• Title/Summary/Keyword: 압전 복합체

Search Result 48, Processing Time 0.026 seconds

Design of an Ultrasonic Transducer with 1-3 Mode Piezocomposites and Fabrication of its Prototype (1-3형 압전복합체를 이용한 초음파 탐촉자 설계 및 시작품 제작)

  • 한교훈;노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.8
    • /
    • pp.48-57
    • /
    • 1998
  • 본 논문에서는 순수 압전세라믹에 비해 동등이상의 압전특성을 가지면서도 음향임 피던스가 월등히 낮은 1-3형 압전복합체를 이용한 탐촉자의 개발에 관해 연구하였다. 압전 복합재료 탐촉자는 그 자체만으로 측정대상체와의 음향임피던스 차를 최소화하여 별도의 정 합층을 필요로 하지 않는 특징을 가진다. 이를 위하여 본 연구에서는 복합재료에 사용되는 고분자 재료의 물성값 설계와, 압전세라믹과의 적절한 배합구조와 형상의 결정에 설계의 주 안점을 두었다. 그 결과를 바탕으로 압전복합체 초음파 트랜스듀서 시작품을 제작하고 그 성능을 분석하였으며, 이론적인 시뮬레이션 결과와의 비교를 통해 설계이론의 타당성을 검 증하였다. 본 연구에서는 수립되어진 압전복합체 트랜스듀서의 설계 및 제작기법은 향후, 측 정대상체와의 정합을 위해 정합층에 대해 복잡한 설계 및 제작공정을 거쳐야하는 다양한 탐 촉자 개발에 유용하게 활용될 수 있을 것이다.

  • PDF

Design of an Ultrasonic Transducer with 1-3 Mode Piezocomposites and Fabrication of its Prototype (1-3형 압전복합체를 이용한 초음파 탐촉자 설계 및 시작품 제작)

  • 한교훈
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.06d
    • /
    • pp.1-4
    • /
    • 1998
  • 본 논문에서는순수 압전세라믹에 비해 동등이상의 압적특성을 가지면서도 음향임피던스가 월등히 낮은 1-3형 압적복합체를 이용한 탐촉자의 개발에 관해 연구하였다. 압전 복합재료 탐촉자는 그 자체만으로 측정대상체와의 음향임피던스 차를 최소화하여 별도의 정합층을 필요로 하지 않는 특징을 가진다. 이를 위하여 본 연구에서는 복합재료에 사용되는 고분자재료의 물성값 설계와, 압전세라믹과의 적절한 배합구조와 형상의 결정에 주안점을 두었다. 그 결과를 바탕으로 압전 복합체 초음파 트랜스듀서 시작품을 제작하고 그성능을 분석하였으며, 이론적인 시뮬레이션 결과과의 비교를 통해 설계이론의 타당성을 검증하였다.

  • PDF

Fabrication of a 2-2 Mode Piezocomposite and Derivation of its Equivalent Properties (2-2형 압전복합체 제작 및 등가 물성 도출)

  • Shin, Ho-Seop;Roh, Yong-Rae
    • The Journal of the Acoustical Society of Korea
    • /
    • v.30 no.8
    • /
    • pp.436-445
    • /
    • 2011
  • In this paper, equivalent properties of 2-2 mode piezocomposites were studied. Variation of the properties of 2-2 mode piezocomposites was analyzed by the finite element method, and the result was compared with experimental measurement data to confirm the validity of the analysis. The equivalent properties of a single phase material to represent the piezocomposite composed of PZT-5H and polymer were derived by the asymptotic averaging method. Accuracy of the derived equivalent properties was enhanced by minimizing the discrepancy between the impedance spectra of full 2-2 piezocomposite and equivalent single phase material resonators of various vibration modes by the least square method. The equivalent properties of 2-2 piezocomposites derived in this study can be utilized to the design of diverse acoustic sensors.

Derivation of Single Phase Material Properties Equivalent to 1-3 Piezoelectric Composites by the Resonant Method (공진법을 이용한 1-3형 압전복합체의 단일상 등가물성 도출)

  • Kim, Jin-Wook;Pyo, Sung-Hun;Roh, Yong-Rae
    • The Journal of the Acoustical Society of Korea
    • /
    • v.30 no.7
    • /
    • pp.368-376
    • /
    • 2011
  • Piezoelectric composites have been widely used in broadband acoustic transducers because of their lower acoustic impedance and higher electro-mechanical coupling factor. However, their complex structure has placed many limitations on the design of various transducers. This paper suggests the methodology to substitute the 1-3 piezocomposites by a single-phased material that has properties equivalent to those of the piezocomposites. The resonant method and finite element analysis (FEA) are used to derive the equivalent properties that can accurately depict resonant properties at various vibration modes of the piezocomposites. Validity of the suggested method is confirmed by comparing frequency characteristics of fabricated 1-3 piezocomposite specimens and FEA models. Further, accuracy of the derived material constants is checked by applying the equivalent properties to FEA models of the single phase material for various resonant modes.

