• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1619-1626
• /
• 2020

In this study, the physical properties of water-dispersible polyurethane resins synthesized with polyammonium phosphate and HMDI were studied by coating film samples and full-grain surfaces. Solvent resistance was found to be unchanged in all samples, and in terms of tensile strength, DPU-AP3 (1.887 kgf/㎟) containing the most ammonium polyphosphate showed the lowest physical properties. The elongation rate was measured as 54 8% in the sample containing a large amount of ammonium polyphosphate. Abrasion resistance was measured as 548 mg.loss of a sample containing a lot of ammonium polyphosphate, and it was confirmed that the physical properties of the blended resin of ammonium polyphosphate and water-dispersible polyurethane were changed.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.307-308
• /
• 2001

본 연구는 서울, 청주, 춘천 세 개 도시 대기에서의 입자상 물질에 대한 분석을 Electron Probe X-ray Microanalysis(EPMA)를 이용한 단일 입자 분석법으로 행하였다. 단일 입자 분석법은 개개 입자의 형상과 크기 그리고 화학 조성에 대한 정보를 동시에 제공하기 때문에 개개 입자의 생성, 이동, 반응 그리고 환경에의 영향에 대한 자세한 정보를 얻을 수 있다. 또한 최근에 개발된 ultrathin window를 장착한 EPMA 분석법(Low-Z EPMA)은 종래의 통상적인 EPMA 방법으로는 분석하기 어려웠던 탄소, 질소, 산소 등의 원소를 정량적으로 분석할 수 있다. 따라서 도시 대기의 중요 구성 입자상 물질인 황산염, 질산염, 암모늄염, 유기 입자 등도 포함하여 도시 대기 입자 분석에 유용하게 활용된다. (중략)

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.23-30
• /
• 1983

This experiment was carried out for diminishing the material loss and the damage of human life due to the fire disaster by treating plywood with fire retardant chemical solution. At this study, we observed and measured chemical retention, burning point, maximum flame length, flame exausted time, carbonized area, and weight loss of plywood treated by each solution of ammonium sulphate [$(NH_4)_2SO_4$] and monoammonium phosphate [$NH_4H_2PO_4$]. Obtained results at the study may be summarized as follows: 1. In case of monoammonium phosphate-treated plywood, every tested item of fire retardancy was shown more excellent at the 25% chemical concentration and shown also at 9 hours treatment except maximum flame length compared with ammonium sulphate-treated plywood. 2. However in case of ammonium sulphate-treated plywood, 6 hours treatment of fire retardancy was better than 9 hours treating time. 3. Monoammonium phosphate was generally better than ammonium sulphate in every tested item.

