• 한국동굴학회:학술대회논문집
• /
• 한국동굴학회 1994년도 동굴의 개발과 보전 세미나
• /
• pp.87-88
• /
• 1994

1. 석회암의 성인 (1) 암석의 풍화로 암석 중의 탄산수소칼슘이 되어 녹아 나온다. (2) 탄산수소칼슘은 액체로만 존재하며 이는 물에 섞여 호수나 바다로 유입된다. (3) 탄산수소칼슘이 수온 변화로 이산화탄소를 잃어 버리면 탄산칼슘(방해석이나 아라고나이트-석회암)의 결정으로 정출 퇴적되어 석회암층을 만든다. 수중 식물이 탄산수소칼슘을 흡수하여 석회질인 껍데기(조개류, 유공충 등), 뼈(산호 및 기타 동물)를 만든다.(중략)

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.641-649
• /
• 2023

This study analyzes the cool-down process of liquid hydrogen storage tanks, which have advantages in terms of large-capacity transfer, storage, and utilization as hydrogen demand increases. A hydrogen liquefaction plant is selected for analysis and an efficient tank cooling method is sought by comparing the time required for the cool-down process with the gas consumption in connection with the gassing-up process required for the operation of the liquid hydrogen storage tank. The results of this study can be referred to in the operation process after the initial start-up and maintenance of the hydrogen liquefaction plant.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.302-310
• /
• 2013

As an initial step to develop a liquid hydrogen pump of piston type operated under cryogenic and high pressure, leakage and piston head shape for the piston pump were discussed with temperature and pressure. As the results, the leakage depended on correlation among density, viscosity, clearance area by the low temperature. In order to reduce the leakage, it was found that the air-tightness can be improved by minimizing contact surface between piston and cylinder, and also increasing pressure in-cylinder can reduce piston clearance. Among the proposed piston shapes, D type piston shape had the most air-tightness. D type piston had smaller contact surface than other piston shape and easier expansion of cup shape by pressure. The leakage of D type piston shape was found about 7%, compared with A type piston shape. But it was required that analyze about vapor lock by friction and wear resistance.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.347-355
• /
• 2021

This paper is a study on the thermal design of printed circuit heat exchanger (PCHE) to supply cryogenic high pressure liquid hydrogen stored from hydrogen liquefaction process by using computational fluid dynamics (CFD). This PCHE should be thermally designed to raise the temperature of cryogenic liquid hydrogen to a desired temperature and also to be anti-icing to avoid any local freezing in hot channel. This research presents the effect of inlet velocity and inlet temperature of hydrogen, and the effect of flow configurations of co/counter-flow on thermal design of PCHE heat exchanger based on various CFD simulation analysis.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.541-549
• /
• 2022

This study investigates anti-icing design by conjugate heat transfer analysis in lab-scale printed circuit heat exchanger (PCHE) for supply of cryogenic high pressure liquid hydrogen. The conjugate heat transfer analysis by using computational dynamics (CFD) provided various temperature distributions at important locations in PCHE heat exchanger and predicted the possibility of freezing in hot channel. And, the effect of inlet temperature of glycol water was analyzed in order to resolve the freezing problem in PCHE.

• 전기기술인
• /
• 제246권2호
• /
• pp.30-33
• /
• 2003

증발성 액체소화제 할로겐화 탄화수소는 기화되기 쉬운 액체 또는 기체이고 억제작용, 희석효과, 기화열에 의한 냉각 등 3가지의 작용을 한다. 액상인 것은 목재화재에도 다소 쓰이고 있지만 가연성약제의 소화에 쓰일 뿐만 아니라 전기의 불량도체이므로 전기화재에 대한 적응성이 있다.

• 한국가스학회지
• /
• 제15권3호
• /
• pp.1-5
• /
• 2011

수소액화 공정은 수소 예냉 에너지, 액화에너지 그리고 Ortho/Para 변환열 제거 등 다량의 에너지가 요구되어 진다. 본 논문은 기존의 수소액화 공정에 LNG냉열을 이용하여 에너지절약 효과를 얻고자 기본설계 및 열해석을 수행하였다. 액화 소요에너지에 LNG냉열을 적용하면 수소액화공정의 에너지절약효과와 함께, LNG기지의 해수에 버려지는 LNG냉열을 회수, 이용하는 일석이조의 에너지절약기술이 된다. 열해석에 의한 설계를 수행한 결과 현재의 액체질소 예냉식 수소액화 플랜트의 소요에너지에 비하여 LNG냉열을 이용할 경우 소요동력량은 75%가 절감되었다. 이는 예냉을 액체질소 대신에 냉열을 사용하기 때문이다. 또한 LNG냉열량은 수소액화량 1T/D기준할 때 15T/D 유량이 요구되었다.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.119-127
• /
• 2019

Reliable $H_2$ supply is necessary for entering a $H_2$ society. Among the various $H_2$ storage and transportation methods, liquid organic $H_2$ carrier (LOHC) is in the spotlight because of a lot of advantages compared to conventional one such as compressed $H_2$ and liquefied $H_2$. Therefore, we performed preliminary economic analysis of $H_2$ supply cost using LOHC for a $H_2$ production capacity of $300Nm^3\;h^{-1}$ employing itemized cost estimation and sensitivity analysis to evaluate economic viability of this technology in Korea.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.650-656
• /
• 2023

In order to efficiently control boil-off rate of a liquefied hydrogen tank, the important thing is to maintain an appropriate vacuum level. however, compared to small and medium-sized storage tank, it is very difficult to create and maintain vacuum in large-capacity storage tanks. In this study, we aim to determine the target level of future large-capacity storage tank technology development and secure basic data on performance test methods by analyzing the corelation between evaporation gas and thermal conductivity of liquefied hydrogen storage tanks.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.1-1
• /
• 1999

2유체 동축인젝터(coaxial twin fluid injector)는 액체산소와 액체수소를 추진제로 사용하는 SSME(Space Shuttle Main Engine)이나 유럽의 Arian 5 Vulcain 엔진과 같은 저온추진제 엔진에 널리 사용되고 있다. 추진제를 미립화 시키는 장치로서 사용하는 다른 여러 형태의 인젝터에 비교할 때 저속의 액체산화제 주위에 고속의 가스연료가 분사됨으로서 발생되는 전단력에 의해 추진제가 미립화되는 특징을 가지며, 이러한 메카니즘은 매우 복잡하여 아직까지 정확히 규명되지 못하고 있는 실정이다.