• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.350-360
• /
• 2008

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity is widely used in determination of rock quality in support pattern design of road and railway tunnel construction sites. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test in laboratory, such as P wave velocity, Young's modulus, uniaxial compressive strength (UCS) and electrical resistivity. We correlate each test results and we found out that electrical resistivity has highly related to P wave velocity, Young's modulus and UCS. Next, we accomplished electrical resistivity survey in field site and carried out electrical resistivity logging at in-situ area. We also performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to RMR data. We found out that electrical resistivity logging data are highly correlate to RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RMR.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.13-30
• /
• 2012

Phlogopite and kaersutite, showing distinctively different textural characteristics compared to the common phenocrysts, are observed in alkali basalt from Jeju Island. They occur as large crystals (2-10 mm) in host basalts, whereas fine-grained phlogopite and kaersutite occur in ultramafic mantle xenoliths and mafic gabbroic xenoliths, respectively, as an interstitial and microvein phases, or in corona textures (<1 mm). This textural characteristics of fine-grained grains clearly indicates secondary in origin. Phlogopite contains high $TiO_2$(4.1-6.9 wt%) and F(2.8-4.6 wt%) and relatively high mg#[=100Mg/(Mg+$Fe^t$) in mols, where $Fe^t$ is total iron](88-80), whereas kaersutite has high $TiO_2$(5.6-6.11 wt%) and much lower mg#s(68-64). Our textural observations and the geochemical character of these hydrous minerals suggest that they were unrelated to each other and mica formation happened early in the upper mantle before the mantle xenoliths had been trapped. In contrast, kaersutite formation has happened later, probably during the late stage of crystallization as intracrustal processes. The presence of phlogopite and kaersutitic amphibole is a direct evidence for K-, Ti-, F- and $H_2O$-bearing fluid/melt percolation in the lithosphere beneath Jeju Island, indicating that they are product of interaction between host rock/peridotite/fluid-melt. Thus, the upper mantle/lower crust beneath Jeju Island are metasomatized to various extents, characterized by a change in major metasomatic hydrous minerals from phlogopite to amphibole with decreasing depth.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.3
• /
• pp.181-197
• /
• 2010

This study is for finding a geoscientific factor for clarifying the source soil of the ancient earthenware finding. The used samples were the earthenware, soil and rocks, which were collected at the Gyeongju, Gyeongsan and Haman area. The chemical and mineralogical study for the samples were carried out for understanding the change of mineralogical and chemical composition among them. The mineralogical compositions of the earthenware are different from those of the soils from the surrounding area, which suggests that the mineralogical approach for clarifying the source soil of the earthenware should be difficult. Major element compositions of the earthenware also are different from those of the surrounding soils, which suggests that the comparison of the chemical composition using the major elements might be difficult for deducing the source soil of the earthenware. However, PAAS-normalized rare earth element (REE) patterns and Nd model ages among the rock, soils and earthenware from the same sampling sites show similar characteristics one another compared to those of the major element compositions. Nd-Sr isotopic systematics among the earthenware, soils and rocks also show a close relationship. Our results suggest that REE and Nd-Sr isotope geochemistry might be more useful than the other geochemical technique in clarifying the source soils of the ancient earthenware.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.409-419
• /
• 2016

The number of volcanoes erupted during the past ten thousand years(Holocene period) on this planet is known to stand around 1,520. Of those volcanoes, the number of active volcanoes during the six-years and seven-month period(January 2010 through the end of July 2016) is totals 209. These findings show that an average of approximate 90 volcanoes erupted every year since 2010. It is also found that over 90 percent of those active volcanoes took place in the circum-Pacific volcanic belt, which is commonly called 'Ring of Fire'. This status coincides with the distribution maps of active volcanoes on the earth: about 80 percent on subduction zone of the convergence of lithospheric plate; 15 percent on spreading zone; 5 percent on intra-plate zone. The period given in this research during 350 weeks, the following three volcanoes showed a frequency of more than 300 times eruption: Kilauea(Hawaii, USA, 338 times), Sheveluch(Kamchatka, Russia, 337 times), and Aira(Kyushu, Japan, 301 times). According to the survey conducted during the given period, there is no conspicuous increase in the frequency of volcano activities. It rather shows that volcanic eruptions took place almost evenly every year.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.359-365
• /
• 2007

Freezing and thawing cycle is one of the major weathering-induced factors in the mechanical weathering of the rock mass. This natural process accelerates rock weathering process by breaking down the parent rock materials and makes soil or weathered rock formation in a rock slope surface zone. It can also cause reduction of the shear strength in slopes. It is important to calculate the deterioration depth caused by freezing-thawing for a slope stability analysis. In this study, deterioration depths of rock slope due to freezing-thawing were calculated using the 1-D heat conductivity equation. The temperature distribution analysis was also carried out using collected temperature distribution data for last five years of several major cities in Korea. The analysis was performed based on the distributed rock types in study areas. Thermal conductivities, specific heats and densities of the calculation rocks are tested in the laboratory. They are thermal properties of rocks as input parameters for calculating deterioration depths. Finally, the paper is showing the calculated deterioration depths of each rock type slopes in several major cities of Korea.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.95-106
• /
• 2023

