• Title/Summary/Keyword: 안정성해석

Search Result 3,670, Processing Time 0.041 seconds

Three-dimensional finite element analysis for stress distribution on the diameter of orthodontic mini-implants and insertion angle to the bone surface (교정용 미니임플랜트의 직경 및 식립각도에 따른 응력 분포에 관한 3차원 유한요소 분석)

  • Byoun, Na-Young;Nam, Eun-Hye;Kim, Il-Kyu;Yoon, Young-Ah
    • The korean journal of orthodontics
    • /
    • v.36 no.3 s.116
    • /
    • pp.178-187
    • /
    • 2006
  • The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of $15{\times}15{\times}20mm^3$ was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at $90^{\circ},\;75^{\circ},\;60^{\circ},\;45^{\circ},\;and\;30^{\circ}$ to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.

Relationships between Fishing Condition and Sea Surface Temperature for Skipjack(Euthynnus pelamis) Caught by Small Fishing Boats (소형어선에 의한 가다랑어 (Euthynnus pelamis)의 어황과 수온)

  • Jeong, Dong-Gun;Rho, Hong-Kil
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.10 no.1
    • /
    • pp.15-30
    • /
    • 1998
  • The variation of the catches of Skipjack(Euthynnus pelamis) and the relationships between the SST and the fishing ground is examined using the catches data of skipjack obtained by Iwawada Fisheries Cooperative of Chiba Prefecture in Japan from 1982 to 1988. The annual mean catch for Skipjack was 151,375.1kg. the annual fluctuation of catch was that the catch in 1984 was increasing, but it was decreased less than 50% in 1985, and was repeated after being a little recovered in 1986, and it was recovered with the level of 1984 in 1988. The fluctuation of catch for Skipjack in every fishing term is that daily mean catch of the primary fishing term (January, February and March) is 894.6kg, but the middle fishing term(April and May) more than four times of the primary fishing term is 3,666.0kg, the last fishing term(June and July) was decreasing at 767.9kg and the fishing ground gradually becomes extinct. The annual mean SST in fishing ground was an extent of from $19.0^{\circ}C$ to $20.2^{\circ}C$, the mean SST of every year except 1983 was from $19.0^{\circ}C$ to $19.9^{\circ}C$. It is said that the optimum SST of Skipjack in Sotobo sea area is the degree of $19.0^{\circ}C$. Therfore, the thing which will guess the time and the location appeared the optimum SST is the very important factor to operate efficiently. About the extent of SST in fishing ground, it was from $17.0^{\circ}C$ to $19.0^{\circ}C$ on March, from $17.5^{\circ}C$ to $20.5^{\circ}C$ on April and from $17.5^{\circ}C$ to $23.5^{\circ}C$ on May, which the extent of SST was gradually larger and larger, on June from $21.0^{\circ}C$ to $23.5^{\circ}C$, fishing ground was formed only the degree of SST more than $21.0^{\circ}C$.

  • PDF

Transition Metal Dichalcogenide Nanocatalyst for Solar-Driven Photoelectrochemical Water Splitting (전이금속 디칼코제나이드 나노촉매를 이용한 태양광 흡수 광화학적 물분해 연구)

  • Yoo, Jisun;Cha, Eunhee;Park, Jeunghee;Lim, Soo A
    • Journal of the Korean Electrochemical Society
    • /
    • v.23 no.2
    • /
    • pp.25-38
    • /
    • 2020
  • Photoelectrochemical water splitting has been considered as the most promising technology for generating hydrogen energy. Transition metal dichalcogenide (TMD) compounds have currently attracted tremendous attention due to their outstanding ability towards the catalytic water-splitting hydrogen evolution reaction (HER). Herein, we report the synthesis method of various transition metal dichalcogenide including MoS2, MoSe2, WS2, and WSe2 nanosheets as excellent catalysts for solar-driven photoelectrochemical (PEC) hydrogen evolution. Photocathodes were fabricated by growing the nanosheets directly onto Si nanowire (NW) arrays, with a thickness of 20 nm. The metal ion layers were formed by soaking the metal chloride ethanol solution and subsequent sulfurization or selenization produced the transition metal chalcogenide. They all exhibit excellent PEC performance in 0.5 M H2SO4; the photocurrent reaches to 20 mA cm-2 (at 0 V vs. RHE) and the onset potential is 0.2 V under AM1.5 condition. The quantum efficiency of hydrogen generation is avg. 90%. The stability of MoS2 and MoSe2 is 90% for 3h, which is higher than that (80%) of WS2 and WSe2. Detailed structure analysis using X-ray photoelectron spectroscopy for before/after HER reveals that the Si-WS2 and Si-WSe2 experience more oxidation of Si NWs than Si-MoS2 and Si-MoSe2. This can be explained by the less protection of Si NW surface by their flake shape morphology. The high catalytic activity of TMDs should be the main cause of this enhanced PEC performance, promising efficient water-splitting Si-based PEC cells.

