• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6060-6065
• /
• 2013

Minimizing the height of the die roll is very important for maximizing the size of effective shear planes. In this study, the die roll change was investigated for the change in the amounts and clearance of the V-ring indentation. Shear analysis and experiments were conducted with the V-ring distance fixed to 2mm. Fine blanking die was applied to the die insert with different clearances. Several specimens were analyzed about the height of the die roll. As a result, the pressure of V-ring effectively inhibited the flow of materials. And the height of the die roll was lowest when the clearance between the die and punch was 1% of the material thickness.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.75-83
• /
• 2010

Laminated composite plates have shown their superiority over metals in applications requiring high specific strength, high specific modulus, and so on. Therefore, they have used in various industry. However, they have poor resistance to impact compared to typical metal materials. So, many researchers have investigated about impact behavior of laminated composite plate. To investigate impact behavior of laminated composite plate, we have to calculate contact force between impactor and laminated composite plate at the first. Impactor's equation of motion, plate's equation of motion and correlations for indentation were solved to know the contact force at the same time. In this study, low velocity impact behavior of composite plate was investigated using the finite element program which is involved the classical Hertzian law, Sun's law and Sun & Yang's experimental law and Sun & Tan's experimental law considering the stacking method.

• Composites Research
• /
• v.31 no.5
• /
• pp.260-266
• /
• 2018

This study investigates thermal and mechanical characterization of Hafnium carbide coating on the $C_f-C$ composites. The hafnium carbide coatings by vacuum plasma spray on the C/C-SiC composites are prepared to evaluate oxidation and wear resistance. We perform the thermal durability tests by thermal cycling at $1200^{\circ}C$ for 10cycles in air and investigates the weight change of each cycle. We also evaluate the wear and indentation behavior using tungsten carbide ball indenter as a mechanical evaluation. As a result, the HfC coating is beneficial to reduce of weight loss during thermal cycling test and improve the elastic property of C/C-SiC composite. Especially, the HfC coating improves the wear resistance of C/C-SiC composite.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.30.2-34
• /
• 1999

The hydroforming technology has gained in importance over the last few years, because of its potential for substantial weight avings costs reduction and quality improvement such as collision property, shape fixability and rigidity of white body. However, in comparison with the traditional sheet forming process, the hydroforming is much younger and the main development efforts were made in the last 15 years. The new technology, high pressure tublar hydroforming in particular, involves many process parameters to be optimized. This paper covers a brief overview of the hydroforming simulator as well as design of die and tools. The effects of typical parameters such as internal pressure and axial compression stroke are presented. Moreover, the conditions of forming failure occurrences such as fracture and wrinkle are examinated.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.102-102
• /
• 2017

제주산 감귤생산량은 51만톤(2016년)으로 수확기에 장마 등과 같은 환경적 요인에 의해 결점과의 비율이 24.9% 정도이다. 결점과로 통칭되는 비상품과는 일부 대기업의 쥬스공장에서 수매하는 량을 제외한 대부분은 자체 농장에서 폐기처분되고 있어 많은 감귤 비상품과 처리에 많은 문제점이 노출되어 오고있다. 성주군에서는 결점과 및 비상품과가 시장에 출하되는 것을 방지하기 위하여 자체 수매하여 액비, 발효퇴비, 사료화 가공 등에 많은 비용을 투자하고 있다. 따라서 본 연구는 당도가 15 Brix에 달하는 고당도 감귤 및 참외의 비상품과를 효과적으로 착즙하여 감귤 착즙액은 생산농자재로 환원하고, 참외 착즙액은 참외조청용 원료로 사용하는 기술을 개발하고자 한다. 착즙장치는 PLATE형 스크류, 테퍼 스크류 하우징, 파쇄된 과즙을 마지막 단계인 압입하는 고깔부 및 동력을 공급하는 구동부로 구성하였다. 개발한 고액분리 착즙장치의 외형은 $W1,000{\times}L2,000{\times}H1,070$이고 사용동력은 0,75kw, 1/30 감속모터를 사용하였다. 일반적인 착즙장치는 1단 분쇄와 동일 원통형의 스크류 압착으로 고액분리를 위한 착즙이 이루어지기 때문에 처리량이 150kg/hr에 불과하지만 개발한 고액분리장치는 2차 분쇄와 원통형과 원추형의 스크류 압착 후 고액분리망을 통과하도록 하여 500kg/hr 이상을 착즙이 가능하도록 개발하였다. 따라서 농산물의 고액분리를 통한 농산물의 가공을 위한 연속 착즙 장치는 2단 분쇄와 원통형 및 원추형 압착 미세망을 이용한 고액분리 착즙기는 기존 착즙기에 비하여 처리량이 3배 이상 증가되었다는 것을 알 수 있었다. 기존 감귤 착즙기의 수율은 60%정도이나 개발 착즙기의 착즙 수율은 66.5%로 나타나 본 연구에서 개발한 착즙기의 수율이 기존 착즙기의 수율보다 약간 높게 나타났다. 기존 착즙기는 원료(농산물의 종류)의 종류나 전처리에 제한이 있어 전용으로 사용하는데 비해 본 연구에서 개발한 고액분리 착즙기는 원료의 종류나 전처리 상태에 관계없이 사용 가능함을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.263-273
• /
• 2016

