• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1027-1029
• /
• 2002

UPFC(Unified Power Flow Controller)는 계통의 선로로 전송되는 무효전력과 유효전력을 독립적으로 보상해줄 수 있는 유연송전시스템 기기로, 전력계통 전압 안정화와 위상제어 둥의 목적으로 실용성과 적용성이 뛰어나므로 최근 들어 국내외에서 활발하게 연구 되고 있다. 본 논문에서는 회로 DQ 변환 기법을 적용하여 UPFC를 모델링하고 동작특성 해석한다. 회로 DQ 변환의 결과 정특성 및 동특성을 나타낸는 등가회로를 구할 수 있으며 이로부터 각종 특성식과 설계식을 도출해 낸다. 또한, 제안된 모델링 및 동작특성 해석의 결과의 타당성은 PSIM 시뮬레이션을 통하여 검증한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.209-220
• /
• 2019

Even though the scale of hard structures for beach stabilization should carefully be determined such that these structures do not interrupt the great yearly circulation process of beach sediment in which the self-healing ability of natural beach takes places, massive hard structures such as the submerged breakwater of wide-width are frequently deployed as the beach stabilization measures. On this rationale, asymmetric ripple mat by Irie et al. (1994) can be the alternatives for beach stabilization due to its small scale to replace the preferred submerged breaker of wide-width. The effectiveness of asymmetric ripple mat is determined by how effectively the vortices enforced at the contraction part of flow area over the mat traps the sediment moving toward the offshore by the run-down. In order to verify this hypothesis, we carry out the numerical simulations based on the Navier-Stokes equation and the physically-based morphology model. Numerical results show that the asymmetric ripple mat effectively capture the sediment by forced vortex enforced at the apex of asymmetric ripple mat, and bring these trapped sediments back to the beach, which has been regarded to be the driving mechanism of beach stabilization effect of asymmetric ripple mat.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.330-340
• /
• 2009

A naval shipboard inevitably movies in a pitch and roll direction under the influence of wave and wind in the sea. As a result, the shipboard gets in a continuous turning motion back/front and right/left. And the shipboard is also constantly exposed to many different kinds of disturbance signals including the vibrations of various frequencies from the internal equipments and their vibrations, strong waves, and impact from explosion. This paper formulates multi-body dynamic models similar to an actual system and simulates the pitch/roll positions of a 2-axes gimbals with PI controller for consecutive behavior of a naval shipboard including disturbance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.409-415
• /
• 2011

A gimbal system in observation reconnaissance aircraft was fabricated by assembling many parts and bearings. This system consists of a camera module and a stabilization gimbal that supports the camera module. During the flight for recording images, the gimbal system experiences various accelerations with wide frequencies. Although base excitation of stabilization gimbal results in vibration of the camera module, the camera module must be able to capture the correct and clear image even while vibrating. Hence, it is important to know the natural frequencies and vibration modes of the gimbal system with the camera module. Considering bearings as spring elements, the vibration characteristic of the gimbal system was analyzed by finite element method. In addition, harmonic response analysis was performed to determine the correct transmissibility of acceleration for the camera module in the frequency range of 0-500 Hz.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.851-856
• /
• 2013

Recently, as the tactical environment has changedto one of network-centric warfare, where all components are connected through a network, much emphasis has been placed on the use of an artificial satellite for achieving high communication speeds. To provide a high-quality artificial satellite link, stabilization is very important in a platform. Previous stabilization control techniques used PI control, which is commonly used for vessels. However, for ground terminals that require a higher communication speed, the antenna should move faster to track an artificial satellite within a short period of time. Moreover, the terminals must be equipped with proper sensors and algorithms so that they can detect and compensate for external disturbances while tracking the artificial satellite. In this study, through the analysis of the dynamic model of an antenna system, a stabilization algorithm for ground terminals was proposed;this algorithm shows high isolation performance in the low-frequency range and includes $PI^2$ control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.104-112
• /
• 2002

In this paper, it is suggested that the selection method of parameter of Power System Stabilizer(PSS) with robustness in low frequency oscillation for Thyristor Controlled Series Capacitor(TCSC) using Geletic Algorithm(GA). A TCSC meddle consists of a stories capacitor and a parallel path with a thyristor valve and a series inductor. Also in in parallel, as is typical with series capacitor applications, is a metal-oxide varistor(MOV) for overvoltage protection. The proposed PSS parameters are optimized using GA in order to maintain optimal operation of TCSC which is expected to be applied in transmission system to achieve a number of benefits under the various operating conditions. In order to verify the robustness of the proposed method, we considered the dynamic response of angular velocity deviation and terminal voltage deviation under a power fluctuation and rotor angle variation.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.27-40
• /
• 2021

The construction method to prevent the frost heave or thaw settlement is called the ground stabilization method, and the thermo-syphon is one of the typical ground stabilization methods. The thermo-syphon has recently been developed with a simple analysis model and thermal analysis has been carried out, but the frost heave of frost susceptible soil was not considered. This study was conducted using ABAQUS internal user subroutine to develop the numerical analysis model (Coupled thermo-mechanical) that can simultaneously perform thermal analysis for the temperature change of the soil according to the thermo-syphon and structural analysis to predict the frost heave of the soil accordingly. As a result of the numerical analysis, the frost heave of the soil decreased as the performance of the thermo-syphon increased. As for the main results, when the thermo-syphon which has contain 25%, 50%, and 100% of refrigerant filling ratio was applied, the reduction ratio of the frost heave was 5.5%, 14.4%, and 21% respectively.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1996.03a
• /
• pp.55-72
• /
• 1996

암반사면의 안정성은 암반내에 발달된 불연속면의 기하학적 속성과 강도정수에 크게 영향을 받으며, 사면방향에 대한 불연속면들의 상대적인 방향성들은 구조적으로 발생 가능한 붕괴양상을 결정하게 된다. 불연속면을 따라 미끄러짐이 발생하는 암반사면의 불안정성 분석에는 결정론적인 해석(deterministic analysis)과 확률론적인 해석(probabilistic analysis)들을 포함하여 수많은 방법들이 이용되고 있다. (중략)

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.39-40
• /
• 2007

본 논문은 Slotless BLDCM의 발열특성에 고려하여 열 발생을 최소화 하고자 다중 반응표면법을 적용하여 모터의 형상 및 권선 사양의 최적 선정에 관한 연구이다. 본 연구에서는 전류밀도의 최소화를 목적함수로 하여 형상 및 권선 사양의 최적화를 실시하였다. 변수에 대한 영향도의 분석은 전자계 해석을 통한 결과값을 통하여 실시하였으며, 열적 특성을 파악하기 위해서 전자계-열계의 해석을 통해서 최적값의 열적 안정성을 파악하였다.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.27-29
• /
• 2003

최근 레이저와 아크를 동시에 사용하여 용접 속도와 품질을 향상시킬 수 있는 하이브리드 용접 기술이 개발되어 활발히 연구가 진행되고 있다. 레이저와 아크를 동시에 사용하게 되면 각각의 열원이 서로 영향을 주어 새로운 용접 열원으로서 동작하게 되는데 특히 레이저에 의해서 발생하는 모재의 금속 증기는 아크 플라즈마의 안정화를 가져오는 것으로 알려져 있다. 또한 금속 증기 속의 이온과 전자가 아크 플라즈마의 음극점을 형성하는데 도움을 줌으로써 플라즈마의 국부적인 온도 상승을 가져오게 된다. 본 연구에서는 effective electrical potential 개념을 도입하여 이러한 현상을 해석하였고 용접 조건에 따른 플라즈마의 거동 변화를 시뮬레이션 하였다.