• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.64-71
• /
• 2024

The external fuel tank of an aircraft is a main component that can increase the cruising range of the aircraft. It must be able to be stably separated from the pylon in an emergency situation. At this time, a separation load is applied to the fin and the pivot of the external fuel tank. To stably separate the external fuel tank, the structural soundness of the fin and the pivot must be confirmed. In this study, structural tests were conducted to verify the structural integrity of the external fuel tank pin and pivot when the external fuel tank was separated from the aircraft. Results are then presented. In this paper, a test configuration diagram consisting of the hydraulic and load control equipment, data acquisition system, and pneumatic supply unit used in the structural test was explained. Test installation and test load application plan for each test condition were provided. As results of the structural test, it was found that test load and internal pressure of the test specimen were properly controlled within the allowable range in each test. It was confirmed that serious structural defects in the test specimen did not occur under required load conditions. In conclusion, through structural test for design limit load and design ultimate load, it was proven that the fin and pivot of the external fuel tank for aircraft covered in this study had sufficient structural strength.

• Journal of The Korean Association For Science Education
• /
• v.29 no.8
• /
• pp.978-989
• /
• 2009

In this study, we investigated high school students' errors in constructing and interpreting graph on experimental results by students' science achievement level. Two tests regarding constructing and interpreting graph about 'the relationship between the pressure and volume of a gas' were administered to 11th-graders (N=140). Analysis of the results revealed that most students exhibited many errors in the processes of constructing and interpreting graph. In the processes of constructing graph, there were 16 types of errors on the categories of 'misinterpreting the variables', 'mis-marking the graphical elements', and 'misusing the data'. The students of lower achievement level had more errors than those of higher achievement level in the four error types, that is, 'missing the variables', 'representing the best fit line using a broken line', 'adding the data', and 'neglecting the data'. However, the results were reversed in the error type of 'not marking the origin.' In the processes of interpreting graph, there were 9 types of errors on 'misreading the data', 'wrong interpolation and extrapolation', and 'establishing the wrong relationship'. The students of lower achievement level had more errors than those in the higher achievement level in the error types of 'wrong interpolation' and 'misdescribing the relationship between variables'. Educational implications of the findings are discussed.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.4
• /
• pp.1-17
• /
• 2023

This study examines the entrepreneurial experiences of unmarried mothers living in a community who have succeeded in starting a business. Attention was given to the maternal and labor rights of five single mothers in a community who gave birth, raised children, and engaged in vocational activities. Data were collected through one-on-one in-depth discussions with the participants and analyzed using Colaizzi's descriptive-phenomenological method. The data analysis revealed 53 themes and 10 clusters of themes. Based on these results, items such as overcoming pregnancy conflict, reasons for starting a business, and successful entrepreneurial experience were identified and described. The key themes of this study include "Pressure to live", "Hold oneself responsible for an unblessed life", "Stigma and deprivation of opportunity", "Maintaining basic life amid anxiety", "Starting from ground zero", "Work and parenting tug-of-war", "Let's rely on my ability rather than external support", "Securing credit capital", "Philosophy for shared growth" and "Infinite possibilities at the edge of a cliff". In the attempt to start a business using positive psychological capital for the well-being of themselves and their children's, the mothers uncovered social capital, which led to mutual growth. Based on the research results, the ethics and resilience of shared growth were discussed.

