• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.17-30
• /
• 2002

삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대($\pm$15m) - 백운암대($\pm$15m) - 암회색대($\pm$50m)로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO 53.4~55.6%, 백운암대 : MgO 3.0~l8.4%, 암회색대 : CaO 50.4~54.2%로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.1
• /
• pp.25-33
• /
• 1992

The southwestern part of Gyeonggi Massif consists mainly of Archean Seosan and Daesan Groups, and Paleoproterozic Bucheon Group with Bucheon and Seosan gneiss complexes which are members of Gyeonggi gneiss complex. In the eastern part of Dangjin fault, Mesoproterozoic Anyang Group and Anyang granite gneiss occur, and in the western part of the fault Taean Group uncomformably overlies Archean and Paleoproterozoic Groups. Metamorphic facies of Archean Groups is mainly upper amphibolite facies which was overprinted by the second amphibolite facies metamorphism and the third greenschist facies metamorphism. Bucheon and Anyang Groups belong to amphibolite and greenschist facies and are partly overprinted by greenschist facies metamorphism which is characteristic for Taean and Daedong Groups.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2003

Seeds treated before sowing should be dried for their quality control on their sale or storage. The experiments were done to clarify the effect of drying, temperature and light quality treated during drying and germination on germination of gourd (Lagenaria siceraria Standl.) seeds. Drying of treated seeds was done at $35^{\circ}C$. After treated seeds were dried. their germination test was done at 10, 20 and $30^{\circ}C$ on the condition of darkness, but with blue, red, far-red light and darkness as light quality treatments. FR-yongjadaemok and FR-kunghap were used as test cultivars and their daily germination rates were measured at treatment levels. Its presowing hydrated seeds were dried 10 hours at $35^{\circ}C$ until reached below their original moisture content, and germination rate between the above dried seeds and the conventional dry-heated ones was not significantly different. At $30^{\circ}C$ germination temperature, the treated seeds showed higher initial germination rate when dried under red light illumination than under darkness although their germination rates were nearly same at each temperature of 10 and $20^{\circ}C$ being relatively low. Effect of the red light treatment during their drying continued to more than 3 months. Germination rate of the red light treated seeds during drying was reduced by far-red light treated during their germination. The initial rate to the second day after sowing were higher under red light and darkness treated during germination than under the two other lights.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.131-140
• /
• 2020

In training a classification model using machine learning, the acquisition of training data is a very important stage, because the amount and quality of the training data greatly influence the model performance. However, when the cost of obtaining data is so high that it is difficult to build ideal training data, the number of samples for each class may be acquired very differently, and a serious data-imbalance problem can occur. If such a problem occurs in the training data, all classes are not trained equally, and classes containing relatively few data will have significantly lower recall values. Additionally, the reliability of evaluation indices such as accuracy and precision will be reduced. Therefore, this study sought to overcome the problem of data imbalance in two stages. First, we introduced weighted accuracy and weighted precision as new evaluation indices that can take into account a data-imbalance ratio by modifying conventional measures of accuracy and precision. Next, oversampling was performed to balance weighted precision and recall among classes. We verified the algorithm by applying it to the problem of facies classification. As a result, the imbalance between majority and minority classes was greatly mitigated, and the boundaries between classes could be more clearly identified.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.349-360
• /
• 2016

The Bunam Stock ($29.5km^2$ area) is an outcrop of plutonic complex classified four facies: coarse-grained granite, quartz monzodiorite, granodiorite and fine-grained granite. Three facies except the last one exhibit very irregular boundaries with gradational compositional variations between both facies and show concentric zoning from the central quartz monzodiorite through granodiorite to outer coarse-grained granite. Mafic microgranular enclaves (MME) commonly occur in granodiorite. Some MMEs, have very fine-grained chilled margins and indentedly crenulate contacts, and display horizontally circular and vertically elongate shapes. Their shape and granularity indicate coeval flow and mingling of partly crystalline felsic and mafic magmas. MMEs exhibit dark fine-grained margins giving them a ellipsoidal form that has been attributed to undercooling of a mafic magma as blobs intruded into a felsic magma. The observed relations in the Bunam Stock identify that two endmembers are coarse-grained granite from a felsic magma and quartz monzodiorite from a mafic magma, and hybrid is granodiorite including MMEs. So they exhibit concentric zoning that lays the center on the mafic endmember due to magma mixing at the contacts of two magmas, when mafic magma injected into felsic magma. Thus the quartz monzodiorite may probably represent an ancient conduit of mafic magma transport through a granitic magma chamber. Mafic magma would rise through the conduit in which favorable conditions for magma mixing occurred. All these features suggest that they formed from mixing processes of calc-alkaline magma in the Bunam Stock.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.455-469
• /
• 2007