• 한국해양학회지
• /
• v.4 no.2
• /
• pp.83-86
• /
• 1969

해양관측의 세계적인 공통성으로 해서 염분검정법이 이미 오래 전부터 통일화 되었지만 근래에 와서는 용존산소량 정량법도 국제적인 Intercalibration을 하는 등규격화에의 기운이 나고 있다. 다시 Kuroshio 합동조사에서는 영양염의 정량에 있어 공통된 표준용액을 사용하므로써 조작상의 편리와 측정치의 신뢰성을 더욱 향상시키자는 의도에서 일본이 국제적인 영양염 표준용액의 조제 및 배포에 관한 안을 내어 1965년 Manila 회의를 거쳐 일본 상모중앙화학연구소의 관원씨가 이를 맡아 1966년부터 시작하여 1967년까지에 요오드산칼리움, 아질산염, 인산염, 규산염의 표준용액을 만들어 1968년 봄부터 시험적으로 일본국내와 동남아 수개국에 나누어 사용해 왔던 것이다. 다시 1968년 9월의 SCOR 의 영양염에 관한 Working Group 회의에서 CSK Std. Solution을 사용하여 세계각국에서 현재 사용하고 있는 영양염 분석방법의 Intercalibration을 하자는 회의가 있었고, 이것을 권고사항으로 SCOR에 보고하여 1968년 11월에 ICES가 승인하므로써 Intercalibration에 관한 원칙이 정해졌다. 동시에 Finland의 Koroleff씨와 Palmork씨가 organizer로 정해졌던 것이다. 이 보다 약간 앞서 본인이 상모중연에 가 있을 때 Std. Solution으로서 아질산염용액 만으로 각종무기질소화합물의 표준용액으로 대용한다는 것은 비합리적이므로 질산염과 암모늄염의 표준용액이 있어야 한다고 주장하여 우선 질산염용액을 추가로 만들기로 하여 1968년 11월부터 표준물질의 정제부터 시작 되었다. 1969년 1월에 Intercalibration 에 관한 구체적인 회의를 위해 Scripps 해양연구소에 관원, Wooster Rakestraw, Cieskes씨등이 모여 우선 일본상모중연에서 만들고 있는 인산염, 질산염, 아질산염, 규산염의 CSK 표준용액을 표준시료로하여 SCOR 과 ICES의 해양화학분과에서 선정한 세계 100개처에 나누어 현재 각자가 사용하고 있는 방법의 정밀도와 정확도를 check하는 소위 International intercalibration을 1969년 9월부터 시작하기로 확정을 보았고, 동시에 구체적인 지시가 있었던 것이다. 이시료를 받는 사람에게는 다만 그것의 농도범위만 알려주고 정확한 농도는 Koreleff와 관원씨만이 알고 있기로 하여 측정에 분석자의 주관이 개입되지 못하도록 했고, 분석치는 SCOR가 모아 해석하되 번호제로 하여 어떤 나라의 누구가 했다는 것은 밝히지 않기로 되어 있다. 이같은 내력으로 CSK Std. Solution이 국제적인 Intercalibration용의 표준시료로서 시험적으로 사용되기 까지는 되었으나, CSK Std. Solution 그자체에 관해서는 아직도 해결해야 할 점, 개량을 요하는 점이 많다. 이하에서는 주로 개량을 요하는 점에 관해 몇가지 언급하고자 한다.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.129-134
• /
• 1999

This study is related to the investigation of the direct incorporation of $CO_2$ to polymer using quaternary ammonium salt catalysts. Quaternary ammonium salts showed good catalytic activity of $CO_2$ fixation in the synthesis of poly[(1,3-dioxolane-2-oxo-4-yl)methyl methacrylate] [poly(DOMA)] by the direct incorporation of $CO_2$ to poly(glycidyl methacrylate)[poly(GMA)]. Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed higher catalytic activity. The yield of carbon dioxide addition increased with the reaction temperature. Kinetic study was carried out by measuring the variation of $CO_2$, pressure in a high pressure batch reactor. The reaction rate was first order to the concentration of poly(GMA) and $CO_2$, respectively. The rate constant was $0.69L/mol{\cdot}h$ and Henry's constant of $CO_2$ in DMSO at $80^{\circ}C$ was $6.8{\times}10^{-4}mol/L{\cdot}KPa$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.575-581
• /
• 2020

A colorless antistatic agent was prepared for use in antistatic films for liquid crystal displays (LCDs) requiring low surface resistance and high transmittance. Among various lithium-fluoro compounds and quaternary ammonium salts, antistatic materials were selected based on their electrical conductivity, and antistatic agents were prepared to measure the surface resistance. As a result, the material with high conductivity showed a relatively low surface resistance, i.e., relatively good antistatic performance. Based on the antistatic materials selected, the formulation ratio for producing the best antistatic agent was established through the experimental design method and the effects of each factor were analyzed. The higher the use of lithium- fluoro compounds as antistatic materials, the higher the ratio of oligomer use with multi-functional groups, and the smaller the surface resistance. The quaternary ammonium salts increased the antistatic performance of the lithium-fluoro compounds, but the effects of the amount used were not relatively large. After manufacturing the antistatic PET film, the properties of the antistatic film showed low surface resistance values (<10⁹ Ω/sq.), high permeability (>92%), low haze (<0.5%), and high whiteness (L^⁎>95). In addition, the antistatic film reliability was found to be excellent by showing a stable surface-resistance change rate of less than 10%, even under high temperature and high humidity conditions.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1156-1163
• /
• 1996

