• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.265-268
• /
• 1999

열간 박판 압연공정에서의 압연하중 압연동력을 실시간으로 계산할 수 있는 모델식을 유한요소 해석결과들을 이용하여 개발하였다 압연하중 압연동력값 결정에 비교적 큰 영향을 주는 인자들로는 형상계수 압하률, 률직경 률속도 스트립 입측온도, 탄소함량, 마찰계수들은 이론적으로 계산이 가능한 무마찰의 균일 평면 변형유 압축공정의 금형하중(F、) 동력 (P、)식을 도입함으로써 내삽모델식에서 제외시킬수 있었다 쿨롱마찰계수($\mu$) 0.3 일 경우의 유한요소해석 결과 데이터들을 내삽법(interpolation)을 통해서 다항식 형태로 {{{{ {F } over {F、 } }}}}, {{{{ { {P }_{f } } over { {P }_{d } } }}}}, {{{{ { {P }_{d } } over { {P }^{、 } } }}}} 식들을 구하였다 마찰계수에 따른{{{{ {F } over {F、 } }}}} {{{{ {P } over { {P }^{、 } } }}}}값의 변화는 형상계수에 따라 기울기가 결정되는 직선 형태로 나타내어짐을 유한요소해석 결과로부터 관찰 할 수 있었다. 이와같이 구한 압연하중 압연동력 모델식의 유효성을 검증하기 위해 무작위로 추출한 실제공정들에서 모델식으로 계산한 압연하중 압연동력 값들을 유한요소해석결과와 서로 비교해 보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.271-277
• /
• 2013

Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high-strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high-strength steel below TS 980 MPa in skin pass rolling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.855-861
• /
• 2011

We predict the rolled-strip profile for a 6-high mill using thin rolling theory and a numerical model. In the numerical model, we calculate the distributions of the contact pressures between the rolls and the rolling pressure between the strip and the work roll in the transverse direction using the geometric structure of the 6-high mill and the boundary conditions. We determine the distribution of the rolling pressure in the rolling direction via a thin-foil rolling model using Fleck's theory. We calculate the three-dimensional elastic deformation of the work roll using the pressures of the width and rolling directions. We then obtain the three-dimensional strip profile via the elastic deformation of the work roll during the rolling process. The profile is verified by a thin cold-rolling test and FE simulation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1193-1201
• /
• 1993

A new deformation resistance model for hot steel strip rolling process was formulated to improve the accuracy of roll force estimation. To improve the existing deformation resistance model more precisely, a modification function was introduced in this study. For the modification function, several factors considering material and operational conditions have been investigated and the optimal modification function was determined under the principle of minimum variability. The newly formulated modification function was applied to the deformation resistance model for ultra-low carbon steel and showed improved accuracy with about 30% decrease in terms of standard deviation of predicted roll force values against measured ones.

• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.1-6
• /
• 1996

냉간압연유는 종래보다 극심한 압연하중 및 압연속도 조건하에서도 Roll과 압연강판간의 균일한 윤활피막을 형성시켜 Heat Scratch를 방지시키고, 여러가지 종류의 압연기 특성과 압연조건에 맞는 윤활 및 마찰상태를 부여시켜 안정된 조업을 유지시켜야 한다. 또한 최근 우리나라뿐만 아니라 국제적인 환경 추세에 부응하여 기본적인 압연윤활성 및 마찰특성이외에 작업환경 개선(Mill Clean화, 폐수처리용이성, 생분해성), 보다 우수한 강판표면 품질(Oil Stain, 이물 Mark, 광택성 등)을 생산할 수 있는 특성을 나타내어야 한다. 본 보에서는 이와같은 철강용 냉간압연유의 전반적인 동향에 대해 기술코져 한다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1379-1382
• /
• 2007

In this paper, we present a simplified analytic approach for the prediction of roll force to be applicable to the grooveless rolling. The approach is based on the deformation shape deduced from physical considerations and employs the assumption that the deformation homogeneously occurs in three directions. Strain and strain rate are calculated by the geometric relationships between those components and the prescribed deformation functions. Then, stress components are obtained from the Levy-Mises' flow rule. By integrating the stress components along the rolling direction, roll force are finally obtained. The prediction accuracy of the proposed model is examined through comparison with results obtained from the finite element analysis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.129-135
• /
• 2009

In this paper, a finite element model is presented for the prediction of roll force and strip thickness in a backup-roll-drive mill. The proposed FE model is focused mainly on analyzing the elastic/plastic behavior between a work roll and a strip as well as the rigid/plastic behavior between a backup roll and a work roll. The capability of the proposed model is demonstrated through application to 4-high silicon steel rolling mill at POSCO. Results show that the predicted roll force and strip thickness rolled accurately agree with the measured them. It is also illustrated that the proper position of work roll displaced to one side from the vertical centerline of the backup-roll may be determined by minimizing the horizontal force of work roll.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.68-76
• /
• 1991

최근 열간압연의 공정이 단순하고 회수율이높은 CC재 (연속 주조재)가 IC재 (Ingot 주조재)에 비해 냉간압연 재료의 주종을 이루고있으며, Roll 조도의 급속한 저하로 슬립현상과 채터링현상 등이 발생한다. 본 연구에서는 Work Roll 마멸 및 조도 저하에 큰 영향을 미치는 (1) 압연 가공길이 및 (2) 실험 재료의 종류에 따른 영향과 (3) 압연하중에 의한 Roll 조도변화를 실제 압연가공을 통하여 분석하고, (4) 알미늄 산화 게재물의 영향과 전사율을 연구하고저 한다.

• Transactions of Materials Processing
• /
• v.6 no.6
• /
• pp.482-488
• /
• 1997

New carbon equivalent equation for the better prediction for the better prediction of roll force in a continuous hot strip mill has been formulated by applying a neural network method. In predicting roll force of steel strip, carbon equivalent equation which normalize the effects of various alloying elements by a carbon equivalent content is very critical for the accurate prediction of roll force. To overcome the complex relationships between alloying elements and operational variables such as temperature, strain, strain rate and so forth, a neural network method which is effective for multi-variable analysis was adopted in the present work as a tool to determine a proper carbon equivalent equation. The application of newly formulated carbon equivalent equation has increased prediction accuracy of roll force significantly and the effectiveness of neural network method is well confirmed in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2257-2265
• /
• 1996

In the cold rolling mill, it is very important that a constrained static flow stress of rolled strip and rolling force calculation model be exactly considered to improve an prediction accuracy for rolling forces. Therefore, in this study, the values of the constrained static flow stress are used by deriving the regression equation which is a function of rolling conditions(FDT, CT) and chemical compositions(C, Si, Mn), previously applied by making the tables of yield strength for hot coils with size. And with the consideration that an elastic deformation part of an rolled strip appears at the entry and delivery side of the contacting area between the work roll and rolled strip is calculated. By applying these methods, the more accurate prediction for rolling force is obtained. As a results, the deviation of thickness is significantly reduced in the rolling direction.