• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.465-471
• /
• 2003

A coastwise chemical tanker sailing at full speed has capsized during turning in calm water. In the previous paper, we investigated the reasons of the accident by demonstrating the proper correction for the free surface effect of the liquid cargo and the bow-sinkage effect. In this paper, we also carry out model experiments of a transverse pressure under the seawater and an outward heel moment according to the heel angle and rudder angle, on the basis of radius of turning circle, ship's speed and drift angle of model ship occurring in turning. It is also shown that the flooding of seawater onto the deck occurring in turning generated a significant outward heel moment and increased the vertical distance between the center of gravity of the ship and the center of lateral water drag.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.735-743
• /
• 2011

In this study, the distribution of surface pressure was measured in a steady state on a turbine blade which was moved the injected region and receded the stagnation region using a linear cascade apparatus. Axial-type blades were used and the blade chord was 200mm. The rectangular nozzle was applied and its size was $200mm{\times}200mm$. The experiment was done at $3{\times}10^5$ of Reynolds number based on the chord. The surface pressures on the blade were measured at three different nozzle angles of $58^{\circ}$, $65^{\circ}$ and $72^{\circ}$ for off-design performance test. In addition, three different solidities of 1.25, 1.38 and 1.67 were applied. From the results, the low solidity caused the low pressure on the blade suction surface at entering region and the reverse rotating force was generated at the low nozzle angle. The positive incidence also made the pressure lower on the suction surface at entering region.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.49-55
• /
• 2003

In this study, based on the relationship of the vertical force - settlement of batter piles obtained by pressure chamber model tests, the vertical bearing capacity of vertical and batter piles according to the increase of pile inclination was analyzed. A model open - ended steel pipe pile with the inclination of 5$^\circ$, 10$^\circ$ and 15$^\circ$ was driven into saturated fine sand with relative density of 50 %, and the static compression load tests were performed under each confining pressure of 35, 70 and 120 kPa in pressure chamber. The vertical bearing capacity of pile obtained from pressure chamber tests increased with the pile inclination. In the case of the inclination of 5$^\circ$, 10$^\circ$, 15$^\circ$, increasing ratios of pile bearing capacity were 111, 121, 127 ~ 140 % of vertical bearing capacity respectively. In the case of the inclination of above 20$^\circ$, the model tests could not be performed because of pile of pile head during compressive loading on the pile head.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.68-76
• /
• 2016

This research is carried out for the performance evaluation of the injector that is one of the critical components of bipropellant-rocket-engine. Spray characteristics are investigated in detail according to the recess length and injection pressure on the swirl-coaxial-injector using gaseous methane and liquid oxygen as propellants. A visualization is conducted by the Schlieren photography that is composed of a light source, concave mirrors, knife, and high-speed-camera. A hollow-cone-shape is identified in the liquid spray that is spread only by inner injector and the spray angle is decreased due to the diminution of swirl strength in accordance with the increase of the length of injector orifice. When the injector sprays the liquid through the inner injector with the aid of gas through the outer injector, the spray angle in external mixing region tends to increase with rise of the recess length, while in internal mixing region, it is decreased. It is also confirmed that the same tendency of the spray angle with recess length appears irrespective of the injection pressure of liquid spray.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.761-770
• /
• 2007

In this study, a swirl generator using delta wing was developed in order to simulate total pressure distortion and flow angle distortion. The delta wing was used for $65^{\circ}$-degree sweep back angle to satisfy the design performance for vortex core position, total pressure distortion(DC90) and swirl angle. To extend the swirling flow area, a $45^{\circ}$-degree vortex flap have applied to the delta wing. The swirl generator satisfied the design requirement of distortion coefficient in the flow distortion test to be applied to the simulation duct, and the performances of distortion for vortex core position and swirl angle using CFD(computational fluid dynamics) analysis results that was verified by flow distortion test results.

