• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1608-1618
• /
• 2005

The purpose of this investigation was to investigate the degradation products of the dye component extracted from madder dyed fabrics using the GC-MS analysis and to evaluate the change of color due to degradation treatment. Four different degradation protocols were used in this study,; refrigeration at $7^{\circ}C$ (LT), room temperature (RT), oven treatment at $100^{\circ}C$ (OV), and $H_2O_2/UV(PER)$ method. Degradation times for each thermal system were 6 hour, 24 hour, 48 hour, 1 week, 2 week, 4 week. Alizarin was detected from the control and degraded samples of both alizarin dyed and madder dyed fabrics. Benzoic acid, 2, 4-di-tert-butylphenol, phthalic anhydride were detected as the degradation products for both alizarin dyed and madder dyed fabrics. The result suggest that these products can be used as the fingerprints of GC-MS analysis for the identification of madder dye in archaeological textiles. Both alizarin dyed and madder dyed samples became less red and less yellow after degradation. In the PER degradation system madder dyed sample showed the greatest color difference even after 1 week of degradation treatment. Further research is necessary for investigating the color change in the exhumed textiles, which is caused by the dual action of dye fading and the staining of organic matters in the soil.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.590-597
• /
• 2013

This study examined the change in the dyeability of natural dyes on cotton fabrics by a PEI (polyethyleneimine) pretreatment instead of mordants. Cotton fabrics were treated with PEI and the changes in the dyeability were shown by measuring the amount of PEI on cotton fabrics. Samples treated with PEI were dyed with two natural polychromatic dyes with a different affinity to cotton fibers: Alizarin Red S and Curcumin. The changes in dyeability by three variables (time, temperature and concentration of dyes) on cotton fabrics were analyzed by the K/S value to define optimum dyeing conditions. Subsequently, the PEI treatment improved the dyeability of cotton fabrics with both dyes of low and high affinity to cotton fibers. Thus, PEI could be a suitable heavy metal mordant replacement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1350-1357
• /
• 2003

This research was aimed to establish the standard extraction and analytical procedures for examining the chromophoric substance in madder root with the ultimate goal of identifying the dyes in badly faded textiles of archaeological origin. The separation temperature of gas chromatography, pH and other extraction conditions were tested. The results were as follows: The suitable separation temperature for the GC cappillary column was 50∼305$^{\circ}C$, and methanol was a good GC solvent for both standard alizarin and madder extraction. The best extraction of madder was achieved by 90 min soaking in room temperature followed by filtration and the actual heat extraction procedure. The best pH for extracting alizarin was pH 3 and above pH 5 alizarin was not detectible. Only alizarin and no purpurin was found in the extraction of the currently used madder plant.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.9
• /
• pp.1301-1307
• /
• 2002

This paper surveys the mordanting and dyeing properties of Rubia akane Nakai appropriate extraction, dyeing and mordanting conditions of Rubia akane Nakai were determined, and the effect of mordanting method on dye uptake and color fastness of the dyed fabric was investigated. The optimum temperature to extract Rubia akane Nakai was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 8$0^{\circ}C$, 1hour. The silk fabrics dyed with purpurin appeared red color, with alizarine appeared yellow-brown and with Rubia akane Nakai appeared yellow orange. K/S value of the dyeing fabrics was increased by pre-mordanting treatment. Mordant as Sn and Fe was better than anything else in K/S value. Mordanting treatment method affected color change of the dyed silk. In the case of Rubia akane Ntkai light fastness was increased by Fe and Al mordant treatment, Perspiration fastness of Rubia akane Nakai appeared more than 3 grades geneally. Fastness of abrasion and dry-cleaning appeared mon than 4～5 grades and these fastness improvement were generally effective for post-mordanting treatment.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.579-590
• /
• 2004

This research was aimed to investigate and compare the effectiveness of TLC and GC-MS methods in the analysis of chromophoric substances extracted from madder plant. Alizarin and purpurin 0.3% solution were used as comparative standards; madder extraction was prepared by heating the solution of powdered madder at 80℃, pH 1.5, for 90 min. Best elution solvent for TLC in silica gel plate was toluene:ethyl acetate=9:1, which resulted in red and yellow spots from madder extraction each of which showed R/sub f/ values 0.32-0.43 and 0.07-0.11. Although the red spot in particular exhibited similar characteristics as standard purpurin in color, shape, and R/sub f/ values, the result was inconsistent throughout different TLC trials. GC-MS analysis showed only small amount of alizarin and no purpurin in the madder extraction. Other chromophoric substance such as 2-furancarboxaldehyde, 5-(hydroxymethyl)-, anthralin, and danthron were also detected in small amounts. The result indicated that TLC was less sensitive to detecting and identifying the natural dyestuff which is generally constituted with a number of similar but chemically different chromophoric substances.