• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2003.03a
• /
• pp.121-134
• /
• 2003

본 연구대상은 $\bigcirc$$\bigcirc$우회도로 Sta.3＋300~600 구간에 형성된 높이 약 50m의 대절토 암반사면으로 대부분 절취가 완료된 상태에서, 1차로 사면 좌측부의 발파암과 풍화암의 경계부를 따라 인장균열이 소규모로 형성되면서 Slip 등 사면파괴활동이 시작되었으며, 2차로 활동높이 35m, 활동폭 40m, 활동깊이 약 l0m 규모로 붕괴되었고, 주변에도 인장균열의 발생이 확인되는 등 추가 붕괴의 징후가 있어 사면의 안정성을 검토하였다. Rock Cleavages가 발달한 천매암으로 구성된 파괴활동사면을 대상으로 지표지질조사, 추가시추조사, 전기비저항탐사, 시추공 영상촬영(BIPS)을 실시하여 사면붕괴의 원인과 추후에 예상되는 붕괴의 양상을 파악하고, 연구지역에 가장 적합한 보강대책을 수립하고자 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.5
• /
• pp.37-51
• /
• 2018

The slope failure due to the rainfall infiltration occurs frequently in Korea, since the depth of the weathered residual soil layer is shallow in mountainous region. Depth of the failure surface is shallow and tends to pass near the interface between impermeable bedrock and soil layer. Soil parameters that have a significant impact on the instability of unsaturated slopes due to rainfall infiltration inevitably include large uncertainties. Therefore, this study proposes a probabilistic analysis procedure by Monte Carlo Simulation which considers the hydraulic characteristics and strength characteristics of soil as random variables in order to predict slope failure due to rainfall infiltration. The Green-Ampt infiltration model was modified to reflect the boundary conditions on the slope surface according to the rainfall intensity and the boundary condition of the shallow impermeable bedrock was introduced to predict the stability of unsaturated soil slope with shallow bedrock under constant rainfall intensity. The results of infiltration analysis were used as inputs of infinite slope analysis to calculate the safety factor. The proposed analysis method can be used to calculate the time-dependent failure probability of soil slope due to rainfall infiltration.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.47-55
• /
• 2002

The slope reinforcing method utilized in this paper reinforces the ground overall by means of filling borehole as well as permeating grout material into ground by injecting it through the grouting pipe. In order to reflect these characteristics to design, not only the ground reinforcing effect by the structural material itself but also the ground strength improvement effect by the grouting injection must be quantitively evaluated. But precedent research of it has been insufficient. Therefore, the slope reinforcing method was applied to the weathered rockmass slope situated in the highway in order to analyze reinforcing effect and the instrumentation of slope was performed. Through analysis of this field test, the slope reinforcing method was proved to be effective and back analysis method based on instrumentation values of slope was proposed to apply to reinforcing design. In this paper, the effectiveness of reinforcing method was certified through proposed back analysis.

• Journal of the Korean Geographical Society
• /
• v.45 no.3
• /
• pp.360-374
• /
• 2010

The distributions, factors, and vegetation covers of debris slopes and changes of debris at the eastern Ongjeom-ri, Cheongsong-gun are analyzed. The important factors influencing on the developments of the slopes are felsites having advantages to the developments of cliffs and supply of enough debris, and the relatively long days below zero temperatures promoting the physical weathering processes. The distributional areas of the slopes at southern and western slopes are more extensive than those of northern and eastern slopes due to the active water evaporation by high insolation. The Ga area at eastern Ongjeom-ri has experienced the steady decreases of area of the slopes due to the vegetation covers and shows the increasing rates of vegetation covers of $431.0m^2/yr$ as averaged values. However, it is estimated at the Na area using terrestrial LIDAR that 1 or 2 debris were moved or displaed per year in slope.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.569-583
• /
• 2018

The purpose of this study is to identify the collapse characteristics by analyzing various factors causing collapse based on field survey and existing data on rock slopes occurring in the construction of roads and industrial complexes in Gyeongsangnam - do area. In the case of the slope where the slope has been directly surveyed, the analysis of the collapse characteristics can be used for the prediction and prevention of slope failure through the continuous collection of the slope data, database construction, management and analysis. The evaluation items used in the collapse characteristics of slope were selected among the items that can be regarded as objective evaluation items among the overlapping factors by comparing the evaluation items frequently used for the evaluation of the existing slope stability among various factors. The type of destruction of the rock slope depends on the type of carcass of the bedrock, such as planar fracture, wedge fracture, onho fracture, and conduction fracture, which are different from each other. And the slope stability analysis should be performed accordingly.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.439-448
• /
• 2012

The aim of this study is to develop eco-friendly, fundamental technology for vegetative restoration of barren lands using green rehabilitation material, for the stabilization of abandoned mine debris slopes and depository slopes composed of rock fragments. It is expected that such methods would help to improve the negative view of artificial slopes that remain following mining activity, while also contributing to slope stabilization and prevention of the loss of rock fragments and the dispersion of tailings. We tested the tensile strength and tear strength of various materials, including commonly used natural coir material, natural fibers, and synthetic textile materials with enhanced durability. In conclusion, there is the possibility that natural coir can be used as an eco-friendly material in vegetation restoration, while its durability in natural conditions can be improved by controlling the degree of knot convolution and by antibacterial treatment against biodegradation.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.03a
• /
• pp.204-218
• /
• 2001