Geochemistry of tourmalines in the Ilgwang Cu-W breccia-pipe deposit, Southeastern Gyeongsang Basin (경상남도 일광의 각력파이프형 구리(Cu)광상에서 산출되는 전기석의 지구화학)

  • 양경희;장주연
    • The Journal of the Petrological Society of Korea
    • /
    • v.11 no.3_4
    • /
    • pp.259-270
    • /
    • 2002
  • A small granodiorite-quartz monzonitic stock containing sericitic and propylitic alteration assemblages hosts a Cu-W breccia-pipe deposit in the southeastern Cyeongsang basin. The mineralized breccia-pipe contains angular to subangular brecciated fragments of granitic rocks showing clast-supported textures. An assemblage of quartz, tourmalines, sulfide minerals (mainly chalcopyrite, arsenopyrite and pyrrhotite) and calcite was precipitated as a hydrothermal cement between the brecciated fragments. A tourmaline aureole surrounds the breccia pipe. Extensive tourmalinization of the granitic rocks near and within the pipe and no tourmalinization in the sedimentary and volcanic rocks. The tourmalines are marked by Fe-rich, black charcoal-like schorl (80 mol% schorl relative) nearer the schorl-dravite solid solution. The chemical changes in the hydrothermal fluid are reflected by variations in compositional Boning from cores to rims. They generally contain cores with low values of Fe/(Fe+Mg) and high values of Na/(Na+ca) relative to rims. This is because of an increase Fe and Ca contents toward rims. The main trend of these variations is a combination of the exchange vectors Ca(Fe, Mg) $(NaAl)_{- }$ $_1$ and $Fe^{3}^{+}$ $Al_{[-10]}$ $_1$ It is thought that boiling causes the loss of $H_2$ into the vapor phase resulting in the oxidation of Fe in the aqueous phase. pH of the melt would be one of important controlling factors for the tourmaline stability. The tourmalines could be precipitated when the system evolved to the acidic hydrothermal regime as most hydrothermal brines and acidic gases exsolved from the magma. The Ilgwang tourmaline crystallization is products of hypogene orthomagmatic hydrothermal processes that were strongly pipe-controlled.

Geochemical Characterization of Rock-Water Interaction in Groundwater at the KURT Site (물 암석 반응을 고려한 KURT 지하수의 지구화학적 특성)

  • Ryu, Ji-Hun;Kwon, Jang-Soon;Kim, Geon-Young;Koh, Yong-Kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.10 no.3
    • /
    • pp.189-197
    • /
    • 2012
  • Geochemical composition of fracture filling minerals and groundwater was investigated to characterize geochemical characteristics of groundwater system at the KURT site. Minerals such as calcite, illite, laumontite, chlorite, epidote, montmorillonite, and kaolinite, as well as I/S mixed layer minerals were detected in the minerals extracted from the fracture surfaces of the core samples. The groundwater from the DB-1, YS-1 and YS-4 boreholes showed alkaline conditions with pH of higher than 8. The electrical conductivity (EC) values of the groundwater samples were around $200{\mu}S/cm$, except for the YS-1 borehole. Dissolved oxygen was almost zero in the DB-1 borehole indicating highly reduced conditions. The Cl- concentration was estimated around 5 mg/L and showed homogeneous distribution along depths at the KURT site. It might indicate the mixing between shallow groundwater and deep groundwater. The shallow groundwater from boreholes showed $Ca-HCO_3$ type, whereas deep groundwater below 300 m from the surface indicated $Na-HCO_3$ type. The isotopic values observed in the groundwater ranged from -10.4 to -8.2‰ for ${\delta}^{18}O$ and from -71.3 to -55.0‰for ${\delta}D$. In addition, the isotope-depleted water contained higher fluoride concentration. The oxygen and hydrogen isotopic values of deep groundwater were more depleted compared to the shallow groundwater. The results from age dating analysis using $^{14}C$ indicated relatively younger (2000~6000yr old) groundwater compared to other european granitic groundwaters such as Stripa (Sweden).

