• 제목/요약/키워드: 액적 퍼짐

검색결과 23건 처리시간 0.018초

고온으로 가열된 고체 표면과 충돌하는 타원형 액적의 퍼짐 거동 (Spreading Dynamics of an Ellipsoidal Drop Impacting on a Heated Substrate)

  • 윤성찬
    • 대한기계학회논문집B
    • /
    • 제41권3호
    • /
    • pp.205-209
    • /
    • 2017
  • 고온으로 가열된 고체 표면 위를 타원형 액적이 충돌할 때, 구형 액적 충돌 거동과 다른 비축대칭적인 퍼짐 거동이 발생하여 반동 높이 조절이 가능하다고 보고되었다. 본 연구에서는 타원형 액적 종횡비가 퍼짐 거동에 미치는 영향을 조사하였다. 충돌 거동은 동기화된 두 대의 고속카메라를 이용하여 두 측면에서 관찰하였고, 액적의 장축과 단축에서의 액적 퍼짐 너비를 각각 조사함으로써 퍼짐 특성을 분석하였다. 실험 결과에서 종횡비가 클수록, 액적 단축의 최대 퍼짐 너비는 증가하는 데 반해, 액적 장축의 것은 큰 변화가 없는 것으로 나타나는 데, 이는 수축 과정에서 액적 정렬을 촉진하고 반동 억제에 중요한 역할을 한다. 본 연구에서는 추가적으로 액적 종횡비와 충돌 속도가 동시에 큰 영역에서 발생하는 반동 거동과 액적 분열 현상에 대하여 고찰하였다.

수정된 CIP방법을 이용한 벽면 충돌 후 액적의 퍼짐 현상에 대한 수치해석 연구 (Numerical Study on Droplet Spread Motion after impingement on the wall using improved CIP method)

  • 손소연;고권현;이성혁;유홍선
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.109-114
    • /
    • 2010
  • Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

  • PDF

완전 비습윤 고체 표면 위 타원형 액적의 충돌 및 퍼짐 거동에 대한 수치적 연구 (NUMERICAL ANALYSIS OF THE IMPACTING AND SPREADING DYNAMICS OF THE ELLIPSOIDAL DROP ON THE PERFECT NON-WETTING SOLID SURFACE)

  • 윤성찬
    • 한국전산유체공학회지
    • /
    • 제21권4호
    • /
    • pp.90-95
    • /
    • 2016
  • Leidenfrost drops with ellipsoidal shaping can control the bouncing height by adjusting the aspect ratio(AR) of the shape at the moment of impact. In this work, we focus on the effect of the AR and the impact Weber number(We) on the non-axisymmetrical spreading dynamics of the drop, which plays an important role in the control of bouncing. To understand the impact dynamics, the numerical simulation is conducted for the ellipsoidal drop impact upon the perfect non-wetting solid surface by using volume of fluid method, which shows the characteristics of the spreading behavior in each principal axis. As the AR increases, the drop has a high degree of the alignment into one principal axis, which leads to the consequent suppression of bouncing height with shape oscillation. As the We increases, the maximum spreading diameters in the principal axes both increase whereas the contact time on the solid surface rarely depends on the impact velocity at the same AR. The comprehensive understanding of the ellipsoidal drop impact upon non-wetting surface will provide the way to control of drop deposition in applications, such as surface cleaning and spray cooling.

다양한 조건하에서 모세관력 불균형에 의해 구동되는 수평 표면 위의 액적 거동 (Behavior of Liquid Droplet Driven by Capillarity Force Imbalance on Horizontal Surface Under Various Conditions)

  • 명현국;권영후
    • 대한기계학회논문집B
    • /
    • 제39권4호
    • /
    • pp.359-370
    • /
    • 2015
  • 본 연구는 다양한 조건하에서 모세관력 불균형에 의해 구동되는 수평 표면 위의 액적 거동을 수치해석적으로 연구한 것이다. 액적 거동은 자체개발 코드(PowerCFD)를 사용하여 수치해석하였다. 수치해석에 사용된 코드는 보존적인 압력기반 유한체적방법에 기초한 비정렬 셀 중심 방법 및 VOF 방법에 체적포착법인 CICSAM을 채용하고 있다. 상세한 액적 거동이 다양한 초기 액적형상, 접촉각 및 표면장력(또는 Bond 수)의 조건하에서 얻어졌다. 또한 액적 이송 메커니즘이 액적 형상에 대한 수치해석 결과로부터 검토되었다.

유화액적 연료의 점화와 미소폭발의 특성 (Characteristics of ignition and micro-explosion for droplets of water-in-fuel emulsion)

  • 정인철;이경환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권1호
    • /
    • pp.1-8
    • /
    • 2013
  • 데칸에 물을 혼합하여 일정한 크기와 간격으로 액적을 형성하여 물과의 혼합비율, 분위기 온도, 액적의 크기와 간격 등이 유화액적의 점화와 미소폭발의 특성에 어떠한 영향을 주는가를 고온의 연소실에서 특성을 비교하였다. 점화가 시작하는 온도는 물의 비율이 낮을수록, 액적 크기가 클수록 낮아진다. 물의 혼합비율에 따른 수명시간은 단일 액적에서는 미소폭발의 영향으로 수명시간이 현저하게 짧아지나, 액적크기가 크고 분위기온도가 높을수록 미소폭발의 발생빈도는 자주 나타나게 된다. 퍼짐시간은 물의 혼합비율이 적을수록 더 빨라지고 서스펜더의 수가 많을수록 더 짧아짐을 알 수 있다.

