• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.767-773
• /
• 2016

A Weibull statistical analysis of the mechanical properties of SiC ceramics was carried out by immersion in acidic and alkaline solutions. The heat treatment was carried out at 1373 K. The corrosion of SiC was carried out in acidic and alkaline solutions under KSL1607. The bending strength of corroded crack-healed specimens decreased 47% and 70% compared to those of uncorroded specimens in acidic and alkaline solutions, respectively. The corrosion of SiC ceramics is faster in alkaline solution than in acid solution. The scale and shape parameters were evaluated for the as-received and corroded materials, respectively. The shape parameter of the as-received material corroded in acidic and alkaline solutions was significantly more apparent in the acidic solution. Further, the heat-treated material was large in acidic solution but small in alkaline solution. The shape parameters of the as-received and heat-treated materials were smaller in both acidic and alkaline solutions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.490-499
• /
• 2008

Statement of problem: Bioactive materials must have the ability to spontaneously form a bone like apatite layer on their surface and induce direct biochemical bonding to bone. A simple chemical treatment via alkali and heat has been revealed to induce bioactivity in titanium. Purpose: The purpose of this study was to evaluate the surface characteristics and stability of alkali and heat treated implants. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface implants, groups 2 and 3 were treated with alkali solutions and heat treated in the atmosphere and vacuum conditions respectively. The surface characteristics were observed with FESEM, XPS, TF-XRD and AFM. Stability was evaluated with the resonance frequency analysis, periotest and removal torque values. One-way ANOVA and Duncan test were used for statistical analysis. Results: 1. Groups treated with alkali and heat showed similar characteristics. Groups 2 and 3 showed high compositions of Na ions on the surface with sub-micron sized pores compared to group 1. Group 2 showed mixed compositions of anatase and rutile with superior contents of rutile. 2. Resonance frequency analysis : The ISQ of group 2 showed significantly higher values than that of groups 1 and 3 at 12 weeks. The ISQ of groups 1 and 2 showed significant increase after 4 weeks, and the ISQ of group 3 increased significantly after 2 and 4 weeks respectively (P < .05). 3. Periotest: The PTV of groups 1 and 2 showed significant decrease after 4 weeks, and the PTV of group 3 showed significant decrease after 2 and 4 weeks respectively (P < .05). 4. Removal torque analysis: The removal torque value of group 2 was significantly higher than those of groups 1 and 3 at 2, 4 and 8 weeks. The removal torque values of groups 1 and 3 showed increase at 4 and 12 weeks, but the removal torque value of group 2 showed increase after 4 weeks (P < .05). Conclusion: An oxide layer with appropriate crystal structure and amorphous sodium titanate layer can be obtained on titanium implants through alkali and heat treatment in the atmosphere, and even alkali and heat treatment in vacuum conditions, provided a bioactive surface containing sodium. These surface layers can be considered to be effective for enhancement of osseointegration and reduction of healing period for implant treatment.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.849-859
• /
• 2000

This study was conducted to identify the characteristics of methane fermentation and lysis effects of pre-treated microalgae. Chemical compositions of microalgae showed that the VS(volatile solid) was 86.1% of TS(total solid), and the protein was 63.5% of VS. These values were higher than those of activated sludge. The cell lysis test of raw microalgae biomass was conducted by many physicochemical methods. presenting that the degree of cell lysis was affected by following order: ultrasonic(100min.), alkali(pH 13), ultrasonic(10min), thermal($120^{\circ}C$), thermal($50^{\circ}C$), and acidic(pH 3) treatment. Methane fermentation with many pre-treated samples was performed, showing that the concentration of acetic acid was the highest. followed by propionic acid, butylic acid and valerie acid among all VFA(volatile fattic acid). In methane production. ultrasonic samples were only more effective than untreated one in total gas and methane productivity. but other samples were less effective. Especially. the alkalic sample had an inhibitation effect on methanogens.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.90-98
• /
• 2001

The slow degradation rate of sewage sludge in anaerobic digesters is due to the rate limiting step of sludge hydrolysis. Therefore, the pre-treatment process had been carried out using acidic(pH 1.5, 3, 4, 5) and alkaline(pH9, 10, 13), thermal(50, 100, 150, $200^{\circ}C$) and ultrasonic treatment(400W, 20kHz, 15, 20, 25, 30, 35, 40, 50, 60min). In the best conditions of each treatment, the SCOD ratio(%) of treated/untreared samples were increased 102% in acid(pH5), 986% in alkali(pH13), 959% in thermal($200^{\circ}C$) and 1123% in ultrasonic(35min) treatment. As the result, the ultrasonic treatment was most effective, followed by alkali, thermal, acidic treatment. In the effects of total gas productivity, the thermal($200^{\circ}C$) pretreatment was the highest, followed by thermal($150^{\circ}C$), ultrasonic(90min), alkaline(pH9) and ultrasonic(50min).

• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.435-440
• /
• 1987

Gelatinization properties of heat-mositure treated potato and sweet potato starches were investigated. Water-binding capacity of starch was increased by heat-mositure treatment, which was more pronounced in sweet potato starch. Blue value was not affected by the treatment. Amylograph viscosities were decreased by heat-mositure treatment, which was more pronounced in potato starch. Critical concentration of NaOH for gelatinization of starch increased as moisture level increased. Gel volume of starch upon KSCN gelatinization was higher in potato starch. Gelatinized starches showed Binghamapseudoplastic behavior. Consistency index and yield stress were drastically decreased upon heat-moisture treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.445-456
• /
• 2009

Statement of problem: Many studies have been conducted to improve the primary stability of implants by providing bioactive surfaces via surface treatments. Increase of surface roughness may increase osteoblast activity and promote stronger bonding between bone and implant surface and it has been reported that bioactive surface or titanium can be obtained through alkali and heat treatment. Purpose: The purpose of this study was to evaluate the stability of alkali and heat treated implants via histomorphometric analysis. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface, the other groups were treated for 24 hours in 5 M NaOH solution and heat treated for 1 hour at $600^{\circ}C$ in the atmosphere (group 2) and vacuum (group 3) conditions respectively. Surface characteristics were analyzed and fixtures were implanted into rabbits. The specimens were histologically and histomorphometrically compared according to healing periods and change in bone composition were analyzed with EPMA (Electron Probe Micro Analyzer). Results: 1. Groups treated with alkali and heat showed increase of oxidization layer and Na ions. Groups 2 which was heat treated in atmosphere showed significant increase of surface roughness (P<.05). 2. Histomorphometric analysis showed significant increase in BIC (bone to implant contact) according to increase in healing period and there was significant increases in groups 2 and 3 (P<.05). 3. BA(bone area) ratio showed similar results as contact ratio, but according to statistical analysis there was significant increase according to increase in healing period in group 2 only (P<.05). 4. EPMA analysis revealed no difference in gradation of bone composition of K, P, Ca, Ti in surrounding bone of implants according to healing periods but groups 2 and 3 showed increase of Ca and P in the initial stages. Conclusion: From the results above, it can be considered that alkali and heat treated implants in the atmosphere have advantages in osseointegration in early stages and may decrease the time interval between implantation and functional adaptation.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.54-58
• /
• 2005

The hydrolytic behavior of microbial poly[(R)-3-hydroxybutyrate]](P(3HB)) has been studied by using two model systems, Langmuir monolayer and solution-grown single crystals (SCs), for elucidating the mechanism for both alkaline and enzymatic degradations. An initial degradation of SCs of P(3HB) leads to breakup lamellae parallel to their short axis (b-axis). Similarly, ridge formation on the lamellar surface appears along the b-axis at lower quenching temperature than melting temperature. Both results support that the lamellar crystals contain less-ordered and more thermally sensitive regions along the b-axis. Although the enzymatic hydrolysis of P(3HB) monolayers was similar to its alkaline one, the enzymatic degradation of P(3HB) monolayers occurred at higher constant surface pressure than the alkaline degradation. This behavior might be attributed to the size of enzymes which is much larger than that of alkaline ions; that is, the enzymes need larger contact area with monolayers to be activated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.15-21
• /
• 2023

To prepare zinc oxide powder, three types of sodium-based alkali precipitants such as NaOH, Na₂CO₃, NaOH/NaHCO₃ were compared to the differences in the manufacturing process of zinc oxide powder from zinc precipitate products like intermediates with the consideration of thermodynamic reaction. The prepared zinc precipitate products by the reaction with the sodium-based alkali precipitant were confirmed to respectively hydroxy zinc chloride (Zn₅(OH)₈Cl₂·H₂O) and zinc carbonate hydroxide (Zn₅(OH)₆(CO₃)₂·H₂O) from XRD analysis. Zinc oxide particles were compared in heat treatment at 800℃ according to sodium-based alkali precipitants. The mixed NaOH and NaHCO₃ of alkali precipitant reaction was contributed to synthesize the more uniform zinc oxide particles.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.108-108
• /
• 2011