This study is related to the investigation of the characteristics of quaternary ammonium salt catalyst on the addition reaction of carbon dioxide and glycidyl methacrylate(GMA) to form(2-oxo-1,3-dioxolane-4-yl)methacrylate(DOMA). Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed a higher catalytic activity. Mixed catalysts of NaI and 18-crown-6 showed a good yield of DOMA, but when they are used alone, they showed no catalytic activity. The DOMA monomer was obtained in low polar solvents, while poly(DOMA) could be directly synthesized in aprotic dipolar solvents. Kinetic studies carried out by measuring $CO_2$ pressure in a high pressure batch reactor showed that the reaction rate was first order to the concentration of GMA and $CO_2$ respectively. The rate constant(k) was 0.56L/mol hr and Henry's constant(H') of $CO_2$ in diglyme at $80^{\circ}C$ was $6.5{\times}10^{-4}mol/L{\cdot}kPa$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.96-98
• /
• 2000

암모니아는 대기 중에서 가장 대표적으로 존재하는 염기성 미량기체로서 SOx나 NOx와 같은 산성기체와 반응하여 대기중 산성도를 중화시키고 2차적 에어로졸을 생성한다. 암모니아가스는 이 반응에 의하여 에어로졸 내에서는 암모늄 이온(${NH_4}^{+}$)으로 존재하게 된다. 산성기체를 중화시킨다는 입장에서 염생성 반응은 산성기체의 제거 기작이 될 수 있으나 이 때 생성된 에어로졸은 주로 PM2.5 이하의 2차적 에어로졸로 존재하여 호흡기장애, 건물 부식, 시정 감소 등의 피해를 주는 오염물질이 된다. (중략)

• Resources Recycling
• /
• v.28 no.1
• /
• pp.15-22
• /
• 2019

There are three hydrometallurgical methods by which pure alumina can be prepared, such as hydrolysis of aluminum alkoxides, thermal decomposition of ammonium alum and thermal cracking of ammonium aluminum carbonate (AACH). The effect of solution pH and temperature and the nature of the impurities on the phase transition and the purity of the alumina thus produced was investigated. Hydrolysis of aluminum alkoxides and thermal decomposition of ammonium alum produce ${\alpha}$ and ${\gamma}$ alumina, while only ${\alpha}$ alumina can be produced by thermal cracking of AACH.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.40-48
• /
• 2022

In this study, the effects of solution components were investigated in the recovery of vanadium as ammonium metavanadate from vanadium-ore-salt roasting-water leaching solution. The vanadium-containing solution is strongly alkaline (pH 13), so the pH must be lowered to 9 or less to increase the ammonium metavanadate precipitation efficiency. However, in the process of adjusting the solution pH using sulfuric acid, aluminum ions are co-precipitated, which must be removed first. In this study, aluminum was precipitated in the form of an aluminum-silicate compound using sodium silicate, and the conditions for minimizing vanadium loss in this process were investigated. After aluminum removal, the silicate was precipitated and removed by adjusting the solution pH to 9 or less using sulfuric acid. In this process, the concentration and addition rate of sulfuric acid have a significant influence on the loss of vanadium, and vanadium loss was minimized as much as possible by slowly adding dilute sulfuric acid. Ammonium metavanadate was precipitated using three equivalents of ammonium chloride at room temperature from the aluminum-free, aqueous solution of vanadium following the pH adjustment process. The recovery yield of vanadium in the form of ammonium metavanadate exceeded 81%. After washing the product, vanadium pentoxide with 98.6% purity was obtained following heat treatment at 550 ℃ for 2 hours.