• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1363-1372
• /
• 1992

The effects on lubricity and the anti-seizure property of lubricant according to base oils and extreme pressure additives of sulfur type and phosphorous type in cold rolling were evaluated by a laboratory scale rolling mill, where the contact conditions between work roll and strip are very close to actual cold rolling mill. The important results were obtained as follows : (1) synthetic oil has better effect on lubricity than tallow, (2) lubricant with extreme pressure additives of sulfur type of phosphorous type has better effect than base oil noly, (3) the more amount of extreme pressure additives is, the better effect on lubricity is, (4) sulfur type has better effect on lubricity than phosphorous type and (6) phosphorous type has better effect on anti-seizure property than sulfur type.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.237-244
• /
• 2012

This paper studies the design of a two-DOF optimal controller for the strip gauge-tension of cold tandem mill processes, that uses a reference shaping filter and a disturbance observer. First, a mathematical model of the strip gauge and tension system is constructed using the gauge meter equation and Hooke's law, respectively. Next, a two-DOF controller considering of a feedforward controller and a feedback controller is designed. The former is based on the reference shaping filter and the disturbance observer, and the latter is based on the ILQ optimal control algorithm. Finally, it is shown through a computer simulation that the proposed optimal controller is able to improve the strip gauge accuracy and the tension variation more than the conventional MV-AGC controller.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.129-135
• /
• 2009

In this paper, a finite element model is presented for the prediction of roll force and strip thickness in a backup-roll-drive mill. The proposed FE model is focused mainly on analyzing the elastic/plastic behavior between a work roll and a strip as well as the rigid/plastic behavior between a backup roll and a work roll. The capability of the proposed model is demonstrated through application to 4-high silicon steel rolling mill at POSCO. Results show that the predicted roll force and strip thickness rolled accurately agree with the measured them. It is also illustrated that the proper position of work roll displaced to one side from the vertical centerline of the backup-roll may be determined by minimizing the horizontal force of work roll.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.265-268
• /
• 1999

열간 박판 압연공정에서의 압연하중 압연동력을 실시간으로 계산할 수 있는 모델식을 유한요소 해석결과들을 이용하여 개발하였다 압연하중 압연동력값 결정에 비교적 큰 영향을 주는 인자들로는 형상계수 압하률, 률직경 률속도 스트립 입측온도, 탄소함량, 마찰계수들은 이론적으로 계산이 가능한 무마찰의 균일 평면 변형유 압축공정의 금형하중(F、) 동력 (P、)식을 도입함으로써 내삽모델식에서 제외시킬수 있었다 쿨롱마찰계수($\mu$) 0.3 일 경우의 유한요소해석 결과 데이터들을 내삽법(interpolation)을 통해서 다항식 형태로 {{{{ {F } over {F、 } }}}}, {{{{ { {P }_{f } } over { {P }_{d } } }}}}, {{{{ { {P }_{d } } over { {P }^{、 } } }}}} 식들을 구하였다 마찰계수에 따른{{{{ {F } over {F、 } }}}} {{{{ {P } over { {P }^{、 } } }}}}값의 변화는 형상계수에 따라 기울기가 결정되는 직선 형태로 나타내어짐을 유한요소해석 결과로부터 관찰 할 수 있었다. 이와같이 구한 압연하중 압연동력 모델식의 유효성을 검증하기 위해 무작위로 추출한 실제공정들에서 모델식으로 계산한 압연하중 압연동력 값들을 유한요소해석결과와 서로 비교해 보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.63-68
• /
• 2017

This paper reviews the learning model of a forward slip ratio in order to improve the mass-flow stability and strip qualities in the hot strip finishing mill process. Firstly, it is shown, from mathematical analysis, that the significant parameters of the forward slip ratio are the tension, looper angle, and roll velocity. Secondly, a discrete-time learning model of the forward slip ratio is proposed from these parameters, which is identified by an instrumental variable (IV) identification algorithm. Finally, it is shown from computer simulation that the proposed learning model is more effective than the existing learning model.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.23-29
• /
• 2008

This study analyzes the rolled circular rod strip with radius of loom and length of 350cm by using finite element analysis. The material strength and its durability of the rolled strip can be predicted through this study. As the penetration tolerance by contact decreases, the contact rigidity of strip increases. As the contact rigidity becomes the highest at the elapsed time of 1.2 second, the contact stress becomes the lowest. On the contrary, von-Mises stress becomes highest at this time. The total deformation on strip increases from the upper part of strip at the position near to rotating roll to the lower part of strip at the position near to fixing roll.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.257-266
• /
• 1993

Computer Simulation based of divided element method was done to predict strip shape in20-high Sendzimir Mill and has been used to find a way for preventing quarter waves occurring in the wide and thin gaged strip rolling. The simulation showed that it was difficult to prevent quarter waves by the existing methods of controlling actuators such as the shifting of the first intermediate roll and the profile control of As-U-Roll in back up roll. It was, however, confirmed analytically and experimentally that quarter waves could be effectively reduce by changing taper mode at the barrel-end taper radius of the first intermediate roll.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.429-435
• /
• 2012

An abrasion due to continuous friction between a work roll and strip causes the mass of the work roll to be unbalanced in the rolling process. We developed a mathematical model for the rolling mill considering the unbalanced mass and verified the model experimentally. The work roll was approximated as a rigid rotor with eccentricity, and the effect of the unbalanced mass on chatter vibration was investigated. The joint forces computed by quasistatic analysis were applied to the work roll in the rolling mill. Transient responses were obtained, and frequency analysis was performed by solving equations of motion using a direct integration method. Horizontal vibrations were more strongly affected by eccentricity than vertical vibrations. In the horizontal direction, a small eccentricity of 1% of the work roll radius considerably increased the amplitude of the chatter frequency.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.197-201
• /
• 2001

Output and cost efficiency in the production of hot-rolled strip depend to a large content on the uniformity of geometric and mechanical properties over the length and width of the rolled end product. To ensure the homogeneous temperatures required for this during the rolling process a system to measure and evaluate the transverse temperature profile was developed and implemented in production. The systems used consist of temperature scanners and computers for measurement and data evaluation. The systems have been installed in Kwangyang hot strip mills, in the cases at the exit of the finishing train and at the entry of the coiler. They are used in production to determine the effect of the finishing train and the cooling zone on the technological properties of the hot rolled strip.

• Journal of Power System Engineering
• /
• v.19 no.4
• /
• pp.24-29
• /
• 2015

This paper designs a looper-tension controller for strip top-tail parts in hot strip finishing mills. A three-degree linear model of the looper-tension system is derived by a Taylor's linearization method, where the actuator's dynamics are ignored because of their fast responses. A feedforward shaping controller for the strip top part and a feedforward model reference controller for the strip tail part are respectively designed, they are combined with an ILQ(Inverse Linear Quadratic optimal control) feedback controller for the strip middle part. It is shown from by a computer simulation that the proposed controller is very effective to the strip top-tail parts including the middle part.