• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.193-199
• /
• 2001

Active control of forced vibration of the cantilevered laminated composite plates using collocated piezoceramic sensor/actuator is analyzed numerically and verified experimentally for various fiber orientations. Impact on the stiffness and the damping properties is studied by varying stacking sequence of [$\theta$$_{4}$O$_{2}$90$_{2}$]s for the laminated composite plate. For the forced vibration control, the plate is excited by one pair of collocated PZT exciters in resonance and its vibrational response is suppressed by the other collocated PZT sensor/actuator using direct negative velocity feedback. It is shown that the active control of forced vibration is more effective for the smart laminated plate with higher modal damped stiffness(2ζ$\omega$/aup 2/) .

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.154-157
• /
• 2000

Distributed piezoelectric sensor and actuator system has been designed for the active vibration control of shell structure. PVDF is used for the materials of sensor/actuator. To prevent the adverse effect of spillover, distributed modal sensor/actuator system is established. Although shell structure is three-dimensional structure, the PVDF sensor/actuator system can be treated as two-dimensional Finite element programs are developed to consider curved structures having PVDF modal sensor/actuator. The nine-node Mindlin shell element with five nodal degree of freedoms is used for finite element discretization. The electrode patterns and lamination angle of PVDF sensor/actuator are optimized to design the modal sensor/actuator system Genetic algorithm is used for optimization. Sensor is designed to minimize the observation spillover, and actuator is designed to minimize the system energy of the control modes under a given initial condition. Modal sensor/actuator for the first and second modes of singly curved cantilevered shell structure are designed using mentioned methods. Discrete LQG method is used as a control law. Experimental demonstrations of the active vibration control with designed sensor/actuator system have been performed successfully.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.393-396
• /
• 1999

본 논문에서는 흡음 재료와 압전 재료를 부착시켜 넓은 대역에서 소음 저감을 향상 시키는 압전 지능패널(piezoelectric smart panel)을 구성한 후 이를 통하여 구조물로부터 복사되는 소음의 저감 성능을 실험적으로 고찰 하였다. 우선, 단빌 평판과 흡음 재료가 부학된 편판을 구성하여 소음 저감 성능을 즉정 하였다. 그리고 두 방법을 합성하여 광 대역에서의 소음을 저감 시키기 위해 흡음 재료와 압전 재료를 부착한 압전 지능패널을 이용하여 감지기로부터 측정된 신호를 적절한 부 이득(negative gain)을 거쳐 작동기에 되먹임 하였을 때의 소음 저감 성능을 측정 하고 앞의 두 결과와 비교하였다. 실험 결과로부터 수동적 방법과 능동적 방법을 복합적으로 구성한 압전 지능패널이 넓은 주파수 대역에서 소음을 저감 시킬 수 있음을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.170-178
• /
• 2012

This paper is concerned with the development of power amplifier and controller for piezoelectric actuator and sensor used in smart structures. Even though a high-voltage power amplifier is provided in the form of an operational amplifier, a very high DC voltage is still necessary as a power supply. In this study, we propose a low-cost design for the power amplifier including the DC power supply. We also need a controller on which a control algorithm will be mounted. In general, a digital signal processing chip is popularly used because of high speed. However, only commercial product is available for smart structure applications. In this paper, a controller consisting of a DSP and electronic circuits suitable for piezoelectric sensor and actuator pair is proposed. To validate the proposed controller with power amplifier, experiment on smart structure was carried out. The experimental results show that the proposed control system can be effectively used for smart structure applications with low cost.

