• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.30-40
• /
• 1994

고분자 물질의 신장점도를 측정하기 위하여 설계된 수렴관을 지나는 시험 유체 M1 에대하여 유한요소방법으로 수치모사를 수행하였다. 구성방정식은 세 개의 이완시간을 가진 적분형 K-BKZ모형을 사용하였다. 신장변형이 지배적이고 변형속도가 매우 큰 흐름에 대하 여 실험적 방법으로 측정이 가능한 범위까지 수치모사를 수행하였다. 두 개의 압력 측정꼬 지 사이의 벽면 압력차에 대하여 압력 신호로 측정한 실험값을 수치모사결과와 비교하였다. 걷보기 전단속도가 매우 큰 1300s-1에 이르는 높은 유속의 전 실험범위에 대하여 안정된 수 치해를 얻을수 있었다. 3$0^{\circ}C$에서는 모든 실험범위의 유속에서 압력차에 대한 수치모사 결과 가 실험값과 잘일치했다. 21$^{\circ}C$에서는 0.1$\times$10-3m3/s보다 낮은 유속범위에서 실험값과 일치하 는 결과를 얻었으나 그보다 높은 유속에서 실험값과 일치하는 결과를 얻었으나 그보다 높은 유속에서 실험값과 다른 경향의 결과를 얻었다. 이것은 낮은 온도 높은 유속 조건에서 M1 유체의 성질이 불안정하고 또한 그러한 조건의 실험에서 발생한 압력 측정꼭지 부근의 기포 들이 정확한 압력측정에 영향을 끼쳤기 때문이다. 수치모사 결과로부터 얻은 압력과 응력분 포로부터 수렴관 유변측정기의 유동특성을 밝힐수 있었다. 이는 실험적 방법을 통해서는 얻 기 어려운 결과들로서 중요한의미를 가진다. 특별한 모양을 갖도록 설계된 수렴관을 통과하 는 M1 유체가 중심부근에서 일정한 신장변형속도로 변형됨을 확인할 수 있었으며 수직응력 은 지수적으로 증가하다가 축소부분을 지난 후 매우 장점도를 얻기 위하여 신장변형속도가 일정한 구역이 두 배로 확장된 수렴관이 수치적으로 다루어졌고 이를 통하여 기존의 수렴관 에서 구한 값보다 큰 신장점도를 얻을 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1150-1160
• /
• 1993

The behavior of polystyrene in the strip cavity during the packing and cooling stages for an injection molding process is examined numerically. The mathematical model is based on the unified post-filling model and finite element/finite difference methods are used to solve simultaneously the continuity, momentum and energy equations coupled to an equation of state. Simulated results show that the density of the molded parts is lower in the core than at the skin, and that the hotter the melt or the higher the packing pressure, the higher the density in the core. The density variation during the packing stage comes up to 50% compared with the total density variation. Also, the density variation after gate sealing and the effect of cooling rate on the equation of state are negligible.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.196-201
• /
• 1995

새로운 증착방법인 UHV-ECRCVD를 이용하여 기판온도 $440^{\circ}C$의 저온에서 격자이온이 일어나지 않고 완벽한 정합상태를 유지하고 있는 무전위 SiGe 에피박막을 성장시켰다. 박막의 두께는 기계적 평형이론(mechanical equilibrium theory)인 Mattews-Blakeslee 임계두께를 초과하였으며, 따라서 본 연구에서 사용하는 낮은 기판온도에 의해 격자이완이 억제되고 있음을 알았다. 한편 성장시에 가해주는 GeH4의 유량이 증가함에 따라 박막내에 GeH4으로부터 생성된 무거운 ion의 기판입사량이 증가하여 격자손상(lattice damage)에 의한 결함이 증가하므로 높은 Ge 함량을 갖는 무전위 SiGe 에피박막을 얻을 수 없었다. 그러나 전체압력을 증가시켜서 에피층을 성장시키면 격자손상에 의한 결함은 생성되지 않았으며, 따라서 전체압력을 증가시키면 높은 Gegkafid을 갖는 무전위 SiGe 에피박막을 성장시킬 수 있을 것이라고 생각된다. 이것은 전체압력 증가로 인해 ECR 플라즈마 안의 전자온도가 감소하여 성장을 주도하는 활성종(reactive species)이 ion에서 radical 로 바뀌기 때문이라고 추정하였다. 본 연구에서는 박막의 Ge 함량이 증가함에 따라 에피층의 성장속도가 증가하는 현상을 관찰하였다. 따라서 ECR 플라즈마를 사용하는 본 연구에서도 표면에서의 수소탈착이 성장속도결정단계임을 알 수 있었다. 한편 인입률(incorporation ratio)은 1에 근접하였으며, 이것은 플라즈마에 의한 원료기체의 분해과정이 thermal CVD와는 달리 무차별적으므로 SiH4과 GeH4의 분해효율이 크게 다르지 않기 때문이라고 추정하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.429-445
• /
• 2008

