• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.297-297
• /
• 2011

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.279-279
• /
• 2011

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.216-216
• /
• 2009

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.269-271
• /
• 2007

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.115-116
• /
• 2008

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.259-259
• /
• 2012

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2010

Bending fatigue of aluminium alloy was characterized by acoustic nonlinearity of narrow band laser-generated surface wave. The higher harmonic components generated intrinsically by arrayed line laser beam were analyzed theoretically and acoustic nonlinearity was measured successfully on the surface of fatigue damaged aluminium 6061 alloy. The acoustic nonlinearity increased as a function of fatigue cycles and has close relation with damage level. Consequently, the nonlinear acoustic technique of laser-generated surface wave could be potential to characterize surface damages subjected to fatigue.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.16-23
• /
• 2021

Pin-to-disc wear testing experiments were conducted to investigate the wear characteristics of commercial oil (5W-40) with nano-diamond particles. The upper specimen was a SUJ-2 high-carbon chromium steel ball with a diameter of 4 mm, and the lower specimen was made of the Al-6061 alloy. The applied load was 5 N, and the sliding speed was 0.25 m/s. The wear tests were conducted at a sliding distance of 500 m. The friction coefficients and wear rates of the Al-6061 specimens were tested using commercial oil with different nano-diamond concentrations ranging from 0 to 0.02 wt.%. The addition of nano-diamond particles to commercial oil reduced both the wear rate and coefficient of friction of the Al-6061 alloy. The use of nano-diamond particles as a solid additive in oil lubricants was found to improve the tribological behavior of the Al-6061 alloy. For the Al-6061 alloy, the optimal concentration was found to be 0.005 wt.% in view of the friction coefficient and wear rate. Further investigation is needed to determine the optimal concentration of nano-diamond particles for various loadings, sliding speeds, oil temperatures, and sliding distances.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1027-1034
• /
• 2016

In this research, experimental study about size effect of solid particles on erosion resistance is presented. A high-density polyethylene particle with a mm-sized diameter is accelerated using a two-stage light gas gun up to Mach number of approximately 3.0. An accelerated particle impacts aluminum alloy such as Al1050 and Al6061 T6, and infrared windows such as ZnS and sapphire specimens. For the aluminum alloy, craters that form on the surface of the specimens are measured to characterize the erosion resistance of the material. For the infrared windows, repetitive tests are conducted until a linear or circumferential crack is found to create damage threshold curves that define a material's erosive resistance. From the comparison of test data for various sizes of high-density polyethylene particles, it is found that erosion resistance of material is linearly dependent on the size of particles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.191.1-191.1
• /
• 2016

본 연구에서는 알루미늄 합금의 PEO(Plasma Electrolytic Oxidation) 피막 형성 거동을 PEO 처리 용액 조성, 온도 및 합금 성분에 따른 전압-시간 곡선을 관찰하여 분석하였다. 알루미늄 합금의 PEO 피막 형성거동은 NaOH 농도, 전해질 온도, 인가 전류밀도 및 합금성분에 따라 다양하게 나타났다. 본 연구에서는 직류 정전류법을 이용하여 Al1050, Al5052, Al6061 합금 표면에 PEO 피막을 형성시켰으며, PEO 피막의 형성이 시작되는 전압 및 발생된 아크의 크기 및 모양을 관찰하여 PEO 피막 형성 거동을 연구하였다. 연구결과 PEO 처리 중의 전해액의 온도가 낮고 전류밀도가 높을수록 시편 표면에서 짧은 시간 내에 아크가 발생하였으며, 전압-시간 곡선은 빠른 속도로 PEO 피막생성 전압에 도달하여 유지되는 거동을 보였다. 동일한 용액조성, 용액온도, 용액 교반속도 및 인가전류밀도에서 관찰된 PEO 피막 형성 거동은 동일시편을 PEO코팅 후 에칭하여 반복 실험할 경우에도 큰 편차를 보였으며, 이로부터 시편의 조성이나 불순물의 존재 등이 크게 영향을 주는 것을 알 수 있었다.