PLA 즉 폴리유산섬유는 옥수수를 발효하여 글루코오스(포도당)상태를 만든 후 젖산(유산, Lactic acid)으로 만들고 이것을 탈수, 축합반응시켜 polylactic acid로 만든 것이다. 생분해성이 있으므로 저탄소, 녹색성장의 모토를 대변하는 소재라는 이점이 있다. 구조는 에스테르기의 반복단위를 가지는 소수성 섬유로 벤젠환은 없으나 그 외 구조는 폴리에스테르와 비슷하며, 에스테르기가 존재하므로 분산염료와 수소결합하여 염착된다. 그러나 PLA는 융점이 $170^{\circ}C$, Tg $57^{\circ}C$로 내열성이 낮아서 염색온도, 열처리온도, 다림질에 제약이 있으며, 알칼리에 약한 단점이 있다. 따라서 PLA섬유는 낮은 염착량, 내알칼리성, 염착온도 때문에 염색 및 후가공 단계에 많은 사전 실험을 통한 조건 설정이 필요한 까다로운 섬유이다. 본 연구에서는 (주)휴비스의 PLA원사로 제직한 직물(경사:DTY 75/72SD, 위사:DTY 100/72SD, 조직:DOBBY) 생지에 대하여 열처리 시 장력의 유무, 온도, 시간에 따른 폭의 변화를 측정하여 수축률을 알아보았다. 또한, PLA직물을 온도별로 정련한 후 열처리하여 인열강도 측정을 통해 최적 전처리 조건을 조사하였다. 실험결과, PLA생지를 무장력 상태에서 열처리 시 수축이 심하게 일어나고, 장력이 주어져도 열처리 온도에 따라 수축의 정도에 차이가 나타났다. 열처리 시간은 30, 60, 90, 120초로 주었으나 큰 편차는 없었고, 경사가 위사보다 수축 정도가 더 컸으며, $130^{\circ}C$에서는 전체적으로 수축이 심하였다. 생지의 정련에는 인산에스테르계 정련제와 약알칼리인 탄산나트륨으로 조액하여 60, 70, 80, $90^{\circ}C$에서 10분간 처리한 후, Lab. tenter(Mathis, LTE)를 이용하여 110, 120, $130^{\circ}C$에서 30, 60, 90, 120초간 열처리한 다음, KS K 0535 펜듈럼법에 의거하여 인열강도를 측정하였다. 그 결과, 상기 정련온도에서는 인열강도에 영향을 주지 않았으나, 열처리 온도가 $130^{\circ}C$일 때 현저한 강도의 저하를 나타내었다. 실험조건 하에서 가장 적절한 열처리 조건은 $110^{\circ}C$, 60초로 사료된다. 따라서 PLA의 약한 내열성과 내알칼리성 실험결과, 강도나 수축 등 물성변화가 일어나지 않도록 열처리 온도의 제어에 주의가 필요함을 확인할 수 있었다. 실제 섬유가공 작업현장에서는 일반적으로 열처리기가 $180^{\circ}C$이상의 고온으로 고정된 경우가 많은데, 작업자들에게 PLA소재에 대한 사전주의 및 공정변경에 대한 주지가 요구된다.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.33-44
• /
• 2010

In this study, the possibility of utilizing carbide lime waste, obtained from the generation of acetylene process, as a alkali activator of blast furnace slag cement was investigated. The physical and chemical analysis of the carbide lime waste was studied and three types lime waste in order to investigate behaviour as alkali activator were used. Lime wastes were added 0, 10, 20 and 30 wt.% in blast furnace slag and blast furnace slag containing lime waste were added 0, 10, 30 and 50 wt.% in OPC. As a result of analysis of hydration properties, in the case of calcium hydroxide rehydrated after heat treatment at $800^{\circ}C$, it was higher hydration rate than other specimens. For the results of compressive strength test, when lime waste passed 325 mesh sieve and rehydrated calcium hydroxide were used, it was higher compressive strength than OPC from hydration 7days. At OPC50 wt.%-BFS45 wt.%-AA5 wt.% system using lime waste of 325 mesh under, the highest compressive strength appeared.