• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.163-163
• /
• 2011

평활입자동역학법(SPH, Smoothed Particle Hydrodynamics)은 붕괴파(도수, 댐붕괴류, 쇄파) 등과 같이 수면 변동이 큰 유체 역학 문제를 해결하기 위한 무격자법 중의 하나이다. SPH를 이용한 붕괴파의 모의에서는 압력, 점성, 밀도(압축성), 척력 등 다양한 계산 인자가 필요하다. 이들 인자가 SPH 모의 결과에 미치는 영향을 도수와 댐붕괴류에 대해서 검토하였다. 그 결과 압력과 관련하여, 상태 방정식 계수로 표현되는 유체의 음속은 입자들의 흩어짐 현상과 밀접한 관계를 가지는 것을 밝혀내었다. 평활 거리는 수치해의 안정성과 밀접한 관련이 있으며, 너무 작거나 크게 설정하는 경우 해의 정확도가 떨어지는 것으로 나타났다. 일반적으로 2차원 문제의 경우 20~23개 정도의 입자가 해의 내삽에 사용되는 것이 바람직하다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.34-40
• /
• 2012

A pressure control law to regulate pressure of gas generator is suggested. To design a model based control law, the governing equation which consists of Robert and conservation equation is built and verified through the ground burning test. PID and nonlinear adaptive control laws are designed to analyze the loop response characteristics under the system which has varying eigen properties arisen from combustion volume change. It is suggested that new approach, gain scheduling design, is required to overcome the defects identified from numerical simulation results of the two control laws. The newly suggested scheme shows good control performance even under disturbances and measurement noise.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1150-1160
• /
• 1993

The behavior of polystyrene in the strip cavity during the packing and cooling stages for an injection molding process is examined numerically. The mathematical model is based on the unified post-filling model and finite element/finite difference methods are used to solve simultaneously the continuity, momentum and energy equations coupled to an equation of state. Simulated results show that the density of the molded parts is lower in the core than at the skin, and that the hotter the melt or the higher the packing pressure, the higher the density in the core. The density variation during the packing stage comes up to 50% compared with the total density variation. Also, the density variation after gate sealing and the effect of cooling rate on the equation of state are negligible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.2
• /
• pp.91-97
• /
• 2002

Dynamic extinction of solid propellants subjected to rapid pressure drop was studied with the aid of energy equation of condensed phase and flame model in gas phase. It is found that the total residence time($\tau_\gamma$) which measures the residing time of fuel in the reaction zone may play a crucial role in determining the dynamic response of the combustuion to extinction. Residence time was modeled by various combinations of diffusion and chemocal kinetic time scale. Effect of pressure history coupled with chamber volume on the extinction response was also performed and was found that dynamic extinction is more susceptible in a confined chamber than in open geometry. And, dynamic extinction was revealed to be affected profoundly by diffysion time scale rather than chemical kinetic time scale.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1003-1009
• /
• 2012

Heat exchanger has been widely used in the industry which needs energy transport, and the application of the plate type heat exchanger having high efficiency has been greatly increased. In this study main design parameters are analyzed and new equations are induced. The induced formulation was compared with a commercial program in order to design an optimal heat exchanger. The equations of heat transfer coefficient and pressure drop for Chevron angles are introduced as functions of Reynolds number. The program implemented the equations is tested with Chevron angle variation. The results show that the convective heat transfer coefficients take errors within 8% and the pressure drops have errors within 5% in the analysis conditions.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2003

Thermo-acoustic waves can be generated in a compressible fluid by rapid heating and cooling near the boundary walls. These phenomena are very important mechanism of heat transfer in the space environment in which natural convection does not exist. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air filled enclosure with rapid wall heating are studied numerically. The governing equations were discretized using control volume method, and were solved using PISO algorithm and second-order upwind scheme. For the stable solution time step were considered as t=1$\times$$10^{-9}$ order, and grids are 50$\times$800. The induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. The wave showed sharp front shape and decreased with long tail.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.618-623
• /
• 2011