• 소음진동
• /
• 제7권1호
• /
• pp.161-168
• /
• 1997

The present paper describes the vibration control experiment of composite plates with bonded piezoelectric sensor and actuator. The system is modeled as two degree-of-freedom system using modal coordinates and the system parameters are obtained from vibration tests. Kalman filter is adopted for extracting modal coordinates from sensor signal, and control algorithms applied to the system are Linear Quadratic Gaussian(LQG) control, Bang-Bang Control (BBC), Negative Velocity Feedback(NVF), Proportional Derivative Control(PDC). From observation of the spillover and control perfomance, it is concluded that a higher order control algorithm such as LQG rather than BBG, NVF, PDC is suitable for efficient simultaneous control of both bending and twisting modes of composite plates.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.950-957
• /
• 2003

This paper deals with adaptive fuzzy logic controller design to achieve proper dynamic response of a composite thin-walled beam with a tip mass. In order to check the effectiveness of this controller, three different types of control logic are selected and applied. The adaptive control capabilities provided by a system of piezoactuators bonded or embedded into the structure are also implemented in the system. Results show that the fuzzy logic controller is more effective than the proportional or velocity feedback controller for the vibration control of composit thin-walled beam with a tip mass.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.54-63
• /
• 1993

This paper presents the dynamic modeling and control methodology to arrest structural deflections of industrial robotic manipulators featuring elastic members retrofitted with surface bonded pizoelectric actuators and sensors. The cynamic modeling is accomplished by employing a variational theorem, prior to developing a finite element formulation. This finite element formulation accounts for both original robot member elements and also bonded piezoelectric material elements. The governing equation of motion is then modified by condensing the electric potential vectors and subsequently two different negative velocity feedback controllers are established; a constant-gain feedback controller and a constant- amplitude feedback controller. By adopting a Model P50 articulating industrial robot manufactured by Gerneral Electric Company, conputer simulations are underlaken in order to demonstrate superior performance characteristics to be accrued from this proposed methodology such as smaller deflections at the end-effector.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.67-74
• /
• 2002

본 논문에서는 18절점 가정 변형률 솔리드 요소를 이용하여, 기계적 물리량과 전기적 물리량이 완전히 연성된 정적 문제를 해석할 수 있는 유한요소 정식화 과정을 유도하였다. 요소 결점의 축방향 변위 자유도 외에 전기 자유도를 추가하여 주어진 변위와 하중에 의해 발생하는 유도전압을 계산할 수 있다. 또한 가정 변형률 요소를 사용함으로써 박판형 구조물을 모델할 때 발생할 수 있는 잠김현상을 해소하였다. 유도된 유한요소 정식을 바탕으로 프로그램을 작성하였으며, 몇가지 수치예제에 적용하여 작성된 코드를 검증하였다. 본 요소를 이용하여, 여러 가지 변수가 THUNDER의 작동변위에 미치는 영향을 분석하였다. 이를 통하여, 특정한 재료와 곡률을 갖출 경우 THUNDER의 작동성능이 향상됨을 확인하였다.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.539-543
• /
• 2012

셀룰로오스 EAPap 작동기는 생체 모방형 작동기의 하나로 생체적합하고 가볍고 비교적 낮은 전압에서도 큰 변위를 발생시킨다는 장점을 가지고 있다. 셀룰로오스를 재생하면서 셀룰로오스 파이버를 배열함으로써 압전 종이를 만들었다. 한편 셀룰로오스에 탄소나노튜브, 산화금속 나노분말, 전도성 고분자, 이온성 유체등을 물리적, 화학적으로 결합시켜 다양한 하이브리드 나노복합재를 만들었다. 본 논문에서는 셀룰로오스 EAPap 의 제조공정 및 이를 응용한 바이오센서, 화학센서, 유연트랜지스터, 그리고 작동기의 응용 디바이스에 대해 소개한다. 또한 셀룰로오스 EAPap 을 무선으로 구동하는 기술에 대해 소개한다. 이는 생체모방로봇, 정찰 등에 활용될 수 있다.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.261-266
• /
• 2001

The flexural vibration of laminated composite beams with active and passive constrained layer damping has been investigated to design a structure with maximum possible damping capacity. The equations of motion are derived fro flexural vibrations of symmetrical,. multi-layer laminated beams. The damping ratio and model damping of the first bending mode are calculated by means of iterative complex eigensolution method. The direct negative velocity feedback control is used for the active constrained layer damping. It is shown that the flexible laminated beam is more effective in the vibration control for both active and passive constrained layer damping. and this paper addresses a design strategy of laminated composite under flexural vibrations with constrained layer damping.