the priming process in the propellant feeding line, were considered. A startup simulation of a 75-tonf LRE, which was used for the KSLV-II test launch vehicle (TLV), was performed. The simulation results showed good agreement with the engine acceptance test results, thus proving the validity of the startup simulation code.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.80-81
• /
• 2002

비행체의 액체 저장탱크에서의 슬로싱 현상은 비행체의 조정 안정성 상실은 물론 구조적인 파손이 발생하여 인명 및 재정 손실이 초래 될 수 있다. 또한 최근 대형 선박에서의 액체 저장탱크에서도 슬로싱 문제는 주요한 관심사로 되어 있다. 선진기술국에서는 이러한 슬로싱 문제를 해결하기 위해 많은 관심을 쏟아 왔으나 국내에서는 체계적인 연구가 미흡한 실정이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.11-11
• /
• 1998

최적의 액체 램제트 연소기 설계를 위하여 흡입공기와 분무, 혼합 그리고 이에 따른 연소의 일련의 과정이 일어나는 램제트 연소기의 유동해석을 2차원 및 3차원으로 수행하였다. 격자구성은 연소기에 공기를 공급하고 연료를 분무하는 공기 유입관 영역과 연소실 및 노즐 영역, 그리고 출구 대기 영역으로 나누어 독자적으로 격자를 생성시켰다. 연소실 내의 유동 특성에 있어서 2차원과 3차원의 유동해석 결과는 선회영역 유동특성이 크게 차이가 남을 알 수 있었다. 따라서 실제 액체 램제트 연소기의 설계를 위해서는 3차원 유동해석과 실험이 반드시 필요하다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.898-903
• /
• 2011

Units assembled in the liquid-propellant propulsion system of launch vehicles should guarantee their on- and off-design performances under the various environments as well as at the various operation modes for the launch preparation and flight of launch vehicles. Units of liquid-propellant propulsion system can be installed in launch vehicle to insert satellite(s) into target orbit(s) only under the condition that all units must pass a series of tests to confirm whether those units perform normally as designed under the environment, which may be occurred in such stages of all development and operations as development, qualification, acceptance, assembly, pre-launch preparation, launch, and flight, and whether those units have been developed according to design requirements. Requirements for such tests have been already prepared in the advanced countries in launch vehicle systems based on experiences for decades. In Korea, where is now pursuing the development of KSLV-II, the research and development of launch vehicles using liquid-propellant propulsion system have been undergone during over 10 years. Hence test requirements for the development of units consisting of liquid-propellant propulsion system should be defined and Koreanized according to the domestic environment and circumstances and based on the experiences accumulated. In this paper requirements for the tests of units in liquid-propellant propulsion system, which can be feasible domestically, have been reviewed and defined.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.139-143
• /
• 2005

Combustion Test Facility for Liquid Rocket Engine using kerosene and liquid oxygen has been developed for the purpose of cooling and performance study. Test engine of thrust 0.5 KN(design thrust) is tested to confirm the normal operation. Therefore, water-cooled firing tests using kerosene engine with injectors of fuel-centered coaxial type are conducted. With the viewpoint of characteristic velocity, and specific impulse at sea level, and chamber pressure on OF mixture ratio are analyzed.