Development of 1-3 Piezocomposite Ultrasonic Transducers by means of the Finite Element Method (유한요소 해석법을 이용한 1-3형 압전복합체 초음파 트랜스듀서의 개발)

  • 이수성;김동현;한진호;노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.23 no.4
    • /
    • pp.274-281
    • /
    • 2004
  • In this study. a 1-3 piezo-composite single element ultrasonic transducer was designed with a commercial finite element analysis (FEA) code. PZf1ex and developed based on this design. Design with FEA could be performed overcoming many constraints of the typical theoretical method, and also was very practical. Validity of the design with the FEA was illustrated through experimental characterization of fabricated 1-3 piezo-composites and ultrasonic transducers, Through comparison with the result of the theoretical method. we confirmed the superiority of the design method using FEA.

필름 스피커 적용을 위한 PZT/polymer 복합체의 후막 제조 및 압전 특성 평가

  • Son, Yong-Ho;Eo, Sun-Cheol;Kim, Seong-Jin;Gwon, Seong-Yeol;Gwon, Sun-Yong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.346-346
    • /
    • 2007
  • 압전세라믹 재료는 현재 압전 변압기, actuator, transducer, sensor, speaker 등에 광범위하게 이용이 되고 있다. 이 중에서 압전세라믹 소결체를 이용한 스피커의 제조는 가공이 까다롭고, 대형의 크기로 제작 시 소자가 깨지는 등의 많은 제약을 받고 있으며, 저음 특성이 떨어져 응용 범위가 한정되어 있다. 따라서 최근에는 이러한 단점을 극복하기 위하여 세라믹/고분자 복합체를 이용한 필름 스피커를 제작하고자 시도하고 있다. 이러한 세라믹/고분자 0-3형 압전 복합체를 이용할 경우, 제품의 경량화를 실현할 수 있고, 크기나 환경의 영향을 거의 받지 않으므로, 고기능성 스피커로의 응용에 적합할 것으로 보인다. 따라서 본 연구에서는 PZT계의 세라믹와 PVDF, PVDF-TrFE, Polyester, acrylic resin 등의 여러 고분자 물질과의 복합체를 제조하여 압전특성을 평가하였다. 본 실험은 먼저 $(Pb_{1-a-b}Ba_aCd_b)(Zr_xTi_{1-x})_{1-c-d}(Ni_{1/3}Nb_{2/3})_c(Zn_{1/3}Nb_{2/3})_dO_3$ (이하 PZT라 표기)의 최적화 조성을 선택하여, $1050^{\circ}C$에서 소결된 분말을 48시간 ball milling방법 로 약 $1{\mu}m$ 크기로 분쇄하였다. 고분자 물질들은 알맞은 용제들을 선택하여 녹였다. 그 다음 소결된 PZT분말과 고분자를 50:50, 60:40, 65:35, 70:30등의 무게 분율로 혼합하고, 분산제, 소포제 등을 첨가하여 3단 roll mill을 이용하여 충분히 분산시켜 페이스트 (Paste)를 제조하였다. 제조된 페이스트를 ITO가 코팅된 PET필름 위에 스크린 프린팅 법을 사용하여 인쇄하여 $120^{\circ}C$에서 5분간 건조하였다. 코팅된 복합체의 두께는 약 $80{\mu}m$ 정도로 측정되었다. Ag 페이스트를 이용한 상부 전극 형성에도 스크린 프린팅 법을 적용하였다. 이를 $120^{\circ}C$에서 4 kV/mm의 DC 전계로 분극 공정을 수행한 후 전기적 특성을 평가하였다. 유전특성을 조사하기 위해서 LCR meter (EDC-1620)를 사용하였고, 시편의 결정구조는 XRD (Rigaku; D/MAX-2500H)을 통해 분석하였으며, 전자현미경(SEM)을 이용하여 미세구조를 분석하였다. 압전 전하상수$(d_{33})$ 값은 APC 8000 모델을 이용하여 측정하였다. PZT의 혼합비가 증가할수록 비유전율 및 압전 전하 상수 등의 전기적 특성이 증가되었다. 또 여러 고분자 물질 중에서 PVDF-TrFE 수지가 가장 우수한 특성을 보였다. 이는 PVDF-TrFE 수지가 압전성을 나타내기 때문인 것으로 판단되었다.