Quartz (SiO₂) is among the major rock-forming minerals in the earth's crust. The atomistic structures of SiO₂ may evolve during diverse frictional processes. The reduction of friction of quartz-rock accompanied by its amorphization, hydration, and formation of silica gel provides mineralogical insights into earthquakes and related phenomena. Ball milling, together with rotary shear experiments have been useful to infer the atomic origins of such processes. In this study, optimal experimental conditions for ball milling for amorphization of SiO₂ were determined by taking into account various process variables. The crystallinity of SiO₂ gradually decreased and became amorphous as the ball milling time increased at a high milling speed. The degree of wear of the milling media and its effect on the amorphization of SiO₂ were analyzed using distinct milling materials (zirconia, stainless steel). The amount of ball wear increased with increasing milling time. Furthermore, the worn stainless steel particles from balls tend to interact with amorphized SiO₂ to form Si-O-Cr. These results aid in understanding the process of atomistic structural changes caused by ball milling of divserse materials with relatively high hardness, such as SiO₂, and understanding various geological friction processes.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.307-324
• /
• 2020

Major and trace elements, and Sr, Nd, isotopic composition analysis have been carried out on the Miocene basalt (Huangsongpu basalt, 20 Ma) 25 km to northeast from the Mt. Baekdu. The basalt has Na2O+K2O=3.5~4.7 wt.%, and MgO=9.9~11.1 wt.%, containing Mg-rich olivine (Mg#=75~86), clinopyroxene (Mg#=72~85) and Ca-rich plagioclase micro-phenocrysts. These data suggest that the basalt belongs to the alkaline magma series with a primitive nature, crystallized at a near-liquidus. The basalt is also characterized by high Cr (394~479 ppm) and Ni (389~519 ppm) contents, Nb-Ta enrichment anomalies and OIB-like trace elements patterns, displaying identical signatures to those of typical intraplate magmas. The rare earth element (REE) patterns of the basalt and high (Gd/Yb)sample/(Gd/Yb)PM ratio (=2.8~3.5) suggest the parental magma was derived from relatively low-degree (3~5%) partial melting of garnet peridotite. The 143Nd/144Nd and 87Sr/86Sr composition of the basalt are higher than those of BSE. The high 87Sr/86Sr (= ~0.7058) ratio of the basalt indicates a contribution of recycled ancient oceanic crust or continental crust on the Pacific slab suggesting that the Huangsongpu basalt was generated from metasomatized mantle.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.226-227
• /
• 2004

본 연구에서는 원자력 연구소 내에 건설할 고준위 폐기물 지하처분연구시설 부지에 관한 특성을 파악하고, 연구시설의 위치를 선정하기 위한 지질학적 연구를 실시하였다. 지표지질조사를 통하여 연구소 내에 분포하는 암석들의 분류와 선구조 분석을 실시하였고, 지구물리탐사와 시추조사를 통한 지하 암반의 분포양상과 연구시설 주변의 추정되는 파쇄대의 분포를 확인하였다. 지표지질조사결과 복운모화강암과 화강섬록암질 편마암이 점이적인 관계로 분포하고 있으며 (Fig.1, 3), 이들 화강암류 내에는 암맥상으로 중성 혹은 염기성 암맥들이 절리의 방향과 동일하게 관입 분포한다. 절리의 방향성은 N30E, N80W, NS방향으로 분포하고 있다(Fig. 2).(중략)

• Proceedings of the KSEE Conference
• /
• 2004.08a
• /
• pp.49-75
• /
• 2004

소음진동 규제법의 강화, 각종 건설민원 발생 및 안전강화 관리 차원에서 현재 국내 터파기 현장 및 각종 토공사에서 종래 시행되어지던 발파공법만으로 시행하는 것은 곤란하다. 건설교통부 설계 지침에서도 진동 규제치의 차이를 두어 파쇄와 발파와의 차이를 확연히 구분하는 실정이다. 기존에 발파는 그 경험이 많아 효과적인 방법 등이 널리 알려져 있지만 파쇄의 경우는 그 시공사례가 많지 않아 그 연구의 필요성이 대두되고 있다. 본 연구는 건교부에서 제시한 암파쇄굴착공법에 사용되어지는 미진동 파쇄기에 대한 연구로써 연암, 보통암, 경암지역에서의 전색제, 적정 패턴, 진동 특성 등을 분석하는데 그 목적이 있다. 시험은 크게 1, 2 타입으로 구분하여 실시하였으며 1타입의 경우는 천공장이 1.5m(180g 장약)이고, 2타입의 경우는 2.5m(360g)이다. 두 패턴을 기본으로 저항선, 공간격을 달리하여 시험을 진행하면서 그에 따르는 진동 및 파쇄정도의 차이를 관찰할 수 있었으며 암석 강도별 예상 진동식을 제안하였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.583-586
• /
• 2003

부산 동래지역 지열수에 대한 지화학적 진화과정을 밝히기 위하여 지열수, 지하수 및 해수에 대한 수리화학 특성과 이들의 연관성을 고찰하였다. 또한 심부환경에서의 지화학 특성을 규명하기 위하여 각종 이온지질온도계와 다성분 지질온도계를 적용하였으며, 동위원소특성과 함께 지화학 모델링을 통하여 심부환경에서의 온천수의 지화학특성을 밝히고자 하였다. 동래 지열수의 수리화학적 특성은 해수의 영향을 받아 높은 이온함량을 보이며 Na-Cl형을 보여준다. 지열수는 주변 지하수와의 크게 혼합된 양상을 나타낸다. 지화학 모델링에 따르면 지열수는 심부에서 약 5% 영향을 받은 것으로 추정된다. 즉, 심부로 순환하는 지열수가 해수와 혼합되며, 이들이 지열에 의해 가열되면서 광물의 용해 및 침전, 이온 교환반응 등 물-암석 반응을 거치면서 심부지열수를 형성하였으며, 지열수가 천부환경으로 상승하는 과정에서 동래지역 주변 천부지하수와 다양하게 혼합되면서 현재 동래온천수의 화학조성을 갖는 온천수를 형성하는 것으로 지열수의 진화 과정을 설명할 수 있다.