• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.15-15
• /
• 2011

본 연구는 기존의 하우스 랩이 가지는 방풍, 방수 기능 외에 복사열 차단성, 열반사성, 통기성, 투습성, 난연성, 방수성 및 단열성 등의 다기능성이 발현되는 우수한 건축용 하우스 랩을 제조하는 목적으로 시스-코어 섬유로 이루어진 부직포층, 통기성 합성수지 필름층, 니들펀칭 복합 부직포층 및 고분자 필름이 일면 또는 양면에 코팅된 내식성 알루미늄 필름층이 순차적으로 적층되고 핫-멜트 라미네이팅에 의하여 합지 된 다기능성 하우스 랩 및 그의 따른 제조방법에 관한 것이다. 상기 니들펀칭 부직포 내부에 포함 된 아라미드 섬유에 의해 우수한 난연효과를 가지며, 통기성 필름에 의하여 투습방수 기능을 가질 수 있으며, 니들펀칭 부직포층에 다량의 공기가 함유되어 보온성이 우수하고, 내식성 알루미늄 필름층이 가진 빛에 대해 우수한 방사성으로 복사열을 차단하여 단열효과를 나타내는 하우스 랩을 제조하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.971-976
• /
• 2002

Effect of storage temperature and packing method on the changes in pH, acidity, the levels of lactic acid bacteria, volume expansion of packages and the colorness during the fermentation of kakdugi (diced radish kimchi) were investigated. The fermentation characteristics were greatly influenced by the temperature. The pH of kakdugi fermented at 15$^{\circ}C$ was 4.10 at 3 days, while the pH of kakdugi fermented at $0^{\circ}C$ was 4.03 at 18 days. The acidity of kakdugi fermented at $0^{\circ}C$ very slowly increased compared to that of the kakdugi fermented at 15$^{\circ}C$, 1$0^{\circ}C$ or 5$^{\circ}C$. The required days to reach the acidity of 0.6% (optimally ripened state) were 6 days at 15$^{\circ}C$, 7 days at 1$0^{\circ}C$, 18 days at 5$^{\circ}C$ and 30 days at $0^{\circ}C$. Despite of different fermentation temperature, the numbers of Leuconostoc sp. in optimally ripened kakdugi were similar. However, Lactobacillus sp. in kakdugi fermented at $0^{\circ}C$ was the smallest in number. Also, the volume expansion of aluminum pack was the lowest in kakdugi fermented at $0^{\circ}C$. Both pH and acidity of the kakdugi fermented in different packing condition did not show any difference at 1$0^{\circ}C$ for 20 days, however, the color of the kakdugi was affected by a packing method. Aluminium laminate package in which Ca(OH)$_2$ Pack stuck inside resulted in decolorization of kakdugi compared with aluminum package without Ca(OH)$_2$ pack or plastic jar. It showed the lowest redness and the highest lightness and yellowness. These results indicated that fermentation at $0^{\circ}C$ could increase storage period of kakdugi with minimum growth of Lactobacillus sp., and plastic jar might relieve the problem of volume expansion and decolorization of kakdugi.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.125-129
• /
• 2008

Rechargeable lithium-ion polymer batteries have been considered to be next-generation power sources for portable electronic devices and electric vehicles. In this work, we tried to improve the cycling performances of lithium-ion polymer cells by coating aluminum fluoride and acrylonitrile-methyl methacrylate copolymer to the polyethylene separator. It was found that the addition of aluminum fluoride to the surface-modified separator reduced the interfacial resistances and thus the cell exhibited a less capacity fading and better high rate performance. The cell showed an initial discharge capacity of 150 mAh/g and good capacity retention at 0.5 C rate.

• Composites Research
• /
• v.36 no.3
• /
• pp.224-229
• /
• 2023

Due to the increasing demand for wearable devices and miniaturization of various electronic devices, the trend of nanofabrication in IT devices is underway. In order to overcome the limitations of battery size and capacity, there has been a lot of research interest in energy harvesting technology, also known as triboelectric nanogenerator. AAO(Anodic Aluminum oxide) coated with fluoride is a structure that includes an anode layer with high properties in the triboelectric series, an dielectric layer that helps transfer the triboelectrically generated charges to the electrode without loss, and the electrode. For these reasons, AAO has been a lot of research on its application to frictional energy harvesting nanogenerators. In this work, we analyzed the correlation of AAO between the surface morphology and thickness of the insulating layer by utilizing aluminum oxide, which is advantageous for the application of triboelectric nanogenerators, and adjusting the thickness of the insulating layer.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2004

The extraction of platinum group metals such as Pt, Pd and Rh from spent automobile catalyst has been investigated by leaching in HCl solutions using $HNO_3$ or NaOCl as a oxidant. The effect of type and amount of oxidant, reaction time and pulp density on the extraction of platinum group metals was examined. Platinum group metals were recovered by the cementation method using aluminum as a reducing agent. The extraction ratio was higher when NaOCl was used as a oxidant. The optimum leaching conditions were obtained to be: HCl 8 M, the amount of NaOCl 1.4 mole, leaching temperature $90^{\circ}C$, leaching time 180 minutes, pulp density 400g/L. Under the optimum conditions, the extraction of Pt, Pd and Rh were 96.1%, 93.6% and 77.3%, respectively. With the addition of 2.0g of aluminum which corresponds to 28 equivalent the reduction were 98% for Pt. 98.8% for Pd and 65.3% for Rh, respectively.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.321-325
• /
• 1989

