• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.107-108
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.05a
• /
• pp.221-222
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.303-304
• /
• 2011

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.41-46
• /
• 2005

Waste aluminum dross is a major waste in the aluminum scrap smelters and its major components are alumina and metallic aluminum. In this study, waste aluminum dross was leached with sodium hydroxide solution to extract the remained aluminum into the solution, and aluminum hydroxide was recovered from the leached solution. The dross residue generated at the leaching step was recycled into alumina base ceramic materials through a series of treatments such as washing, drying and roasting. Also, a pilot plant was constructed and tested to demonstrate the developed technology. Four tons of waste aluminum dross could be processed per day. From the test run of the pilot plant, it was confirmed that the developed technology could be applied to commercialization.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.20
• /
• pp.18-28
• /
• 2005

연안소형어선에 주로 사용하는 FRP선질은 가볍고 강도는 우수하나 인화성이 높아서 기관실 화재사고 등 위험에 노출되어 있고 선박 제작 과정에서 인체에 해로운 유해성분이 발생할 뿐만 아니라, 폐선의 경우 산업폐기물로써 환경오염에 큰 영향을 미치고 있다. 그런 반면에, 알루미늄합금 어선은 FRP 어선의 단점을 보완할수 있는 재료로써, 고강도 경량화의 효과를 낼 수 있고, RFP어선보다 인화성이 낮아서 열에 강하고 내구성이 높고 강선보다 해수의 부식방지에 뛰어나므로 알룸늄어선의 개발이 요구되고 있다. 이번 호에서는 알루미늄선박 건조시 각각의 단위공정에 대한 작업방법, 작업순서 및 주의사항 등 표준에 대해 코리아타코마조선공법(주)의 알루미늄선박 작업지침과 KSB 0897(불황가스 및 아크용접 작업표준)를 일부 발췌하여 기술하고자 한다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.194-195
• /
• 2005

방사선관리구역 내에서 발생되는 많은 양(발전소별 연간 약$100{\sim}700$개 정도)의 사용 후 공기정화 필터는 고체 폐기물 드럼의 단면적 보다 넓어 별도로 필터를 압축하거나 분해 작업 없이는 폐기물로 직접 처리가 곤란하다. 처리 시 많은 양의 분진이 발생하여 작업자의 내부피폭 가능성 및 많은 양의 고체 폐기물이 발생할 수 있는 잠재성이 있어 시료분석 결과 오염된 필터 내지는 바로 드럼 처리하여 내부 피폭 가능성을 미연에 방지하고 필터 프레임은 재사용을 유도하여 폐기물 저감화, 작업환경 개선 및 경제적인 이익을 창출할 수 있다. 영광 3발전소와 울진 3발전소의 경우 타 발전소에 비해 방사선관리구역 내 공기정화 처리기의 설치수량이 많아(약 700개/년) 공기정화필터가 매년 다수 발생되고 있으며, 이를 전량 드럼 처리 시 고체폐기물 드럼이 더 발생하게 되어 영구처분비용의 증가를 초래하게 된다. 발전소 전체적으로는 약 3,500개/년의 폐필터가 발생되고 있다. 이렇게 발생되는 공기정화필터의 프레임을 재사용함으로써 그 효과는 1) 알루미늄을 포함한 유리섬유를 드럼처리 시 고체방사성 폐기물드럼 생성량 감소 2) 프레임 재사용으로 인한 예산절감 효과 3) 폐필터 분해작업 시 분진에 의한 작업자 체내${\cdot}$외 피폭방지와 작업장 오염 확산 방지 및 환경 개선 4) 작업시간 단축 및 소요인력 감소 효과를 볼 수 있다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.3
• /
• pp.74-81
• /
• 2013

In this study, the separation efficiency of wind power selector (the direction of the air flow of the air to perform gravity separation method) of municipal solid waste which was landfilled was investigated to reduce amount of waste that is designed to increase the recycling rate of wastes for the ANSYS CFX Program's numerical methods with wind through the separator. When a suction device designed to suction 1000mL of a plastic bag, the separation efficiency was 100% and when the wind speed was 0.9 m /sec or more and when the wind speed was 1.6 m / sec or more, the efficiency of plastic bottles in a mixture of 500mL and 1500mL plastic bottle waste was 100% and the aluminum screening efficiency of 250mL aluminum can was 100 % when the wind speed was 2.3 m / sec. In the last, 5mm thick compressed aluminum can efficiency was 90 % when the wind speed was 2.4 m / sec.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.50-57
• /
• 2004

Waste aluminum dross is a major waste in the aluminum scrap smelters and its components are mostly alumina and remained metallic aluminum. In the process to extract the remained aluminum from the waste dross by leaching with sodium hydroxide solution, residue is generated and its main component is alumina. This residue could be recycled into ceramic materials such as alumina castable refractories by going through a series of treatments such as washing, drying and roasting. In this study, a pilot plant was constructed and tested to demonstrate the developed technology. One thousand tons of waste aluminum dross could be processed, and about seven hundred tons of ceramic materials produced in the demonstration line. From the test run of the pilot plant, although it was confirmed that the developed technology could be applied to commercialization, several technical improvements were found to be necessary for reducing impurities such as Na, Fe and for reforming drying equipment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.127-137
• /
• 2019

Zr electrorefining is demonstrated herein using Zirlo tubes in a chloride-fluoride mixed molten salt in the presence of $AlF_3$. Cyclic voltammetry reveals a monotonic shift in the onset of metal reduction kinetics towards positive potential and an increase in intensity of the additional peaks associated with Zr-Al alloy formation with increasing $AlF_3$ concentration. Unlike the galvanostatic deposition mode, a radial plate-type Zr growth is evident at the top surface of the salt during Zr electrorefining at a constant potential of -1.2 V. The diameter of the plate-type Zr deposit gradually increases with increasing $AlF_3$ concentration. Scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) analyses for the plate-type Zr deposit show that trace amount of Al is incorporated as Zr-Al alloys with different chemical compositions between the top and bottom surface of the deposit. Addition of $AlF_3$ is effective in lowering the residual salt content in the deposit and in improving the current efficiency for Zr recovery.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.13-18
• /
• 2010

Effort of reducing wastes and their recycling is increasing in worldwide. Especially, extreme care for alkali recycling is required because of its environmental pollution and its corrosive characteristics. In order to manage alkali wastes effectively, it is necessary to make quality standards for recycling products from the alkali wastes because there are no quality specifications yet. In this study, we selected several recycling candidates from the alkali wastes based on the analysis of the most recent data of the various industrial sites. As a result, the recycling candidates from the alkali wastes are sodium hydroxide, aluminum sulfate, poly aluminum chloride. It is believed that the proper management system for waste products is required in governmental point of view and it propagates positively for resolving various environmental issues.