• Proceedings of the Petrological Society of Korea Conference
• /
• 2002.05a
• /
• pp.1-38
• /
• 2002

옥천변성대 서남부지역은 변성이질암의 광물조합을 기준으로 남동부부터 북서방향으로 흑운모대, 석류석대, 십자석대의 3개의 변성광물분대로 나누어진다. Oh et al. (1995a)의 연구에서 보고된 남정석들은 산출되지 않는 것이 확인되었고 변성도는 흑운모대에서 석류석대를 거쳐 십자석대로 갈수록 증가한다. 쥬라기 화강암 접촉부의 국부적인 변성암류에서는 화강암에 의한 접촉변성작용에 의해 형성된 홍주석과 규선석이 산출된다. 흑운모대의 변성 압력-온도는 4.2 - 5.1 kb, 400 - 500 $^{\circ}C$이다. 십자석대의 정누대구조를 가지는 석류석과 석류석안의 사장석, 흑운모, 금흥석, 일메나이트포유광물의 공생관계로 추정한 압력-온도 (석류석 주변부: 7.0 - 8.0 kb, 550 - 620 $^{\circ}C$； 석류석 중심부: 4.0 - 5.0 kb, 420 - 520 $^{\circ}C$) 및 십자석대 내에서 후퇴변성작용 및 접촉변성작용 받은 석류석 주변부에 기록된 압력-온도 조건(약 2.0 - 3.0kb, 450 - 55$0^{\circ}C$)과 함께 옥천변성대 서남부지역의 변성암류가 시계방향의 압력-온도 경로를 겪었음을 지시한다. 연구지역 내에서 정밀 기재된 단면들에 대한 퇴적환경을 종합하면 대체 적으로 남동부에서는 천해성 환경이 인지되나 북서쪽으로 갈수록 대륙사면을 거쳐 분지 중심의 환경으로 전이되는 경향을 보인다. 이러한 퇴적상의 공간적 분포는 분지의 남동쪽보다 북서쪽의 침강이 우세하였던 것으로 해석될 수 있으며, 이는 곧 분지가 형성될 때 반지구대 (half graben) 형태로 분지가 열개 (rifting) 되었음을 의미한다. 각 변성분대에서 채취한 변성이질암으로부터 측정된 K-Ar 과 40Ar/39Ar 흑운모와 백운모 연대들은 149 - 167 Ma에 집중된다. 그리고 각 변성분대에서 동일시료에 대한 K-Ar 과 40Ar/39Ar 연대들은 동일시기를 지시함으로 연대적인 신뢰성을 확인 할 수 있었다. 옥천변성대 서남부지역의 변성암류를 관입하는 2개의 괴상의 화강암과 1개의 엽리화강암에서 얻어진 백운모와 흑운모들의 K-Ar 연대는 모두 156 Ma이며 옥천변성대 서남부지역의 변성이 질암의 연대와 유사하다. 이는 연구지역의 변성암류와 화강암류는 40Ar/39Ar 과 K-Ar 계의 흑운모와 백운모의 폐쇄온도 (약 300 - 350 $^{\circ}C$) 까지 동시에 냉각된 사실을 지시한다. 각섬석 편암내의 각섬석들은 복잡한 40Ar/39Ar 연대를 보여주며 일부가 평형연대를 보여주지만 특별한 의미 부여가 힘들다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.208-208
• /
• 2010

본 연구에서는 투명전도성산화막으로 적용 가능한 Ga이 도핑된 ZnO(GZO)의 성장 및 후처리 과정에 따른 구조적, 전기적, 광학적 특성을 관찰하였다. GZO 박막은 상온과 $200^{\circ}C$, 50~250 mTorr (50 mTorr 단계)에서 RF 마그네트론 스퍼터법으로 증착하였다. 이와 같은 조건에서 성장 된 박막의 특성을 분석하여 최적의 온도 및 작업압력에서 RF power를 변화시켜 박막을 성장한 후 질소 및 수소를 이용한 후처리 공정을 통하여 GZO 박막을 제작, 각 조건에 따른 구조적, 전기적 및 광학적 특성 변화를 조사하였다. XRD 측정에서, 열처리 전 시료에서는 GZO (002) 상의 Bragg-Angle 위치가 호스트 물질 ZnO의 기준위치보다 낮은 각도 쪽에서 나타났으며, 이는 Ga이 Zn와 치환되지 못하고 격자 내에 침입형태로 존재함에 따른 것으로 판단된다. 열처리 이후 전반적으로 분위기 가스의 종류에 관계없이 결정성, 광투과율 및 전기적 특성이 향상되는 것이 관측되었다. 질소 분위기에서 열처리된 GZO 박막의 경우, 전반적으로 박막 증착 시 초기 작업압력의 증가에 따라 비저항이 증가하는 현상이 관측되었다. 반면, 수소 분위기에서 열처리된 박막에서는 박막 증착 초기 작업 압력이 증가함에 따라 비저항이 감소하는 경향이 관측되었다. 이러한 결과는 XPS(X-Ray Photoelectron Spectroscopy)로 분석한 결과, 질소 분위기에서 열처리된 GZO 박막은 O-H 결합이 Zn-O 결합에 비해 과도하지 않은 반면, 수소화 처리된 GZO 박막에서 Zn-O 결합에 비해 과도한 O-H 결합이 존재하기 때문으로 관측되었다. 그러한 이유는 O-H 결합이 GZO 박막 내 산소 결공($V_o$)과 밀접한 관계가 있기 때문이며, O-H 결합의 증가는 $V_o$-H 결합체의 증가를 의미하기 때문이다.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.770-775
• /
• 1994