Storage quality dried persimmons was evaluated by 5 scale scoring hedonic sensory analysis in various packaging methods and materials. Dried persimmons were deteriorated within 1 months of storage in polyethyene(PE, 0.08mm) and 1.5-2.5 months in nylon(PA/PE, 0.1mm) packages at room temperature, But those were kept good quality for 5 months of storage in PA/PE package and for 8 months in $CO_2$ or $N_2$ gas filled polyester/aluminum/casteded polypropylene(PET/Al./CPP, 0.1mm) package at $5^{\circ}C$. Dried persimmon had the best quality in water content of 37% and at humidity 75% and its shelf-life was noticialy prolonged by low temperature.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.30-33
• /
• 2005

Although extruded aluminium bumper beam has been commonly used in advanced car makers, there are not so much precedent for it's localization. For the localization of aluminum bumper beam of 7XXX series, benchmarking, material modifications of 7XXX series aluminum alloy, section design of beam, impact analysis had been performed in this study. High fuel efficiency and weight reduction could be achieved by using aluminum bumper beam of which the weight is lighter than that of steel. Moreover, it is expected to reach higher recycling rate by substituting aluminum for steel.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.34-37
• /
• 2005

While all-aluminum front end carriers have been frequently used by major foreign auto-makers, the carriers domestically produced are typically hybrid types. It is understood that higher fuel efficiency due to weight reduction can be achieved by using aluminum carriers because of aluminum's light weight. Moreover, aluminum is expected to posess high corrosion resistance and recyling rate. As a first step to enhance feasibility of domestic production of all-aluminum carriers, several carriers made by advanced auto makers are examined and compared. Besides basic characteristics such as appearance and weight, physical properties including composition, strength and elongation are carefully analyzed to obtain critical design and process factors.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.98-101
• /
• 2003

폴리머 수용액인 점탄성 유체속에서 물체를 떨어뜨리면 시간 간격에 따라 종말속도가 다르게 측정된다. 이는 폴리머 수용액이 점성과 탄성을 포함하고 있는 것으로 수용액 내부에서 처음 통과한 물체를 기억하는 기억유체(memory fluid)라고 정의 할 수도 있다. 낙하에 사용된 물체는 속이 빈 알루미늄 구를 사용하였으며 구 내부에 일정량의 철분을 삽입하여 밀도를 변화시켰다. 이 결과 구를 떨어뜨리는 시간 간격이 작을수록 종말속도 값은 크게 나타나며 시간 간격이 충분히 크면 처음 구를 떨어뜨릴 때의 종말속도와 같게 된다. 또한, 농도가 증가할수록 처음 구를 떨어뜨려 측정된 종말속도는 서서히 감소하다가 측정시간간격의 85％를 통과하며 다시 처음의 속도에 도달하게 된다. 구의 종말속도는 점탄성 유체의 농도가 각각 500wppm, 1000wppm, 2000wppm의 경우 처음 구를 떨어뜨린 후에 구의 밀도와 온도변화에 따라 최고속도에 도달하는 시간도 증가하였으며, 시간이 경과할수록 감소하여 일정시간이 경과한 후에는 처음의 상태로 복귀되는 것을 알 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.64.2-64.2
• /
• 2011

해상용(offshore) 부이(bouy)는 선박의 항로를 지시하거나 암초, 침몰선 등 항해상의 위험물을 알리기 위해 사용 되며, 야간을 위해 등화장치를 설치한 것을 등부표라 한다. 등부표는 야간 점등을 위해 자체 전력 생산시스템을 갖추고 있으나, 기존의 태양광을 이용한 전력 시스템은 해상 환경에 따른 제약이 많아 안정적인 운영이 어려우므로 풍력 발전기(wind turbine)를 이용한 하이브리드 전력 생산시스템으로의 전환이 필요한 실정이다. 선행 연구는 수직축(vertical axis) 양력(lift) 및 항력(drag) 조합형 해상용 풍력발전기 개발에 대하여 수행하였으나, 본 논문에서는 풍력발전기의 효율 증대를 위해 날개 길이 및 후면부 절개 비율에 따른 수직축 풍력발전기 특성에 대하여 연구하였다. 풍력발전기의 설치조건은 선행연구와 동일하게 등명구 교체 작업을 원활하게 하기 위하여 설치 공간을 $1m{\times}1m$로 제한하였으며, 등부표의 구조를 고려하여 최상단에 지지 프레임을 별도로 구성 하였다. 풍력발전기의 블레이드는 0.6mm의 알루미늄 박판을 절곡하여 NACA 4418의 외형을 가지도록 제작하였고, 블레이드 설계 시 에어포일의 후면부를 절개하여 양력과 항력을 효과적으로 이용하며 저속과 고속에서 높은 효율을 가지도록 설계하였다. 또한 블레이드 날개 길이와 후면부 절개 비율에 따른 풍력발전기 특성을 실험을 통해 비교하여 기준 해상 풍속에서 블레이드 설계 최적화를 수행하였으며 비교 모델 대비 약32% 발전량이 증가한 설계변수 조합을 구하였다.