  • PDF

Measurement of All the Material Constants of PVDF (PVDF 복소수 탄성, 유전, 압전 상수 측정)

  • 노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.10 no.5
    • /
    • pp.60-68
    • /
    • 1991
  • 압전 복합체 PVDF 의 복소수 탄성, 유전, 압전 상수를 측정하였다. 사용된 방법은 각각 초음파 투과법, 임피던스 분석법, 탄성 표면과 측정을 통한 수치해석을 이용하였고, 측정 치중 일부는 이미 보 고된 값들과 비교해보았다. 측정치의 신뢰성 증명을 위해 동일 기법을 압전 세라믹 PZT-5H에 적용해 검증하였다.

  • PDF

Aerosol deposition method로 제작된 세라믹 후막 및 복합체 후막의 유전특성에 대한 연구

  • Jo, Seong-Hwan;Yun, Yeong-Jun;Kim, Hyeong-Jun;Kim, Hyo-Tae;Kim, Ji-Hun;Nam, Song-Min;Baek, Hong-Gu;Kim, Jong-Hui
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.311-311
    • /
    • 2010
  • Aerosol deposition method(ADM)은 상온에서 에어로졸화 된 고상의 원료분말을 노즐을 통해 분사시켜 소결과정을 거치지 않고도 상온에서 고밀도 후막을 제조할 수 있는 공정이다. 이러한 Aerosol deposition method의 장점은 상온에서 고밀도 후막을 제조할 수 있고, 다양한 재료의 코팅이 가능하며, 코팅층의 조성 및 화학 양론비의 제어가 용이하다. 본 연구에서는 많은 장점을 가지고 있는 Aerosol deposition method를 이용하여 높은 유전상수, 압전계수, 초전계수를 갖는 $BaTiO_3$ 분말을 원료로 하여 압전소자, 커패시터, 고전압용 유전체 등에 응용이 가능한 유전체 형성에 관한 연구를 진행하였다. 또한 $BaTiO_3$ 같은 강유전체 세라믹을 이용하여 여러 가지 소자를 제조하는 경우 소자의 미세조직에 따라 물성이 영향을 받는 것으로 확인되어져 있다. 이에 본 연구에서는 세라믹 분말보다 상대적으로 탄성이 큰 polymer 분말 중 높은 유전율을 갖고 압전특성이 있는 Polyvinyl difluoride(PVDF)를 선정하여 $BaTiO_3$ 분말에 첨가하여 동시분사법을 사용해 복합체 후막을 성장시켰고, 또한 금속 분말을 첨가하여 동시분사법을 사용해 복합체 후막을 성장시켰다. 성장된 복합체 후막은 유전율과 유전손실 그리고 leakage current, breakdown voltage, 미세구조 분석 등 다양한 분석이 이루어 졌으며, embedded capacitor 유전체 층으로 응용 가능성을 가늠하였고, 상온에서 제조된 유전체 층의 응용을 위한 최적의 공정조건을 제시하고자 한다.

  • PDF

Numerical analysis for electro-mechanical coupling performance of 1-3 type Piezo-composite (1-3형 압전복합체의 전기-기계 결합성능에 대한 수치해석)

  • Shin, H.Y.;Kim, J.H.;Lim, S.J.;Im, J.I.
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.21 no.6
    • /
    • pp.253-258
    • /
    • 2011
  • Electro-mechanical coupling performance ($k_t$) of a 1-3 type Piezo-composite was analyzed numerically using FEM. The calculated physical properties of the PZT ceramics were compared with the experimental data and the accuracy of the numerical method was verified. Also the $k_t$ of the composite was analyzed with the vol% and the material properties of the constitutional parts, and the aspect ratio of the PZT rod. As the simulated results, the $k_t$ increased rapidly when the vol% of the PZT ceramics increased up to 30 vol% and saturated the constant value in the above region. And the composite using the soft matrix polymer than the hard one have the superior $k_t$ characteristics. The $k_t$ was greatly influenced by the aspect ratio of the PZT rod up to 30 vol% of PZT ceramics. To improve the $k_t$ characteristics, it is useful that the composite consist of the relatively flexible polymers and the PZT material having the excellent piezoelectric characteristics.