절토사면은 토층, 풍화토, 풍화암, 연암, 경암 등의 풍화도가 다른 물질로 구성되어 있어 지반구성 물질에 대한 공학적인 판단이 쉽지 않으며 시공 중 또는 후에 사면의 안정성 문제가 대두되고 있는 실정이다. 사면의 안정성 문제는 과거 30여 년 동안 고속도로의 많은 절토사면에서 경험되어 왔으며 현재에도 계속적으로 사면붕괴 및 복구를 경험하고 있으나 체계적인 관리 및 조사가 이루어지지 않고 있다. 따라서, 본 연구는 절토사면의 체계적인 관리체계의 구축과 효율적인 자료분석을 위하여 사면관리용 데이터베이스 프로그램을 개발하였다. 이들 관리프로그램을 활용한다면 국내에 분포하는 암반의 내적 요인들에 대한 지질 공학적인 특성을 파악할 수 있으며 지역에 따라 분포하는 암석종류, 지질시대 및 지질구조에 따라 붕괴유형 및 발생빈도 등을 분석함으로써 도로 및 주택단지의 개설시 예비적인 사면안정문제를 예견할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1787-1791
• /
• 2009

지표수의 유출과정을 설명하는 과정에서 중요인자이며, 생태수문학의 핵심변수이자 기상모형의 중요한 입력변수인 토양수분의 공간적 시간적 특징들은 강우 및 지하수와 토양수분간의 순환 구조를 규명하는데 매우 중요하다. 가장 널리 쓰이는 토양 수분 측정 장비인 TDR 장비 매설에 앞서 대상유역 선정에 대한 여러 가지 고려사항을 검토하고 수치지형 분석 등을 통한 사전분석을 실시하였다. 대상유역을 선정하기 위해서는 대상유역의 자료획득의 용이함, 지정학적, 시스템 운영적 측면에서의 가용성, 그리고 정밀측량 및 부수적요인 등 여러 요소의 고려가 요구된다. 청미천 유역을 대상으로 약 21 개의 대상후보사면을 정밀조사 하였으며, 충청북도 음성군 수레의산 청소련 수련원내의 산지 사면을 측정대상 사면으로, 지정학적 위치, 식생분포, 지질구조 및 심도 등의 토양특성의 고려를 통해서 선정하였다. 또한 대상 사면에 흐름 발생 및 분포를 계산하기 위해서 대상사면의 지표 및 기반암 표고를 정밀 측량하였으며, 기반암 또는 풍화대까지의 깊이를 실측하여 지표면 및 지하면의 수치지형 모형을 구축하였다. 대상사면 및 지하면에 대하여 표고수치지형모형(Digital Elevation Model:DEM)으로 도식한 후 흐름 발생 공간 분포를 계산하였다. 다양한 흐름 발생 알고리즘으로 기여사면적과 지형습윤지수를 계산하였다. 분배알고리즘의 의해 도출된 지형인자들로 인한 흐름발생 공간적 분포특성을 비교하여 센서의 매설 위치를 결정하였다. 센서 매설 위치에 대한 토양시료를 채취하여 토성을 분석한 결과는 미국 농무성 기준에 의한 분류로는 사양토로, 국제토양학회의 분류기준에 따르면 양토로 분류되었다. 대상사면의 유효입력강우를 확보하기위해서 개방공간인 수레의산 청소년수련원과 대상산림의 Canopy하부에 각각 강수측정 시스템을 설치하였고 약 6개월간 성공적으로 자료를 획득하였다.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2009

Geophysical surveys were conducted on an upper part of a natural slope located at Daejeon University. Electrical resistivity and seismic refraction measurements were carried out to obtain information on a weathered zone and internal structure at shallow depth, while AMT measurement a bed rock and geological structure at deep depth. With all the techniques applied, these results show a good correlation between electrical resistivity images and refraction velocity distributions for the characterization of a weathering and geological structure at depth. In particular, AMT survey seems to be the powerful tool for detecting a distribution of a bed rock with deep depth. The combined geophysical investigation produced a detailed image of a subsurface structure and improved well in the interpretation.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.57-64
• /
• 2011

Three-dimensional slope stability analysis was applied to a failed dual-lithology slope containing both granite and an andesitic dyke, taking account of the differences in shear strength of the different lithologies. A direct shear test of the soil-rock boundary was performed to examine the shear strength of two different types of failure surfaces within different lithologies, and a laboratory test was performed on an upper, weathered soil layer. The test results indicate that shear strength was lower at the soil-rock boundary than within the weathered soil layer. A representative geological section was subjected to two-dimensional slope stability analysis using a limit equilibrium method to assess whether the distribution of lithologies upon the slope influences the results of stability analysis. The results were then compared with those of three-dimensional slope stability analysis, for which input parameters can be varied according to the distribution of lithologies upon the slope. The three-dimensional analysis yielded safety factors of 1.26 under dry conditions and 0.55 under wet conditions, whereas the two-dimensional analysis yielded unstable safety factors of 0.92 and 0.32, respectively. These findings show that the results of stability analysis are affected by the distribution of different lithologies upon the slope. Given that the studied slope collapsed immediately after rainfall, it is likely that the results of the three-dimensional analysis are more reliable.