A pressure control law to regulate pressure of gas generator is suggested. To design a model based control law, the governing equation which is consisted of Robert and conservation equation is built and verified through the ground burning test. PID and nonlinear adaptive control laws are designed to evaluate the loop response characteristics under the system which has varying eigen properties as combustor volume is increased. It is suggested that new approach, gain scheduling design, is required to overcome the defects identified from numerical simulation results of the two control laws. The newly suggested scheme showed good control performance even under disturbances and measurement noise.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.493-493
• /
• 2012

평행평판 축전 결합 플라즈마는 증착이나 식각 등 많은 공정장비에서 사용된다. 이때 구동주파수를 높여주거나 리액터의 크기를 증가시킬 경우, 플라즈마 밀도가 불균일해진다. 플라즈마 밀도는 플라즈마 내 전기장 분포의 균일도와 관련이 있는 것으로 전기장 분포를 균일하게 만드는 것은 매우 중요하다. 이전 연구에서는 충돌 주파수(공정 압력)가 전기장의 분포에 미치는 영향에 대해 발표하였다 [1]. 본 연구에서는 구동 주파수, 충돌 주파수(공정 압력), 플라즈마 주파수(플라즈마 밀도)가 전기장 분포에 미치는 영향을 알아보았고, 이들의 상관관계를 분석하였다. 플라즈마 주파수(플라즈마 밀도)와 충돌 주파수(공정 압력)는 전기장 분포의 균일도에 영향을 주는 변수이지만 이 둘은 반대 영향을 미쳤다. 따라서 두 주파수가 전기장 분포에 미치는 영향이 균형을 이룰 때 균일한 전기장 분포를 얻을 수 있었다. 이 때 구동 주파수가 증가할수록 균일하게 하는 두 주파수의 영역이 줄어들어 높은 구동 주파수에서는 전기장 분포를 균일하게 하기 어려웠다. 이러한 관계를 이용하여 일정한 구동 주파수와 플라즈마 주파수에서 전기장 분포의 균일도를 10% 이내로 하기 위해 충돌 주파수를 결정할 수 있는 방정식을 구하고, 충돌 주파수와 플라즈마 주파수, 그리고 구동 주파수가 전기장 분포를 균일하게 하는 이들의 관계를 살펴 보았다.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.666-674
• /
• 2007

It is very important to estimate static squeezing pressure distributions for lining material of sterntube after bearing at dry dock stage since the maximum squeezing pressure value can be one of the significant characteristics representing coming navigation performances of the propulsion system. Moderate oil film pressure between lining material and propulsion shaft is also essential for safe ship service. In this paper, Hertz contact theory is explained to derive static squeezing pressure. Reynolds equation simplified from Navier-Stokes equation is centrally differentiated to numerically obtain dynamic oil film pressures. New shaft alignment technology of nonlinear elastic multi-support bearing elements is also used in order to obtain external forces acting on lining material of bearing. For 300K DWT class VLCC with synthetic bush of sterntube after bearing, static squeezing pressures are calculated using derived external forces and Hertz contact theory. Optimum partial slope of the after bush is presented by parametric shaft alignment analyses. Dynamic oil film pressures are comparatively evaluated for partially bored and unbored after bush. Finally it is proved that the partial slope can drastically reduce oil film pressure during engine running.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1272-1281
• /
• 1990

A numerical study to predict the contamination behavior in a room being contaminated has been performed. The room with one inlet and three exits, which maintained same pressure at the ceiling, has been chosen as test model. Six sets of calculation have been performed, for one, two or three contamination sources of 1*10$^{-4}$ kg$_{c}$/s strength at two different velocities(0.2m/s, 20m/s). Numerical results show that the number the contamination concentration near the first source increased by every 20%-30% of the maximum concentration for each increase of the contamination source.e.