• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.81-86
• /
• 2004

Between rolling airframe missile and swirling propulsion jet passing through convergent-divergent nozzle of the rocket motor, occur exchanges of angular momentum which result in the increase of roll speed of the missile. This phenomena in called jet roll damping. In the study jet roll damping was formulated from conservation equation of angular momentum. And the maximum value of the jet roll damping of KPSAM was estimated with assumed swirl velocity distribution at nozzle exit and compared with result of computation of axisymmetric compressible turbulent nozzle flow.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.181-186
• /
• 2007

Compressible flow characteristics in a butterfly valve is studied experimentally and numerically. The disk angle of the valve is changed as $0^{\circ}{\sim}30^{\circ}$. The SST model is used to represent the turbulent effect in the commercial code, CFX11. It was found that the numerical results are similar to the experimental ones, general discussions are given to the pressure distributions upon the disk angle of the valve.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.200-208
• /
• 2007

A methodology for the simulation of compressible high Reynolds number flow over rigid and moving bodies on a structured Cartesian grid is described in this paper. The approach is based on a modified version of the Brinkman Penalization method. To avoid oscillations in the vicinity of the body and to simulate shcok-containing flows, a Weighted Essentially Non-Oscillatory scheme is used to discretize the spatial flux derivatives. For high Reynolds number viscous flow, two turbulence models of the two-equation Menter's SST URANS model and a two-equation Detached Eddy Simulation are implemented. Some simple flow examples are given to assess the accuracy of the technique. Finally, a moving grid capability is demonstrated.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.123-126
• /
• 2002

Very frequently the compressible flow in an extinction nozzle of gas circuit breaker is simulated under no arc assumption, which can be reasonable for both high and low current breakings. In the present study, computations are performed to investigate the major features of the compressible flows inside the arc extinction nozzle of gas circuit breaker. A fully implicit finite volume scheme is applied to solve the two-dimensional, steady, compressible, Wavier-Stokes equations. The computed results are validated with the previous experimental data available. Several types of turbulence models are explored to reasonably predict the complicated flows inside the arc extinction nozzle. The obtained results show that the shock wave boundary layer interaction inside the nozzle significantly influences the whole performance of the gas breaker.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.152-160
• /
• 2006

Time marching methods are well-suited for high speed compressible flow computations. However, it is well known that the time marching methods suffer a slow down in convergence due to disparity in Eigenvalues. A local preconditioning method is one of numerical methods to enhance convergence characteristics of low mach number flows by modifying Eigenvalues of the governing equations. In this paper, the local preconditioning method of Weiss is applied to a 2 dimensional Navier-Stokes code and the efficiency of the preconditioning method is shown through a number of computational examples.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.705-712
• /
• 2022

A sudden pressure drop caused by the pressure relief valve acts as a strong noise source and propagates the compressible pressure fluctuation along the pipe wall, which becomes a excitation source of Acoustic Induced Vibration (AIV). Therefore, in this study, the numerical methodology is developed to evaluate the reduction effect of compressible pressure fluctuation due to curved pipe in the pressure relief valve system. To describe the acoustic wave caused by density fluctuation, unsteady compressible Large Eddy Simulation (LES) technique, which is high accuracy numerical method, Smagorinsky-Lilly subgrid scale model is applied. Wavenumber-frequency analysis is performed to extract the compressible pressure fluctuation component, which is propagated along the pipe, from the flow field, and it is based on the wall pressure on the upstream and downstream pipe from the curved pipe. It is shown that the plane wave and the 1st mode component in radial direction are dominant along the downstream direction, and the overall acoustic power was reduced by 3 dB through the curved pipe. From these results, the noise reduction effect caused by curved pipe is confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.17-17
• /
• 2000

이젝터-디퓨저 시스템은 고압의 기체를 노즐로 팽창시켜서 얻은 대량의 운동에너지를 이용하여 낮은 에너지를 가지는 주변의 기체를 외부로 배출시키는데 이용되는 유체 역학적 펌프이다. 이젝터-디퓨저 시스템은 작동부가 없고 구조가 단순하여 설치/보수 및 시스템 전체의 경량화에 많은 이점이 있으므로 그 활용도가 증대하고 있는 추세이다. 그러나 이젝터-디퓨저를 지나는 초음속 유동은 복잡한 충격파 및 난류현상들로 인하여 그 물리적 특성들이 명확히 알려지지 않았다. 특히 이러한 제현상들의 간섭과 전단층의 불안정성 때문에 발생하는 비정상성은 1차 유동과 2차 유동의 혼합작용에 영향을 미쳐, 결국 시스템 전체의 배기성능을 저하시킬 뿐만 아니라, 소음과 진동을 발생시켜 시스템의 안정적인 운전을 방해한다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.327-330
• /
• 2013

Converging-diverging 노즐은 시스템 내부 유동에 적용되는 속도면적 법칙을 통해, 아음속 유동을 초음속으로 만드는 장치이며, 항공기 엔진 등에서 추력을 얻기 위해 쓰인다. 이상기체, 등 엔트로피를 가정한 동일 입구 조건에서, 출구로 빠져나오는 유동의 속도는 오직 면적 비에만 관계한다. 그러나 실제현상에서는, 출구에서의 유속이 유동의 압축성 효과 및 벽면에서의 전단력 등으로 인해 노즐 형상마다 상이한 결과를 낳는다. 본 연구에서는 EDISON Simulation을 활용하여 다양한 노즐 형상에 따른 출구에서의 Mach number를 구하고, 각각의 결과로부터 경향성을 찾는다. 또, 계산 결과를 이론식을 통해 도출되는 결과와 비교한다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.341-344
• /
• 2002

A matched asymptotic analysis is conducted for a compressible rotating flow in a cylindrical container when a mechanical and/or a thermal disturbance is imposed on the wall. The system Ekman number is assumed to be very small. The conditions for the Taylor-Proudman column in the interior, which were also given in the companion paper Park & Hyun, 2002) by means of the energy balancing analysis, have been re-derived. The concept of the variable, the energy content $e[{\equiv}T+2 {\alpha}^2 {\gamma}{\nu}]$, is reformulated, and its effectiveness in characterizing the energy transport mechanism is delineated. It is seen that, under the condition of the Taylor-Proudman column, numerous admissible theoretical solutions for interior flow exist with an associated wail boundary condition. Some canonical examples are illustrated with comprehensive physical descriptions. The differential heating problem on the top and bottom endwall disks is revisited by using the concept of the energy content. The results are shown to be in line with the previous findings.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.29-36
• /
• 2002

A numerical analysis based on two-dimensional and three-dimensional incompressible Wavier-Stokes equations has been carried out for double-circular-arc compressor cascades and the results are compared with available experimental data at various incidence angles. The 2-D and 3-D computational codes based on SIMPLE algorithm adopt pressure weighted interpolation method for non-staggered grid and hybrid scheme for the convective terms. Turbulence modeling is very important for prediction of cascade flows, which are extremely complex with separation and reattachment by adverse pressure gradient. Considering computation times, $\kappa$-$\varepsilon$ turbulence model with wall function is used.