• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.17-21
• /
• 2015

Restriction orifices in the feed and bleed circuit of nuclear power plant are designed using computer program capable of handling multiple hole cascade orifice assembly. Single hole stages of orifice assembly are alternated with multihole stages where necessary. The distance between stages is such that it allows full pressure recovery. The minimum static pressure is higher than vapor pressure at the operating temperature so that cavitation does not occur. Piping sizes are reviewed and increased if necessary to improve rigidity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2008

In this study, the design method of a 155 mm Solid Fuel Ramjet projectile is proposed and a flight performance analysis program through mathematical modelling is developed. Through flight performance analysis, ramjet performance during flight, which is comprised of thrust, specific impulse, pressure recovery ratio, location of shock waves, and magnitude of drag, was predicted. The results show that compared to Rocket Assisted Projectile(RAP), the range was increased by 90 %. Furthermore, how variations in nozzle exit area ratio and the intake area cause variations in range was observed. This research on modeling and simulation methodology will provide useful data for future development of solid fuel ramjet projectiles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.10-18
• /
• 2001

In this paper, Supersonic jets impinging on a wedge were investigated in order to acquire fundamental design data for jet deflectors. Surface pressure distributions and pressure contours were obtained using a cold flow tester producing Mach 2 supersonic jets. Schlieren system was used to visualize the flow structure on the wedge surface. Numerical computations were performed and compared with the experimental results. Both results were in good agreement. The results showed that underexpansion ratio did not affect on the surface pressure distribution when the wedge is located at the nozzle exit. With increasing underexpansion ratio, pressure recovery decreased as the wedge is located farther from the nozzle exit. In the pressure contour, it was possible to locate the region where the peak pressure on the wedge surface was occurred.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.79-84
• /
• 2005

An experimental investigation for impingement of under-expanded, axisymmetric jets on a flat plate has been conducted, and the surface pressure, the adiabatic wall temperature distributions on the plate have been measured in detail. For the explanation on the wall temperature distributions, the total temperature distributions along a free jet have also been measured with total temperature probes. In this study, the under-expansion ratio and the nozzle-to-plate distance have been considered as experimental parameters. Depending on nozzle-to-plate distances, different distributions of adiabatic wall temperature are shown by the energy separation at a jet edge and a impinged surface. Also, the recovery factor on a stagnation point decreases significantly due to the isolation of fluid particles in a central region.

• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.2
• /
• pp.93-106
• /
• 2004

본 연구의 목적은 편측성 구순구개열 (UCLP) 환자에서 술전 비치조 정형장치 (presurgical nasoalveolar molding appliance, PNAM) 와 구순 봉합수술의 치조골 정형효과를 3차원 (3-D) 분석을 통하여 평가하는 것이다. 연구대상은 16명의 UCLP 환자 (평균 파열부거리: 10.46mm) 이며 PNAM 장치에 의한 치료와 rotation-advancement법에 의한 구순 봉합수술을 받았다 처음 내원시 (평균연령: $37.0{\pm}27.89$ 일), PNAM 치료를 받고 난 후이며 구순봉합수술 1달 전 (평균연령: $119.25{\pm}40.18$ 일), 구순봉합수술 2달 후 (평균연령: $190.81{\pm}42.78$ 일)에 상악의 인상을 채득하였다. 그 후 laser scanning machine (Orapix, Dimennex, Seoul, Korea) 과 3-D view software (3Dxer, Dimennex) 를 사용하여 3-D모형을 제작하였다. 선, 각도, 정중선변이, 거리, 면적 항목을 3-D 모형상에서 계측하고, 각 시기별의 차이를 비교하기 위하여 Wilcoxon signed rank test를 사용하여 분석하였다. PNAM치료 동안과 구순 봉합수술 후에도 치조골 후방부는 안정된 구조물이었다. PNAM치료에 의한 파열부 거리의 감소는 대분절 (greater segment) 의 내측 굴곡 (bending) 에 의하여 발생하였다. 대분절 (greater segment)의 전방 성장은 PNAM치료에 의하여 억제되었으나, 구순 봉합수술 후에 회복되었다. 구순 봉합수술 후에 대분절과 소분절 사이의 전방부 각도의 증가는 구순 반흔 (lip scar) 의 압력에 의한 치조골 정형 효과 때문으로 생각된다. 정중선변이는 PNAM치료에 의하여 개선되었다. PNAM치료 동안과 구순 봉합수술 후에 구개부 (palatal segment) 의 면적은 계속 증가하였다. 치조골 면적과 거리 항목의 증가는 후방부에서 크게 나타났다. 이러한 결과는 PNAM치료에 의한 치조골 정형효과는 주로 전방부에서 발생하며, 치조골의 성장은 구순 봉합수술 후에 후방부에서 주로 발생한다는 것을 의미한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.61-69
• /
• 2020