Two-phase compressible flow fields of air-water are investigated numerically in the fixed Eulerian grid framework. The phase interface is captured via volume fractions of each phase. A way to model two phase compressible flows as a single phase one is found based on an equivalent equation of states of Tait's type for a multiphase cell. The equivalent single phase field is discretized using the Roe‘s approximate Riemann solver. Two approaches are tried to suppress the pressure oscillation phenomena at the phase interface, a passive advection of volume fraction and a direct pressure relaxation with the compressible form of volume fraction equation. The direct pressure equalizing method suppresses pressure oscillation successfully and generates sharp discontinuities, transmitting and reflecting acoustic waves naturally at the phase interface. In discretizing the compressible form of volume fraction equation, phase interfaces are geometrically reconstructed to minimize the numerical diffusion of volume fraction and relevant variables. The motion of a projectile in a water-filled tube which is fired by the release of highly pressurized air is simulated presuming the flow field as a two dimensional one, and several design factors affecting the projectile movement are investigated.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.281-286
• /
• 2003

Blood Pressure is one of the most fundamental Parameters which reflects physical conditions medically and the blood pressure measurement system using oscillometric method is a Non-Invasive Blood Pressure measurement device by measuring arterial Pressure through a cuff. In this paper. we designed a inflatable wrist blood pressure system which measures blood Pressure during the stepping inflation in the wrist cuff. The hardware system consists of a main power unit, a bladder in cuff unit, signal detection units, signal Processing units. a wireless data transmission unit, and a data display unit. We evaluated the reliability of this system by comparing and analyzing systolic. diastolic blood Pressure, and heart rate with other commercial blood Pressure measurement devices. Characteristic ratio values used to determine systolic and diastolic blood Pressure using MAA(Maximum Amplitude Algorithm) were 0.436 and 0.671 respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1056-1062
• /
• 2008

The interaction between thrust plume and satellite base region was investigated by using direct simulate Monte-Carlo calculations. For the accurate simulation of N2 and H2 collisions and rotation-translation transition, a variable soft-sphere model and a recent rotational relaxation model of N2 and H2 were used. For the investigation of the interaction between thrust plume and base region, the number density distribution for each species, translational and rotational temperature distributions, heat flux, and pressure were examined by direct simulation of Monte-Carlo calculations. It was found that most of the surface properties are affected by H2 collisions and a strong non-equilibrium state is observed at the base region. It was demonstrated that an accurate model is needed to simulate H2 collisions and the rotation-translation transition. The results by the present calculation are more accurate than previous direct simulation Monte-Carlo calculations because more accurate rotational relaxation models were used in simulating the inelastic collisions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.599-608
• /
• 2012

A numerical analysis has been performed through implicit dynamic finite element analysis using the commercial package, ABAQUS in order to investigate effect of laser peening on welding residual stress mitigation of dissimilar metal welds in a safety injection nozzle of integral reactor. The implicit dynamic finite element analysis are compared with the previous experimental results. By comparison, it is identified that the implicit dynamic finite element analysis is valid for residual stress mitigation via laser peening. Implicit static finite element residual stress analysis has been performed for the dissimilar metal welds subject to inner repair welding. The analysis results represent that both axial and hoop residual stresses are tensile on inner surface of safety injection nozzle due to inner repair welding. Also Parametric study has performed to investigate effect of laser peening variables such as maximum impact pressure, duration time of pressure, spot diameter and peening direction on the welding residual stress mitigation. As a result, it is found that laser peening has the preventive maintenance effect to mitigate mainly residual stresses of region near inner surface.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.411-417
• /
• 2000

