• 보존과학연구
• /
• s.36
• /
• pp.49-63
• /
• 2015

In this study, the annual and seasonal concentrations of aldehydes was measured using the active type and passive type method in the temporary exhibition hall and outdoor air. It was compared with the correlation between the methods according the comparison of methods to measured concentrations. As a results, the ${\Sigma}$ aldehydes in exhibition hall by the active type was higher than 6.4 times by passive type. The formaldehyde was exceeded standards in exhibition facilities of the Ministry of Environment. It was the highest concentrations in summer. Annual I/O ratio of formaldehyde was 5.4 and acetaldehyde was 1.9, it was confirmed that a large amount occurs in the temporary exhibition hall. The results of the correlation coefficient and the t-test of formaldehyde were a strong positive linear relationship between the active type and the passive type.

• Clean Technology
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2005

In this paper we prepared dextrin dialdehyde (DAS) of a different oxidation ratio (aldehyde content) and examined their properties and discussed their tanning mechanism. DAS was produced by reacting dextrin in aqueous medium with periodate ion used in a molar ratio between periodate and glucose of 0.3 to 1.0 at a temperature of 20 to $45^{\circ}C$. Since DAS reacts with amino group, DAS may have tanning property of aldehyde tanning agent (formaldehyde, glutaraldehyde).

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.438-446
• /
• 1999

The optimum analytical method of aldehydes, ozone by-products, was established by reverse phase liquid chromatography. Six aldehydes including formaldehyde, acetaldehyde, acrolein, propionaldehyde, butylaldehyde and benzaldehyde, and one ketone including acetone were selected as aldehyde test samples through preliminary experiments. Such analytical conditions as the pH of citrate buffer solution, reaction temperature, reaction time, and concentration of DNPH, the component and composition of desorption solvent were optimized. As the result, pH 3.0 of citrate buffer solution, 40$^{\circ}C$ of reaction temperature, 15 minutes of reaction time, and 0.012% of DNPH concentration were chosen as optimum conditions. Aldehydes-DNPH derivatives in water were concentrated on $C_18$ Sep-Pak cartridge and followed by elution of their derivatives fraction with THF/ACN(70/30) mixture, and showed recoveries of the range from 87 to 107%. Separation condition on Nova-Pak $C_18$ column with low pressure gradient elution from ACN/MeOH/water(30/10/60) of an initial condition to 80% ACN of a final condition was found to give a good resolution within 20 minutes of run time. 86% to 103% of recovery for aldehydes using this method was similar to that for aldehyde using EPA Method 554 which is ranged from 84% to 103%.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.105-107
• /
• 2000

지금까지 국내외적으로 도심지역의 대기질 평가에 관한 연구로서 알데하이드의 분석은 상당히 많은 관심의 대상이 되어왔다. 광화학스모그의 전조물질로 널리 알려진 알데하이드는 대기중의 탄화수소가 광화학적으로 산화반응을 일으킬 때 형성되고 대기중의 라디칼의 주요 원천이며 유기 에어로졸 형성에도 크게 관여한다 대도시 지역에서는 공장굴뚝에서 방출되는 매연, 자동차의 배기가스가 알데하이드의 주요 인위적인 배출원으로 알려져 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.87-88
• /
• 2003

포름알데하이드는 오염된 혹은 깨끗한 대기 환경에서 편재하는 오염물질이다. 일반적으로 깨끗한 대기 환경에서 수 ppt의 농도로 존재하지만 오염도가 높은 도시지역에서 여름철 심한 스모그 현상이 일어나면 수십 ppb의 농도를 보이기도 한다. 포름알데하이드는 1차 혹은 2차 대기오염물질이고, 탄화수소의 광화학 반응의 중간 생성물로써 포름알데하이드는 도시지역에서의 광화학 반응의 오염물질의 형성에 기여한다. 따라서 포름알데하이드의 측정은 CO의 지구적 수지(budget)와 다양한 대기 반응 물질 사이의 수지와 회전(cycling)을 이해하고 대류권의 광화학모델을 증명하는데 중요하다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1527-1532
• /
• 2013

The kinetics of photocatalytic degradation of gaseous acetaldehyde and methylethylketone(MEK) were studied by the batch scale of photo-reactor. Variable parameters were initial concentration of acetaldehyde and MEK, water vapor content, and temperature. The photocatalytic degradation rate was increased with increasing concentration of acetaldehyde and MEK, but maintained gentle increase beyond a certain concentration. The Langmuir-Hinselwood model was successfully applied to correlate experimental data. Water vapor inhibited the degradation reaction of acetaldehyde and MEK. The optimum reaction temperature was $45^{\circ}C$ for acetaldehyde and MEK.