Purpose: Zirconia fixed partial dentures with mandibular 2^nd premolar and 2^nd molar as abutments are fabricated and then the effects of inter-abutment distance on fracture resistance of zirconia fixed partial dentures is studied. Materials and Methods: The materials used in this study are Cameleon S zirconia block and S2 zirconia block, which are divided into CS Group and S2 Group applying different inter-abutment distance for each material, and the sintered zirconia fixed partial denture was luted to the epoxy resin die using a temporary luting cement, and then the fracture resistance was measured by placing a 6 mm diameter hardened steel ball on the occlusal surfaces of the pontics and applying pressure at a cross head speed of 1.0 mm/min on a universal testing machine with a load cell of 5.0 kN. Results: The fracture resistance of zirconia fixed partial dentures is not significantly affected by inter-abutment distance The fracture resistance of zirconia fixed partial dentures in CS Group was significantly higher in 15 mm of inter-abutment distance than in 13 mm and 17 mm of inter-abutment distance (P < 0.05). The fracture resistance of zirconia fixed partial dentures in S2 Group was not significantly different between the three groups (P > 0.05). Conclusion: The fracture resistance of zirconia fixed partial dentures with mandibular 2^nd premolar and 2^nd molar as abutments does not significantly affected by the inter-abutment distance.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.749-759
• /
• 2022

The paradigm of water cycle management in the watershed is changing due to the increase in abnormal climate phenomena caused by climate change and the increase in impervious area due to urbanization. Research is continuously underway based on Low Impact Development technology that can suppress water cycle distortion. In this study, factors that can reflect water cycle distortion were selected before applying LID, and the PSR index for each 148 watershed was calculated for the the Nakdonggang River basin. As of 1975, the PSR index is calculated by calculating the pressure index P, which represents the rate of change in impervious surface area to 2019, the phenomenon index S, which represents the rate of change in water cycle for each subwatershed, and the Low Impact Development area countermeasure index R. The lower PSR index value, the higher the priority management watershed, and the water cycle recovery priority management watershed was calculated in the order of 1, 2, 87, 90, 91, and 147. It is expected that the efficient application of low-impact development factors in accordance with the order of priority management of water cycle by subwatershed in the large area will contribute to the recovery of water cycle distortion.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.11
• /
• pp.141-145
• /
• 1992

심부전 환자의 심근회복을 도울 수 있는 장비인 전기유압방식 좌심실보조기를 개발하였다. 좌심실보조기는 혈액펌프, 압력펌프, 제어기로 구성되어 있으며, 혈액펌프에 내장된 혈액주머니는 동물실험을 위하여 50 ml의 크기로 제작하였다. 좌심실보조기의 성능평가를 위하여 최대 박출량을 측정하고 있으나 실험실에서 측정된 간은 동물 실험에서 관찰되는 것보다 일반적으로 증가된 박출량을 보이게 된다. 이는 생체에서는 좌심방의 체적이 박동 주기에 따라 변하여 좌심실보조기가 받아들일 수 있는 유효 혈액량이 변하는 반면, 모의순환장치에서는 좌심방을 단순 저장고로 사용하기 때문에 좌심방의 박동주기에 따른 체적변화를 감안하지 못하여 생기는 것이다. 본 실험에서는 모의순환 장치에 체적변화 가능한 100ml 크기의 좌심방을 연결하여 좌심방으로 들어오는 혈류량이 제한된 동물실험 상황을 모방하였다. 좌심실보조기의 제어방식중 수측기 이완기 비율(SD 비율)변화에 따른 좌심방 음압발생효과를 관찰한 결과 SD 비율을 40 %로 유지하면 행정거리가 클때도 좌심실의 음압발생을 줄일 수 있는 것을 관찰하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.914-921
• /
• 2017

The experimental research on a high-altitude environment simulation of space launch vehicle is important for securing independent technologies with launching space vehicles and completing missions. This study selected an altitude of 65 km for the experiment environment where it exceeded Mach number of 6 after the launch of Korean Space Launch Vehicle(KSLV-II). Shock tunnel was used to replicate the flight condition. After flow establishment, in order to confirm aerodynamic characteristics and normal and oblique shockwaves, the flow verification was carried out by measuring stagnation pressure and heat flux of a forebody model, and shockwave stand-off distance of a hemispherical model. In addition, a shock-free technique to recover free-stream condition has been developed and verified. From the results of the three verification tests, it was confirmed that the flow was replicated with the error of about ${\pm}3%$. The error between the slope angle of inclined shockwave of the scaled down transition section model using the shock-free shape and the slope angle of the horizontal plate model, and between the theoretical and the experimental value of the static pressure of the model were confirmed to be 2% and 1%, respectively. As a result, the efficiency of the shockwave cancellation technique has been verified.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.787-797
• /
• 2022

The purpose of this study was to confirm the reduction of pain and symptom relief of Parkinson's disease by vertically stimulating the spine through the application of a mechanical bed capable of thermal and massage stimulation. For this purpose, after confirming the segmental motion of the spine due to the use of a medical combination stimulation bed for Parkinson's disease patients, VAS, ODI, gait ability, and spiral drawing tests were performed, and the relationship between the variables was identified. In the 10-day visual analog scale and evaluation of low back pain dysfunction, the average trend of decreasing after bed use was confirmed. For walking ability, a decrease in the moving time and an increase in the moving distance were observed. In the spiral drawing test, the mean test time after using bed was significantly lower than before. As a result, it suggested the possibility of using it as an auxiliary method for recovery and pain relief of Parkinson's disease patients due to spinal segmental movement with mechanical heating and massage. However, this study is a preliminary study, and there is a small number of subjects, so additional research is needed that considers the number and condition of future subjects in detail.