This paper describes the analysis of the oscillometric method based on the shape of arterial pressure and proposal of a new algorithm for estimating the blood pressure by computer simulation. In the first step, the arterial pressure model which is able to control the shape of arterial pressure was designed and then we simulated the oscillometric model using both the existing exponential model showing the static arterial pressure-volume relation and the designed arterial pressure model. By analyzing the correlation of characteristic ratio based on the shape of arterial pressure, we could find that the characteristic ratio was not the only standard parameter for estimating systolic and diastolic pressure. We were able to estimate the shape of arterial pressure by computing the correlation of arterial pressure shape with oscillation shape. Finally, we proposed an algorithm which is able to estimate systolic and diastolic pressure according to pressure(Pp) table constructed from the relation of maximum amplitude of oscillation and arterial pressure shape. We tested 60 arterial pressure waveforms having various arterial pressure shape and pulse. As a results, the absolute deviation average values of the estimation of systolic, diastolic and mean pressure were 1.62%, 2.40% and 2.20%, respectively. In conclusions, the proposed algorithm showed the possibility of usefullness in estimating the blood pressure.

• Clinical and Experimental Pediatrics
• /
• v.48 no.12
• /
• pp.1362-1369
• /
• 2005

Purpose : This study aimed to investigate the correlation between the plasma level of N-terminal pro-B-type natriuretic peptide(pro-BNP) and several known risk factors influencing outcomes after Fontan operations, and to assess whether pro-BNP levels can be used as predictive risk factors in Fontan operations. Methods : Plasma pro-BNP concentrations were measured in 35 patients with complex cardiac anomalies before catheterization. Cardiac catheterization was performed in all subjects. Mean right atrium pressure, mean pulmonary artery pressure(PAP), and ventricular end-diastolic pressure(EDP) were obtained. Cardiac output and pulmonary vascular resistance were calculated by Fick method. Results : Plasma pro-BNP levels exhibited statistically significant positive correlations with mean PAP(r=0.70, P<0.001), pulmonary vascular resistance(r=0.57, P<0.001), RVEDP(r=0.63, P<0.001), LVEDP(r=0.74, P<0.001), and cardiothoracic ratio(r=0.71, P<0.001). The area under the ROC curve using pro-BNP level to differentiate risk groups in Fontan operations was high : 0.868(95 percent CI, 0.712-1.023, P<0.01). The cutoff value of pro-BNP concentrations for the detection of risk groups in Fontan operations was determined to be 332.4 pg/mL(sensitivity 83.3 percent, specificity 82.7 percent). Conclusion : These data suggest that plasma pro-BNP levels may be used as a predictive risk factor in Fontan operations, and as a guide to determine the mode of therapy during follow-up after Fontan operations.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.61-68
• /
• 2012

Most widely methods for reinforcement of soil utilized in Korea are anchor method, soil nail method and micro pile method. These methods are classified by the intended use of the structure to be constructed, but the reinforcement of the ground is accomplished contains in common the process of grouting work after inserting the reinforcements. Domestically, gravity grouting has been used mostly so far, but there has always been the risk of insufficient restoration of the loose ground area from the drill holes because the grouting is conducted only by gravity. On the other hand, pressure reinjection grouting may enhance the grouting quality by solving the problem of the existing grouting method considerably since it additionally reinjects grouting through pre-installed tube a certain time after the first grouting. Accordingly, this study evaluated the pullout characteristics by the grouting methods by performing model test on decomposed granite soil, and investigated the support increasing characteristics of reinforcements depending on the curing time, reinjection pressure, and uplift force variation of the pressure reinjection grouting. The result of this research shows that the pressure reinjection grouting demonstrated 1.1~1.3 times of performance of the gravity grouting, and suggests some analysis on optimal water content, reinjection pressure and curing time of the pressure reinjection grouting.