• Food Science and Preservation
• /
• v.30 no.3
• /
• pp.472-482
• /
• 2023

This study used gas chromatography combined with the microelectron capture detection method to determine the most effective washing and cooking methods for removing isoprothiolane from rice. The initial isoprothiolane concentrations in brown and polished rice, before washing, were 17.03 mg/kg and 1.67 mg/kg, respectively. Residual concentrations declined with more washing cycles (19.3-59.3% for brown rice; 43.1-66.5% for polished rice); and by increasing the temperature of the washing water from 5℃ to 40℃ (56.6-63.1% for brown rice; 67.1-74.9% for polished rice). Hand-washing samples using gentle stirring or harsh rubbing reduced pesticide concentrations by 63.1-71.6% for brown rice, versus 75.4-87.4% for polished rice. Reduction in isoprothiolane concentrations varied based on the rice cooker type and whether the rice was pre-soaked. Immediate cooking using an electric- or pressure-cooker showed 78.5% and 78.4% reduction in brown rice, compared with 94.0% and 94.0% for polished rice, respectively. Pre-cooking immersion for 30 min showed similar reductions of 83.4% and 83.4% in brown rice, versus 95.8% and 95.8% in polished rice. The results of this study suggest that the most effective method for removing residual isoprothiolane from both brown rice and polished rice was to wash six times (with vigorous rubbing during the 2nd and 3rd washing) in 7-fold water at 40℃, followed by immersion for 30 min before cooking. Regardless of the type of rice cooker, heating is sufficient to remove an average of 83.4% and 95.8% of isoprothiolane from brown rice and polished rice, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.95-102
• /
• 2024

Due to technological advances, the cruising speed of high-speed trains is increasing, and aerodynamic noise generated from the flow outside the train has been an important consideration in the design stage. To accurately predict the flow-induced noise, high-resolution generation of sound sources in the near field and low-dissipation of sound propagation in the far field are required. This should be accompanied by a numerical grid and time resolution that can properly consider both temporal and spatial scales for each component of the real high-speed train. To overcome these challenges, this research simultaneously calculates the external flow and acoustic fields of five high-speed train cars of real-scale and at operational running speeds using a threedimensional unsteady Large Eddy Simulation technique. To verify the numerical analysis, the measurements of the wall pressure fluctuation and numerical results are compared. The Ffowcs Williams and Hawking equation is used to predict the acoustic power radiated from the high-speed train. This research is expected to contribute to noise reduction based on the analysis of the aerodynamic noise generation mechanism of high-speed trains.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.62-77
• /
• 2024

In the maritime shipping industry, imbalance between supply and demand has persistently increased, leading to the utilization of blank sailings by major shipping companies worldwide as a key means of flexibly adjusting vessel capacity in response to shipping market conditions. Traditionally, blank sailings have been frequently implemented around the Chinese New Year period. However, due to unique circumstances such as the global pandemic starting in 2020 and trade tensions between the United States and China, shipping companies have recently conducted larger-scale blank sailings compared to the past. As blank sailings directly impact freight transport delays, they can have negative repercussions from perspectives of both businesses and consumers. Therefore, this study employed Poisson regression models and negative binomial regression models to analyze the influence of maritime freight rate determinants on shipping companies' decisions regarding blank sailings, aiming to proactively address potential consequences. Results of the analysis indicated that, in Poisson regression analysis for 2M, significant variables included global container shipping volume, container vessel capacity, container ship scrapping volume, container ship newbuilding index, and OECD inflation. In negative binomial regression analysis, ocean alliance showed significance with global container shipping volume and container ship order volume, the alliance with container ship capacity and interest rates, non-alliance with international oil prices, global supply chain pressure index, container ship capacity, OECD inflation, and total alliance with container ship capacity and interest rates.

• Korean Chemical Engineering Research
• /
• v.62 no.3
• /
• pp.214-224
• /
• 2024

Valves play an essential role in a chemical plant such as regulating fluid flow and pressure. Therefore, optimal selection of the valve size and type is essential task. Valve size and type have been selected based on theoretical formulas about calculating valve sizing coefficient (Cv). However, this approach has limitations such as requiring expert knowledge and consuming substantial time and costs. Herein, this study developed a model for predicting valve sizes and types using machine learning. We developed models using four algorithms: ANN, Random Forest, XGBoost, and Catboost and model performances were evaluated using NRMSE & R² score for size prediction and F1 score for type prediction. Additionally, a case study was conducted to explore the impact of phases on valve selection, using four datasets: total fluids, liquids, gases, and steam. As a result of the study, for valve size prediction, total fluid, liquid, and gas dataset demonstrated the best performance with Catboost (Based on R², total: 0.99216, liquid: 0.98602, gas: 0.99300. Based on NRMSE, total: 0.04072, liquid: 0.04886, gas: 0.03619) and steam dataset showed the best performance with RandomForest (R²: 0.99028, NRMSE: 0.03493). For valve type prediction, Catboost outperformed all datasets with the highest F1 scores (total: 0.95766, liquids: 0.96264, gases: 0.95770, steam: 1.0000). In Engineering Procurement Construction industry, the proposed fluid-specific machine learning-based model is expected to guide the selection of suitable valves based on given process conditions and facilitate faster decision-making.