Kimchi packed in polypropylene(PP) tray was stored at different temperatures (0, 10, $20^{\circ}C$) to investigate the relationships between fermentative gas pressure and quality changes. The quality of Kimchi during storage was evaluated in terms of pH, titratable acidity, color, and sensory properties. The fermentative gas pressure changes due to $CO_2$ evolution showed typical sigmoidal curves at each temperature. Accordingly, inflation of Kimchi packages caused by increasing gas pressure occurred in 40 hours, 5 and 30 days at 20, 10, $0^{\circ}C$ , respectively, at which gas pressure inside the packages ranged $1.2{\sim}1.4\;psig$. Following inflation, Kimchi packages stored at 20 and $10^{\circ}C$ were burst out on 3 and 8 days, but those at $0^{\circ}C$ were not. As the fermentative gas pressure increased, pH decreased (r > 0.968) and titratable acidity increased (r > 0.973) proportionally. Regarding to the color change of crushed Kimchi juice, L and b values were decreased exponentially, but a value remained constant during storage. Among sensory properties, the sourness and texture scores showed good accordance with pH changes. In conclusion, although Kimchi kept optimal tastes during storage, the inflation of package restricted shelf-life of Kimchi.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.337-348
• /
• 2003

The propagation mechanism of a detonation pressure with fully coupled charge is clarified and the blasting pressure propagated in rock mass is derived from the application of shock wave theory. The blasting pressure was a function of detonation velocity, isentropic exponent, explosive density, Hugoniot parameters, and rock density. Probabilistic distribution is obtained by using explosion tests on emulsion and rock property tests on granite in Seoul and then the probabilistic distribution of the blasting pressure is derived from the above mentioned properties. The probabilistic distributions of explosive properties and rock properties show a normal distribution so that the blasting pressure propagated in rock can be also regarded as a normal distribution. Parametric analysis was performed to pinpoint the most influential parameter that affects the blasting pressure and it was found that the detonation velocity is the most sensitive parameter. Moreover, uncertainty analysis was performed to figure out the effect of each parameter uncertainty on the uncertainty of blasting pressure. Its result showed that uncertainty of natural rock properties constitutes the main portion of blasting pressure uncertainty rather than that of explosive properties. In other words, since rock property uncertainty is much larger than detonation velocity uncertainty the blasting pressure uncertainty is more influenced by the former than by the latter even though the detonation velocity is found to be the most influencing parameter on the blasting pressure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.35-43
• /
• 2019

In this study, a guide vane with varying positions and incidence angles was adopted to a pin-fin channel to analyze the change in thermal performance and pressure loss characteristics. A numerical analysis was conducted to investigate the effect of incidence angles and positions on heat transfer and flow characteristics at Re =1400. The results of it were compared those of a pin-fin channel without a guide vane. In case 1 when the incidence angle is $0^{\circ}$, the heat transfer performance is maximized and improved by approximately 5% when compared to the pin-fin channel without the guide vane. In case 2 when the incidence angle is $10^{\circ}$, the pressure loss is minimized and decreased by approximately 1.9% when compared to the pin-fin channel without the guide vane.