The study area, Bonggil-ri, Gyeongju, SE Korea, is composed of Cretaceous sedimentary rocks, and Tertiary igneous rocks and dykes. A research on fracture developing history and density distribution was carried out on well exposed Tertiary granites. The fractures developed in this area have the following sequence; NW-SE trending duo-tile shear bands (set a), NNW-SSE trending extensional fractures (set d), WNW-ESE trending extensional or normal fractures (set b), NE-SW trending right-lateral fractures (set c), WNW-ESE trending reverse fault reactivated from normal faults (set e) and NW-SE trending left-lateral faults reactivated from shear bands (set a) under brittle condition. According to the result of fracture density analysis, the fracture density in this area depends on rock property rather than rock age, and also higher fracture density is observed around fault damage zones. However, this high fracture density may also be related to the cooling process associated with dyke intrusion as well as rock types and fault movement. Regardless of the reason of the high fracture density, high fracture density itself contributes to fluid flow and migration of chemical elements.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2016

This study reports the results about the petrography of volcanic rocks in Namoo island and Namhyeongje island, off the southern coast of Busan City. The rocks in the Namhyeongje island composed of dacitic crystal-vitric welded tuff, showing phenocrysts of plagioclase, rock fragment with flow structure of elongated and flattened pumice fragments. In thin section it shows pyroclastic texture. The volcanic rocks in Namoo island are mainly dark grey-bluish dacite with phenocrysts of plagioclase and gradually changed to pink-greyish rhyodacite with auto-brecciated. In the northeastern part of the island, the volcanic rocks occurred as aggromerate with a poorly sorted mixture of blocks, lappili and ash and felsic feeder dike intrude the aggromerate. Major element composition of the volcanic rocks in Namhyeongje island and Namoo island are $SiO_2$ 73.6~74.4 wt.% and 65.5~68.3 wt.%, respectively. The volcanic rocks in these island are felsic volcanic rocks.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.365-383
• /
• 2004

Granitic rocks in the southeastern Gyeongsang Basin can be classified into three groups. The group I contains various mafic microgranular enclave (MME) and/or mafic clot which implies magma mixing or mingling. The group II show the feature of shallow depth emplacement at low pressure, and the group III is characterized by A-type granite implying extensional tectonic environment. Mineralogical characteristics of the granitic rocks have showed systematic variations in perthite exsolution temperatures and biotite compositions according to their rock facies, although they do not show any distinctively different trend in geography and textures or rock facies. Amphiboles from Group I are calcic-amphibole and they were formed at 0.4 ～ 2.8 kb in pressure based on the amphibole geobarometry. Amphiboles from group ill are riebeckite, whileas amphiboles were not observed in Group II. The chemical composition of biotite defined in clusters showing a continuous spectrum between group I to ferric-annite of group ill. The composition of plagioclase generally plotted in albite, oligoclase, and andesine area without any distinctive differences among their geography or rock facies. The exsolution temperatures by perthite geothermometry are calculated as $300～400^{\circ}C$ in Group I, and 500～$600^{\circ}C$ in equigranular granite of group II and alkali-feldspar granite of group III.

• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.575-592
• /
• 2018

This study investigates the formation mechanism of columnar joints at the Sanin Kaigan Geopark in Japan based on its morphology, rock type and igneous structure. Columnar joints distribute to five areas of three prefectures. That is, Kyogasaki, Byobuiwa, Tateiwa and Kyugenkado in Kyotango area of Kyoto prefecture; Genbudo and Kinumaki Shrine in Toyooka City of Hyogo prefecture; Yoroinosode, Takanosushima, Mini-Yoroinosode in Kamicho Town of Hyogo prefecture; Miooshima and Nagasakihana, Shitaara Domon, Kuzakuishi, Moroyose dyke in Shinonsencho Town of Hyogo prefecture; Shirawara dyke in Iwamicho Town in Tottori prefecture. Igneous structures are divided into three types: lava flow, sill and dyke. Lithologies are divided into five types including basalt, andesite, dacite, rhyolite, and quartz porphyry. Lava flow shows colonnade and entablature. However, entablature is not seen in the sills and dykes in the area. Although the polygons of columnar joint vary from tetragon to octagon, hexagon is most frequently found. The width of colonnades ranges from 10cm to 1m, but their size does not correlate with its $SiO_2$ contents. Meanwhile, their size and morphology at single site are comparatively uniform.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.218-221
• /
• 2001

양양 양수발전소 건설 지역 터널 내에서 동일 암상 내에 부존하는 단열 암반 대수층 지하수를 수평/수직적 관점에서 체계적으로 채취하고 수리지구화학 및 환경동위원소 특성 연구를 수행하고 있다. 현재까지 모아진 특성 자료를 공간적 변화와 관련하여 예비 고찰한 곁과, 연구 지역에는 두 가지 상이한 지하수 유통계를 이루고 있는 것으로 판단된다.