• Clean Technology
• /
• v.27 no.4
• /
• pp.325-331
• /
• 2021

In this study, bio-carbons were produced by activation process from unused biomass (Grade 3 wood pellet and spent coffee grounds) to determine the removal performance of formaldehyde and acetaldehyde. The activation experiments were conducted in a fixed bed reactor using CO₂ as an activation agent. The temperature of the activation reactor and input of CO₂ were 900 ℃ and 1 L min^-1 for all the experiments. The maximum BET surface area of about 788 m² g^-1 was obtained for bio-carbon produced from Grade 1 wood pellet, whereas about 544 m² g^-1 was achieved with bio-carbon produced from spent coffee grounds. In all the experiments, the bio-carbons produced were mainly found to have micro-porous nature. A lower ash amount in raw material was favored for the high surface area of bio-carbons. In the removal test of formaldehyde and acetaldehyde, the bio-carbon produced from spent coffee grounds showed excellent adsorption performance compared with woody biomass (Grade 1 wood pellet and Grade 3 wood pellet). In addition, the comparative experiment of commercial impregnated activated carbon and bio-carbon produced from spent coffee grounds was conducted. In terms of formaldehyde removal performance, the commercial impregnated bio-carbon was excellent, while bio-carbon produced from spent coffee grounds was excellent in acetaldehyde removal.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.57-64
• /
• 2003

Small cherry specimens modified with acetic anhydride and formaldehyde vapor phase were weathered by outdoor exposure and accelerated conditioning in a climate chamber. The effects of the chemical modification were evaluated by measuring their weight percentage gains (WPG), hygroscopicity and color differences before and after weathering. The average WPGs of the 72 hour acetylated and formaldehyde-treated specimens were 8.1 and 15.7%, respectively. After outdoor exposure for more than 2 months, the acetylated specimens lost weights by only 1.5%, but the formaldehyde-treated did much more than the formers. It was revealed that acetylation reduced the hygroscopicity and discoloration of wood while formaldehyde treatment didn't. Moreover the longer is the formaldehyde treatment time the more degraded after weathering. It was concluded that the vapor-phase acetylation could be applied for improving the dimensional stability of old wooden blocks.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.319-329
• /
• 2017

In this study, formaldehyde concentrations in two exhibition halls were monitored using a passive sampler from May 2012 to April 2013. Formaldehyde concentrations in the exhibition halls were 5 to 36 times higher than concentrations outdoors. Concentrations inside the exhibition room and showcase varied according to pollutant source, HVAC(heating, ventilation, air conditioning)system and environment management. The formaldehyde concentration levels were corrected according to a standard method prescribed by Indoor Air Quality Management Law of the Ministry of Environment, Korea. As a result, Most concentration levels exceeded the exhibition standard of the Ministry of Environment($100{\mu}g/m^3$) and artifacts conservation standard of Tokyo National Museum($50{\mu}g/m^3$). Seasonal concentrations in the exhibition room and showcase were in the order summer>fall>spring>winter. Formaldehyde emissions increased in summer when air temperature and relative humidity are both high. Formaldehyde concentration distribution according to the temperature and relative humidity showed positive correlation. Air temperature showed good correlation because $R^2$ was in the range of 0.8~0.9. Analysis of formaldehyde emission characteristics in the exhibition hall would be helpful in efforts to improve indoor air quality.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2017

Formaldehyde is one of the toxic substances without any color and smell. Several methods to remove formaldehyde has been investigated up to now. Here, both the enzymatic and chemisorptive/catalytic liquid phase formaldehyde removal were investigated, and their catalytic activities in terms of specific activities were compared. Firstly, formaldehyde dehydrogenase (FDH) enzyme from Escherichia coli K12 was cloned, and expressed in Escherichia coli BL21(DE3). And the catalytic activity was characterized as $2.49{\times}10^3sec^{-1}mM^{-1}$ of $k_{cat}/K_m$ with 8.69 U/mg of the specific activity. Secondly, the chemisorptive and oxidative catalytic removals were investigated simultaneously. Activated carbons and zeolites treated with heat, KI, and KOH were used as chemisorption medium. And $Pd/TiO_2$ was used as an oxidative catalyst for the formaldehyde removal. All of the tested chemicals showed similar formaldehyde removal efficiencies of around 50%. However, the specific activity of FDH dependent formaldehyde removal was absolutely higher than that of using chemisorptive and catalytic removal processes with the ranges of 0.01 to 0.26 U/g.