• Journal of the Korean Professional Engineers Association
• /
• v.24 no.3
• /
• pp.51-60
• /
• 1991

• The Safety technology
• /
• no.145
• /
• pp.58-61
• /
• 2010

• The Safety technology
• /
• no.171
• /
• pp.58-61
• /
• 2012

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1493-1498
• /
• 2010

This paper present the characteristics of micro- and meso-scale milling processes in which compressed cold air, minimum quantity lubrication (MQL) and $MoS_2$ nanofluid MQL are used. For process characterization, the microand meso-scale milling experiments are conducted using desktop meso-scale machine tool system and the surface roughness is measured. The experimental results show that the use of compressed chilly air and nanofluid MQL in the micro- and meso-scale milling processes is effective in improving the surface finish.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.9-19
• /
• 2017

In this study, stator shroud injection in a single-stage transonic axial compressor is proposed. A parametric study of the effect of stator shroud injection on aerodynamic performances was conducted using the three-dimensional Reynolds-averaged Navier-Stokes equations. The curvature, length, width, and circumferential angle of the stator shroud injector and the air injection mass flow rate were selected as the test parameters. The results of the parametric study show that the aerodynamic performances of the single-stage transonic axial compressor were improved by stator shroud injection. The aerodynamic performances were the most sensitive to the injection mass flow rate. Further, the total pressure ratio and adiabatic efficiency were the maximum when the ratio of circumferential angle was 10％.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.164-173
• /
• 2011

In the present study, the stability of a compressed air energy storage cavern was numerically assessed by concrete plug shapes in order to investigate the optimal shape of concrete plug. The concrete plugs were cylindrical, embedded cylindrical, tapered, and wedged in shape. The stability assessment was carried out based on factor of safety through a strength reduction method and a volume ratio which refers to the ratio of the volume of yield regions in concrete induced by internal pressure to all concrete volume. The results from the present study indicated that the embedded cylindrical and taper shaped plugs were mechanically more stable than the cylindrical and wedge shaped plugs. However, from a comparison of stress distributions in rock mass between the embedded cylindrical and taper shaped plugs, the taper shaped plug was found to be more optimal than the embedded cylindrical plug, since the embedded cylindrical plug caused more stress concentration in the interface between the plug and rock mass than the taper shaped plug.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.99-99
• /
• 2016

최근 홍수의 특성과 피해 양상은 과거와는 다르게 변화하고 있으며, 급격한 도시화로 인하여 기존 하천유역의 저류 능력이 감소하였는데 이러한 한계를 극복하기 위하여 이미 외국에서는 대심도 터널을 활용한 홍수재해 관리방안이 오래전부터 활용되어 왔다. 본 연구에서는 현재 서울시에 건설중인 '신월 빗물저류배수시설' 연속강우 시 대심도 터널의 수리적 안정성 평가와 운영방안 수립을 위한 수리모형실험을 실시하였다. 모형은 Froude 상사법칙을 사용하여 원형의 1/50크기로 제작하였다. 모형의 전체 저류 가능량은 모형기준 $2.78m^3$ (원형 $347,778m^3$)이며, 터널 내 잔류수는 전체 저류 가능량의 0 ~ 100%까지 10%씩 변화시켜 실험 CASE를 선정하였다. 각 실험CASE별 수직 유입구 안정성 평가를 실시한 결과 터널 내 잔류수가 10%~80%까지 존재 할 때는 저지수직구1에서의 압축공기 폭발현상으로 인한 월류현상이 발생하였으며, 10%~40%까지는 저지수직구2에서 월류현상이 발생하였다. 하지만 고지수직구에서는 모든 CASE에서의 공기폭발 현상 및 월류현상이 발생하지 않아 유입성능 및 공기배출 성능이 충분히 발휘되고 있는 것으로 분석되었다. 또한 저지수직구1에서의 월류현상 발생 시점은 5분55초에서 3분42초까지 빨라졌으며 저지수직구2에서의 월류현상 발생 시점은 5분57초에서 4분57초로 빨라졌다. 이는 터널 내 잔류수량이 증가할수록 터널 내 만관시점이 빨라져 발생하며, 저지수직구1,2에서의 압축공기 폭발현상 및 월류 현상은 터널 내에서 발생한 반사파의 영향으로 판단된다. 차후 터널 내 반사파 발생에 대한 연구가 추가적으로 진행되어야 할 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.547-553
• /
• 2006

To know the effect of pigments on the material properties of color concrete, mortar and concrete tests were carried out by the using 5 kinds of pigment. The major component of red, yellow and black pigments was iron oxide and coloring component of blue and green pigments was copper phthalocyanine. Properties of mortar and concrete were some of difference according to adding ratio and kind of pigments. In case of using red, yellow and black pigments, setting time of concrete speeded a little and compressive strength was tendency to increase and slump or air content of concrete was same or decreased. On the other hand, in case of using green and blue pigments, compressive strength of concrete decreased largely because of the excessive air entrainment of surfactant and sump or air content of concrete increased highly. When the antifoaming agent was added to the color concrete mixed with green and blue pigments, compressive strength of concrete was improved and similar to that of concrete without pigment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.26-31
• /
• 2011

In this study, it made to run conventional single direct injection(DI) diesel engine, which adapted bulk combustion system not following spark ignition system without any ignition apparatus. It was heated and controlled inlet-air into conventional single DI diesel engine. The maximum value of brake thermal efficiency was at 35 region of air-fuel ratio. On the contrary, when the region of air-fuel ratio leaner than 35, brake thermal efficiency was decreased suddenly. And brake thermal efficiency was increased as much as inlet-air heating temperature increased. So, when air-fuel ratio was decreased and inlet-air heating temperature was higher, the engine was in optimal operation condition.

• Water for future
• /
• v.26 no.1
• /
• pp.71-79
• /
• 1993

Nonlinear characteristics of air pressure variation and wave transformation of a fixed air-chamber structure are discussed theoretically and experimentally. Two analytical methods(method I and II) based on the perturbation method and Green's formula are employed in order to evaluate nonlinearities by the submerged and semi-submerged air-chamber structure. Moreover, an air compression model is newly developed to estimate the dynamic air pressure in the air-chamber inside the structure, assuming the Boyle-Charles's law with adiabatic process in the air pressure variation. Theoretical values of the method I considering evanescent mode waves at an fictious boundary, are in good agreement with those of method II employing the fictious boundary which is not affected by evanescent mode waves. Both theoretical values are shown to agree well with experimental values.