The effect of recirculated exhaust gas on performance and exhaust emissions with FGR rate are investigated by using a natural circulation, pressurized draft and water tube boiler with FGR system operating at several boiler loads and over fire air damper openings. The purpose of this study is to apply the FGR system to a power plant boiler for reducing $NO_x$ emissions. To activate the combustion, the OFA with 0 to 20% is supplied into the flame. When the suction damper of two stage combustion system installed in the upper side of wind box is opened by handling the lever between $0^{\circ}$ and $90^{\circ}$, also, the combustion air supplied to burner is changed. It is found that the fuel consumption rate per evaporation rate did not show an obvious tendency to increase or decrease with rising the FGR rate, and $NO_x$ emissions at the same OFA damper opening are decreased, as FGR rates are elevated and boiler loads are dropped. While a trace amount of soot is emitted without regard to the operation conditions of boiler load, OFA damper opening and FGR rate, because soot emissions are eliminated by the electrostatic precipitator with a collecting efficiency of 86.7%.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.127-137
• /
• 2018

Gravel Compaction Pile (hereinafter referred to as GCP) is a ground improvement technique by packing crushed stones on fragile clay ground, pressing it, and forming stakes on the foundation. Although many researchers have analyzed stress behavior of GCP composite ground on domestic GCP technique using laboratory experiment and field experiment, analyses of stress behavior according to the difference of stiffness of mat foundation loaded on the upper foundation of GCP composite ground have not been done actively. Therefore, this study aimed to identify the stress concentration ratio in accordance with the difference of basis stiffness by interpreting figures. To perform this, replacement ratio was changed and modelled using ABAQUS, software for finite element analysis and analyzed the stress concentration ratio, amounts of settlement, and maximum amounts of horizontal displacement of composite ground in accordance with the difference of stiffness. An analysis showed that the stress concentration ratio of rigid foundation was highly assessed than unloading of flexible foundation in case of unloading, while amounts of settlement under flexible unloading condition were slightly higher than under rigid condition. This indicates that the characteristic of stress behavior on the different stiffness of upper foundation needs to be clarified. In addition, the maximum horizontal displacement was generated in a constant level regardless of the difference of stiffness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.955-962
• /
• 2015

The Vickers test can be used for all types of materials, and it has one of the widest scales among hardness tests. The hardness may be considered as a probability variable when evaluating the mechanical properties of materials. In this study, we investigate the statistical properties of the bending strength and Vickers hardness in $ZrO_2$ monolithic and $ZrO_2/SiC$ composites depending on the amount of $TiO_2$ additives. The bending strength and Vickers hardness were found to agree well with the Weibull probability distribution. We evaluate the scale parameter and shape parameter in as-received $ZrO_2$ and $ZrO_2/SiC/TiO_2$ ceramics, as well as their heat treated ceramics. We also evaluate the parameters in accordance with the increase in in the indentation load.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.1-8
• /
• 1972

The characteristics of tunnel diode pair circuit biased within the negative resistance region has also the voltage-control type negative resistance region, and the voltage at the center point of negative resistance region is described as the square-wave relaxation oscillation. In this paper, the period T, positive duration T1, negative duration T2 of the pulse are obatined from the characteristic curve T, positive duration T1, negative duration T2 of the pulse are obtained from the characteristic curve and observed actually, considring the fact that the pulse width and the period of square-wave at the center point of the negative resistance region is able to be controlle dby the blas volgate. Mereover, the relationship between T, T1 or T2 and circuit parameters is searched for and the Circuit parameters that satisfy the conditions of T1-T2 being proportional to the variation of bias voltage with Teonstant are determined. Thereafter, the bias voltage and the signal voltage are inserted serially to the PWM circuit and the characteristics of that circuit is analyzed.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.37-45
• /
• 1996

Marine bacterial strain, highly effective agar degrading, was isolated from south sea of Korea and was identified as Pseudomonas sp. This strain was named Halophilic Pseudomonas sp. W7 and accumulated an extracellular agarase which showed a high level of enzyme activity in the presence of agar and agarose. This extracellular agarase was purified by anion-exchange chromatography and gel filtration. Purified agarase showed a single protein band upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis and its molecular weight was estimated to be about 89KDa. The agarase gene was cloned into Escherichia coli JM83 using the plasmid vector pUC19. DNA fragments(3.7, 3.0Kb) of Hind III-digested chromosomal DNA of Pseudomonas sp. W7 was inserted into the Hind III site of pUC19. Selected transformants, E. coli JM83/pSWl 000000and E. coli JM83/pSW3, produced agarase and this agarase was accumulated In the cytoplasmic space.