방사광 X-선 영상법을 활용한 마이크로/나노 구조 표면에서의 액체 퍼짐 가시화 연구 (A Visualization Study of Liquid Spreading on Micro/nano Textured Surfaces with Synchrotron X-ray Imaging)

  • 곽호재;유동인;도승우;박현선;김무환
    • 대한기계학회논문집B
    • /
    • 제41권8호
    • /
    • pp.531-536
    • /
    • 2017
  • 최근들어 고체 표면의 젖음성을 향상시키기 위해 표면에 나노/마이크로 기술을 적용하는 연구가 진행되고 있다. 이러한 연구를 통하여 나노 구조가 표면 젖음성을 향상 시킬 수 있고, 액체 퍼짐은 실 모세관(Capillary wicking)에 의해 형성된다는 것을 확인하였다. 그러나 대부분의 연구는 나노 구조의 작은 스케일때문에 분석하는데 어려움이 있어서 퍼짐현상을 정성적으로 분석하고 있다. 본 연구에서는 마이크로/나노/마이크로-나노 구조를 갖는 실리콘 표면에서의 액적 계면 거동을 정량적으로 분석하였으며, 계면의 거동은 방사광 X선 영상법으로 직접 측면가시화를 진행하였다. 그 결과 모든 구조 표면에서 퍼짐 현상이 발생하였고, 액체 계면의 거동이 서로 다르게 나타났다. 마이크로구조의 경우 일정한 액막 두께를 유지하며 퍼졌고, 나노구조는 완만한 경사를 갖는 것으로 나타났다. 마이크로-나노 구조의 경우 두 가지가 결합된 형태의 퍼짐현상을 보였다. 또한 액체의 퍼짐은 마이크로-나노 구조에서 가장 증진됨을 확인하였다.

수정된 CIP방법을 이용한 벽면 충돌 후 액적의 퍼짐 현상에 대한 수치해석 연구 (NUMERICAL STUDY ON DROPLET SPREAD MOTION AFTER IMPINGEMENT ON THE WALL USING IMPROVED CIP METHOD)

  • 손소연;고권현;이성혁;유홍선
    • 한국전산유체공학회지
    • /
    • 제15권4호
    • /
    • pp.25-31
    • /
    • 2010
  • Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP method. The result using improved CIP method shows the better result of the experiments, comparison with result of original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

기울어진 미세 텍스쳐 표면에 충돌하는 단일 액적의 퍼짐 특성 (Spreading Characteristics of a Liquid Droplet Impacting Upon the Inclined Micro-textured Surfaces)

  • 신동환;문주현;이성혁
    • 한국분무공학회지
    • /
    • 제16권2호
    • /
    • pp.104-109
    • /
    • 2011
  • The present study investigated experimentally the spreading characteristics of a single liquid impinging on the inclined micro-textured aluminum (Al 6061) surfaces manufactured by using a micro computerized numerical control (${\mu}$-CNC) milling machine. The textured surfaces were composed of patterned micro-holes (diameter of $125\;{\mu}m$ and depth of $125\;{\mu}m$). In our experiment, the de-ionized (DI) water droplet of $4.3\;{\mu}l$ was impinged normally on the non-textured and textured surfaces at two different Weber numbers, and the droplet impinged on the inclined surfaces with different angles. A high speed camera was used to capture sequential digital images for measurement of the maximum spreading distance. It was found that for the textured surface, the measured apparent equilibrium contact angle (ECA) increased up to $105.8^{\circ}$, higher than the measured ECA of $87.6^{\circ}$ for the non-textured (bare) surface. In addition, it is conjectured that the spreading distance decreased because of a liquid penetration during droplet spreading through the holes, the increase in hydrophobicity, and viscous dissipation during impact process.

소수성 텍스쳐 표면에 충돌한 단일 액적의 퍼짐 및 고착 특성 (Spreading and Deposition Characteristics of a Water Droplet Impacting on Hydrophobic Textured Surfaces)

  • 이재봉;문주현;이성혁
    • 한국분무공학회지
    • /
    • 제17권1호
    • /
    • pp.14-19
    • /
    • 2012
  • The present study conducts experimental investigation on spreading and deposition characteristics of a $4.3{\mu}l$ de-ionized (DI) water droplet impacting upon aluminum (Al 6061) flat and textured surfaces. The micro-textured surface consisted the micro-hole arrays (hole diameter: $125{\mu}m$, hole depth: $125{\mu}m$) fabricated by the conventional micro-computer numerical control (${\mu}$-CNC) milling machine process. We examined the surface effect of texture area fraction ${\varphi}_s$ ranging from 0 to 0.57 and impact velocity of droplet ranging from 0.40 m/s to 1.45 m/s on spreading and deposition characteristics from captured images. We used a high-speed camera to capture sequential images for investigate spreading characteristics and the image sensor to capture image of final equilibrium deposition droplet for analyze spreading diameter and contact angle. We found that the deposition droplet on textured surfaces have different wetting states. When the impact velocity is low, the non-wetting state partially exists, whereas over 0.64 m/s of impact velocity, totally wetting state is more prominent due to the increase kinetic energy of impinging droplet.