• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.350-353
• /
• 2000

Thermotropic liquid crystalline polymer(LCP) has been used for the alignment of ferroelectric liquid crystal (FLC) molecules and the surface morphology of the resulting polymeric thin film has been observed by atomic forced microscope. The uniform alignment of FLC molecules on the surface of thermotropic LCP thin film was obtained even though microgroove structures were not formed. The contrast ratio of sample cell was about 23:1 including two polarizers and a good memory capability due to the bistability of FLC was obtained. After AC field stabilization at 20V, the typical stripe-shaped patterns appeared.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.37-43
• /
• 2002

There have been numerous experimental studies for heat transfer measurement technique. This study investigates optical methods for measuring local heat transfer coefficient using thermochromic liquid crystal. Transient and steady methods have been utilized to measure local heat transfer coefficient on a cylinder with a cross flow. The steady method is based on the heat-coating technique and two transient methods adopt by-pass technique and insertion technique, respectively. Both techniques of transient method employ heating technique in which the flow is heated by using the electric heater and cooling technique which cools the preheated cylinder. Experimental results indicate that each methods have nearly similar results. Detailed discussions have been made for its own advantages and disadvantages.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.22-28
• /
• 1995

Since the discovery of liquid crystallinity by Reinitzer [1] in 1988 as he studied the melting behavior of cholesteryl benzoate, anisotropic structural ordering in fluid phases has been of considerable interest to chemists, physicists and other scientists. Polymers which exhibit liquid crystallinity either in solution (lyotropic) or in the neat state upon heating (thermotropic) have both theoretical and practical importance [2]. Du Pont's Kevlar, a high modulus polyamide fiber spun from a lyotropic solution, is a prime example of such an application.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.21-21
• /
• 1993

고분자 막을 이용한 기체 분리 기술은 에너지 소비의 절감과 높은 분리 효율성 등으로 인해 (1) 수소 회수 및 $H_2/O_2$의 비율저종 (2) $CH_4/CO_2$ 분리 (3) $O_2/N_2$ 분리등에 이용되고 있다. 이러한 분리막의 투과도와 선택투과도를 모두 높이기 위한 연구가 활발히 진행되고 있는데, 그 연구방향은 (1) 새로운 고분자의 합성 및 고분자의 개질 (2) 복합재료의 개발 (3)액정 (4)촉진수송법 등으로 나눠질 수 있다. 이 중 촉진수송(Facilitated Transport)이란 특정한 기체와 가역적 친화력 또는 흡착력을 갖는 운반체(Carrier)를 액체나 고체막에 분산시켜 원하는 특정 기체만을 선택적으로 수송하는 것을 말한다.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.174-179
• /
• 2015

Alignments of photo-reactive mesogen were induced using bare glass substrates without a polymer alignment layer. It was found by using polarized FTIR spectroscopy, polarized microscopy, and birefringence measurement experiments that the reactive mesogen could be aligned along the rubbing direction although the glass substrate without an alignment layer was used. The induction mechanism of the rubbed bare glass is ascribed to that polymers from rubbing clothes are coated on the glass substrate along the rubbing direction and lead the alignment of liquid crystals through intermolecular interactions.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.308-313
• /
• 2005

The effects of molecular environments on photoisomerization of an azobenzene group were investigated using In-situ UV/Vis spectroscopy and optical anisotropy measurement technique. The reversible and repeatable photoisomeritation reactions of azobenzene were observed by irradiating the film containing 4-hydroxyazobenzene and by measuring absorption intensities of the characteristic bands of trans and cis isomers simultaneously. When the self-assembled monolayer with azobenzene groups was used as an alignment layer for a liquid crystal cell, the homeotropic alignment was induced due to their compact packing structures of azobenfene groups along the vertical direction of the substrate. By irradiating UV light on this cell, the trans-azobenzene groups change to cis-isomers through the photoisonlerieation and then resulting in the planar alignment of liquid crystal molecules.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.679-684
• /
• 2017

Hydrated liquid crystalline vesicles incorporating a edge activator, which confers flexibility to the vesicle membranes, were prepared and niacinamide was encapsulated in them. The formation of liquid crystalline phases and their thermal phase transitions were investigated by polarized optical microscopy and differential scanning calorimetry (DSC), respectively. Droplet sizes of the vesicles were reduced to several tens of nanometers by incorporating edge activators, such as sodium deoxycholate, lysolecithin, or polysorbate 80. The amount of niacinamide permeated into a pig skin increased greatly using the hydrated liquid crystalline vesicles compared to the case where niacinamide was applied in an aqueous solution state. The vesicles incorporating 10% sodium deoxycholate increased the amount of niacinamide permeated nearly four times. These results suggest that edge activators are effective in improving the skin permeability of vesicles.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.64-68
• /
• 2021

We demonstrate an effect of annealing temperature on imprinting process of BiLaO thin film for liquid crystal alignment. BiLaO prepared sol-gel process was deposited by spin coating on a glass substrate, and then transferred to a pre-fabricated aligned pattern which is fabricated on a silicon wafer by laser interference lithography. Thin film was annealed at different temperature of 100, 150, 200, and 250 ℃. From the polarized optical microscopy analysis, the liquid crystal orientation was not uniform at the annealing temperature of 200 ℃ or lower and the uniform liquid crystal alignment characteristics were confirmed at the annealing temperature of 250 ℃. From atomic force microscopy, the pattern was not transferred at a temperature of 200 ℃ or lower. In contrast, the pattern was transferred at 250 ℃. Anisotropy of the thin film was obtained by the alignment pattern transferred at a temperature of 250 ℃, and the liquid crystal molecules could be evenly oriented on the thin film. Therefore, it was confirmed that the liquid crystal alignment process by the imprinting process of the BiLaO oxide film was affected by the annealing temperature.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.291-298
• /
• 2020

ZITO/Ag/ZITO multilayer transparent electrodes at room temperature on glass substrates were prepared using RF/DC magnetron sputtering. Transparent conductive films with a sheet resistance of 9.4 Ω/㎡ and a transmittance of 83.2% at 550 nm were obtained for the multilayer structure comprising ZITO/Ag/ZITO (100/8/42 nm). The sheet resistance and transmittance of ZITO/Ag/ZITO multilayer films meant that they would be highly applicable for use in polymer-dispersed liquid crystal (PDLC)-based smart windows due to the ability to effectively block infrared rays (heat rays) and thereby act as an energy-saving smart glass. Effects of the thickness of the PDLC layer and the intensity of ultraviolet light (UV) on electro-optical properties, photopolymerization kinetics, and morphologies of difunctional urethane acrylate-based PDLC systems were investigated using new transparent conducting electrodes. A PDLC cell photo-cured using UV at an intensity of 2.0 mW/c㎡ with a 15 ㎛-thick PDLC layer showed outstanding off-state opacity, good on-state transmittance, and favorable driving voltage. Also, the PDLC-based smart window optimized in this study formed liquid crystal droplets with a favorable microstructure, having an average size range of 2~5 ㎛ for scattering light efficiently, which could contribute to its superior final performance.

• Polymer Science and Technology
• /
• v.7 no.6
• /
• pp.738-749
• /
• 1996