• Journal of Korea Water Resources Association
• /
• v.43 no.3
• /
• pp.275-282
• /
• 2010

The purpose of culvert design is to determine optimum size for a safe drainage of flood discharge. The present method of culvert design in Korea is generally carried out by using "Road Drainage Design" of Korea Expressway Corporation (1991), which is based on the manual of Federal Highway Association (FHWA) of USA. However, this method may result in subjective error because of using graphs and the usage of nomograph can be a major obstacle for computer modelling. Some errors found in the previous works of culvert design are corrected, and a new logic has been developed for a simple determination of culvert size in this study. FHWA (1985) presents a nomograph to determine the critical water depth and the velocity head for a circular pipe, but in this study simple explicit equations have been developed to determine both respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.625-629
• /
• 2010

암거 수리설계는 상류부의 수위를 과다하게 상승시키지 않는 상태에서 안전하게 계획홍수량을 하류로 소통시킬 수 있도록 최적의 단면을 결정하는 것이다. 현재 국내 암거 설계는 한국도로공사(1991)에서 발표한 "도로배수계획"을 이용하고 있는데, 이는 주로 미국도로성(FHWA)에서 발표한 설계기법을 따른 것이며, 이 기법은 설계항목과 관련되는 설계유량과 지배단면을 결정하여 시행오차적인 방법으로 계획 상류부 수심을 산정하는 순서로 진행된다. 상류부 수심을 결정하기 위해서 미국도로성의 기법은 계산도표를 이용하여 손실 수두와 한계수심을 산정한다. 그러나 계산도표를 이용하여 설계할 경우 주관적인 오차가 생길 수 있으며 전산해석에 있어서도 큰 장애요인이 될 수 있다. 본 연구에서는 기존 연구에서 기술된 암거 설계법을 전반적으로 재검토하여 일부 수식 전개 과정에서 발생한 오류를 수정하고, 암거의 규격 산정 시 암거의 형상을 미리 결정하여 암거 프로그램 개발 시 효율적일 것으로 판단되는 새로운 방법을 개발하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.645-649
• /
• 2008

노모그래프 또는 간략식을 이용하여 암거 설계를 하는 경우 암거 흐름이 자유수면을 가지는 개수로라면 정확한 흐름 해석을 할 수 없다. 특히 암거는 수리학적으로 짧기 때문에 암거 흐름에서 등류수심이 발생하지 않을 가능성이 높다. 이에 부등류(점변류) 해석을 이용하여 암거의 흐름 해석을 수행하도록 흐름 해석 모형을 개발하여 검증하고, 이를 기반으로 암거의 단면규격을 결정하는 설계모형을 개발하였다. 암거의 수리설계는 고려하고 있는 모든 단면에 대하여 흐름 해석을 수행하고, 산정된 상류수위(HWE)와 암거높이에 대한 상류수심의 비(H/D)가 허용치를 초과하지 않는 최적 단면을 설계 단면으로 결정한다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.818-820
• /
• 2011

본 논문에서는 도로 지하에 매설되어 있는 2m${\times}$2m 정도 규격의 박스형태 암거의 좁은 공간에서 원활하게 준설작업을 할 수 있는 준설시스템의 개발을 하고자 한다. 준설시스템의 작업과정은 지하에 매설된 암거의 내부를 �렵罹만� 원격 조정하여, 오염된 슬러지 준설 작업을 수행하는 준설기와 슬러지를 지상으로 반출하는 유압식 듀얼 이송스크류 슬러지 배출 차량 및 지상으로 반출된 슬러지의 수분을 제거하는 슬러지 탈수 처리 장치로 구성되어 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2774-2779
• /
• 2010

In this paper, we develope the bucket driven dredger for sludge treatment in box type culvert. The dreadger is opererated in $2m\;{\times}\;2m$ box type narrow culvert under the road, and controlled using remote controller on the remote zone. In order to operate under dangerous environment, we develope the bucket drived dredger, and we will commercialize the result.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.111-121
• /
• 2007

During the whole month of December in 2005, Korea experienced both heavy snowfall and freezing temperature in southeast regions, which had caused frost related damages to many pavements laid on top of box culverts. In-situ observation revealed that the formation of ice lenses in subgrade and subsequent unbound layers led to upward heaving and transverse cracks in concrete and asphalt pavements. This has affected the long-term performance of pavements, as well as has threatened drivers' safety for a while. Recently, Korea Expressway Corporation has proposed a design guide to better protect newly constructed unbound pavement layers over culverts from frost heave. A trench drainage system has been selected to effectively draw off water and to alleviate pore-water pressure in soils during the coldest season. This paper presents experimental and analytical backgrounds behind this new design guide. Soil specimens retrieved from the sites are tested to quantify clay content and to estimate the permeability of subgrade. A 2-D ground seepage analysis has been conducted to better understand the changes in pore water pressures as a function of grain size. Finally, an optimum size of trench drainage is determined based on numerical analysis and workability in the field.

• Korean Journal of Environment and Ecology
• /
• v.20 no.3
• /
• pp.340-344
• /
• 2006

The objective of this paper was to investigate the potential of road-crossing structures as biological corridors that can overcome wildlife habitat fragmentation caused by road construction. Snow tracking on animal trace adjacent to and under bridges, underpasses, and culverts of eight rural highways in Korea was carried out. A total 89 structures were monitored and the results follow. First, the probability of road crossing increases with the increasing cross sectional size of crossing structures. Second, small to medium sized carnivores such as raccoon dog, leopard cat, and Siberian weasel use all types of structures. Finally, water deer, or large herbivore crossed only under bridges. Consequently, further studies are necessary to identify suitable types of road crossing structures that can mitigate the probability of road-kills and habitat fragmentation of water deer.

• Journal of Korea Water Resources Association
• /
• v.45 no.4
• /
• pp.419-430
• /
• 2012

Due to the calculation difficulty on the hydraulic and hydrologic analysis for road drainage facilities design, these analysis techniques are not applicable. This study's result are development of minutely rainfall-intensity equation suitable for road drainage area, verification of rainfall-runoff model joining kinematic wave theory for road drainage area, computational model based GUI for road surface drainage facilities spacing and culvert's size decision and various road drainage channel design. Applicable test on the developed model is proceed, result that in case of road surface dranage facilities spacing is narrower 6~65% than present spacing calculation method, in other case of road cross dranage facilities size is bigger 6~140% than present size decision method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.941-944
• /
• 2008

Various ductile fiber reinforced cement composite(DFRCC) including large quantities of PVA fiber or steel fiber have been developed recently and studies to find applications in diverse domains are currently conducted actively. Regard to economical efficiency, DFRCC becomes competitive when applied as special elements and repair material with small quantities rather than the casting of large volume for the main body of structures in field. The authors have developed FRP-DFRCC composite slab for bridges and a wet spraying repair technique using DFRCC. In case of the application on FRP-DFRCC composite slab, it was found that there was no problems the structure and durability of it after passed 3 months. And in case of the application on the application of the deteriorated sewage box that passed 20 years, it was found that there was no difference the repair performance between domestic PVA fiber and the Japan. Therefore, DFRCC using PVA fiber, the concrete structures can be increased to performance and secured the economical efficiency.