• Journal of Korea Water Resources Association
• /
• v.57 no.8
• /
• pp.549-559
• /
• 2024

This study aims to investigate the feasibility of using image analysis methods to examine the flow characteristics of air bubbles discharged underwater. A bubble screen was created using multiple nozzles in a laboratory flume filled with stagnant water. The flow characteristics of the bubbles were analyzed, and the suitability of the analysis method was evaluated. Several parameters, such as projection area ratio and depth ratio, were defined to conduct laboratory experiments and analyze the flow characteristics of the bubbles. Correlation and regression analyses were performed to assess the relationships between various variables. Specifically, the correlation between the bubble's projection area and its rising speed across eight water depth ratios was examined. The results indicated that as the depth ratio increased, the bubble size exhibited a linear increase with a strong correlation as it rose to the water surface due to pressure effects. Regarding the sensitivity of different grid sizes in the ten analysis grids when applying image analysis methods, it was observed that the sensitivity to grid size based on the projection area ratio (0.09~0.96) was not significant. These findings suggest that image analysis techniques can be effectively utilized to observe the flow characteristics of bubbles.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.175-184
• /
• 2000

A lab-scale MF membrane reactor was installed to investigate the membrane permeability, characteristics of membrane fouling at each conditions, and quality of permeate (liquid livestock manure) in the separation of solid-matters using membrane. Experiment was divided three filtration type such as follows; continuous filtration, gravity filtration, and intermittent filtration. As a result of experiment, flux 1 LMH was maintained for 7days, and trans-membrane pressure(TMP) was increased gradually under 10cmHg, but it was increased immediately after 10cmHg, respectively. However, the flux was increased, the Tmax was decreased exponential more and more. During the pure-flux test, most of the fouling of membrane was reversible. At the gravity filtration, permeate could be obtained as 1.75 LMH for 3.5days without any other electronic pressure. As an investigation of membrane surface, this study could be decided that the reason of fouling at the lower flux (Run 1 and 2) was attached matters in membrane surface, but at the higher flux (Run 4-6) was concentration polarization.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.3
• /
• pp.295-298
• /
• 2005

We report a case of a 48-year-old man with a paradoxic upper airway obstruction and central sleep apnea that developed after an anterior cervical spinal fusion. Nine months before being admitted to this hospital, he was diagnosed with a herniated intervertebral disc between the 5th and 6th cervical spine, and the first operation was carried out. Two months later, a pseudoarthrosis has developed and a second operation, an anterior interbody fusion of the C5 and C6 using autogenous strut bone graft, was performed. After the second operation, he began to complain of snoring, excessive daytime sleepiness, insomnia, and a bizarre sound heard near the upper airway during breathing. Nasopharyngoscope and magnetic resonance imaging disclosed a paradoxical narrowing of the nasopharynx during expiration. On the overnight polysomnography, the apnea index was 8.7/h (central apnea, 7.0/h; obstructive apnea, 1.7/h). Nasal continuous positive airway pressure was applied, but he complained of pressure-intolerance, and laser-assisted uvulopalatoplasty was then performed. Two months after surgery, clinical symptoms as well as the apneas had improved markedly. We suggest that this paradoxic upper airway obstruction might be associated with the anterior cervical spinal surgery even though the mechanism is unclear. This case also emphasizes that an upper airway obstruction can contribute to the development of central sleep apnea.