Numerical Simulation for Evaluation the Feasibility of Using Sand and Gravel Contaminated by Heavy Metals for Dam Embankment Materials (중금속으로 오염된 사력재의 댐축조 재료 활용 가능성 평가를 위한 수치 모델링)

  • Suk, Hee-Jun;Seo, Min-Woo;Kim, Hyoung-Soo;Lee, Jeong-Min
    • Economic and Environmental Geology
    • /
    • v.40 no.2 s.183
    • /
    • pp.209-221
    • /
    • 2007
  • Numerical analysis was performed to investigate the effect of heavy metal contamination on neighboring environment in case a dam is constructed by using rockfill materials contaminated by heavy metals. The numerical simulation carried out in this research includes both subsurface flow and contaminant transport in the inside of the CFRD(Concrete Faced Rockfill Dam), using two commercial programs, SEEP2D and FEMWATER. The three representative cases of scenarios were chosen to consider a variety of cases occurring in a dam site; (1) Scenario 1 : no crack in the concrete face slab, (2) Scenario 2 : a crack In the upper part of face slab, and (3) Scenario 3 : a crack between plinth and face slab in the lower part of face slab. As a result of seepage analysis, the amount of seepage in scenario 2 was calculated as $14.31\sim14.924m^3/day$ per unit width, corresponding to the 1,000 times higher value than that in other scenarios. Also, in the simulation of contaminant transport by using FEMWATER, specified contaminant concentration of 13 ppb in main rockfill zone was set to consider continuous leakage from the rock materials. Through the analysis of contaminant transport, we found that elapsed times to take for the contaminant concentration of about 2 ppb to arrive at the end of a dam are as follows. Scenario 1 has the elapsed time of 55,000 years. In Scenario 2. it is 50 years. Finally, scenario 3 has 27,000 years. The rapid transport of the contaminant in scenario 2 was attributed to greater seepage flow by 500 times than other scenarios. Although, in case of upper crack in the face slab, it was identified that the contaminant might transport to the end of a dam within 100 years with about 2 ppb concentration, however, it happened that the contaminant was hardly transported out of the dam in other scenarios, which correspond to either no crack or a crack between plinth and face slab. In conclusion, the numerical analysis showed that the alternative usage of the contaminated sand and gravel as the dam embankment material can be one of the feasible methods with the assumption that the cracks in a face slab could be controlled adequately.

Effects of Total Mixed Rations on Ruminal Characteristics, Digestibility and Beef Production of Hanwoo Steers (섬유질배합사료 급여가 비육후기 거세한우의 반추위 발효성상, 소화율 및 산육성에 미치는 영향)

  • Kim, K.H.;Kim, K.S.;Lee, S.C.;Oh, Y.G.;Chung, C.S.;Kim, K.J.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.3
    • /
    • pp.387-396
    • /
    • 2003
  • This experiment was carried out to compare the effects of feeding commercial formula feed and rice straw separately (control) versus a total mixed ration (TMR) on productivity of Hanwoo steers in late stage of fattening and on ruminal fermentation characteristics and digestibilities. Ruminal digesta from the cannulated cattle were sampled at 0, 1, 2, 3, 5, 8 hour after feeding. The steers fed TMR consumed 7.4kg per day and there was no difference between feeding systems. Daily weight gain was not significantly (P>0.05) between feeding systems, however, TMR group showed lower daily gain than control group. The amount of feed consumption per kg weight gain was higher in TMR group than control group (10.5kg and 9.7kg, respectively), resulting in a greater efficiency of feed utilization for gain. In the result of appearance rates of quality grade A were 33% higher for TMR group than those in control group. Appearance rates of grade 1 showed 56% and 75% when fed the control and TMR, respectively. Digestibilities of dry matter, crude protein, crude fiber and gross energy for TMR treatment were significantly higher (P<0.01) than those of control. Prior to feeding (0 h) and each subsequent hour, the TMR resulted in higher rumen pH (P<0.05) when compared with control ration. The concentration of NH3-N for TMR treatment maintained at higher level up to 8hr after feeding, especially increased up to 28.2mg/$d\ell$ during 1-2 hour which was two times (P<0.05) more than control. The amount of total VFA showed same trends between feeding systems. However, the ratios of branched chained fatty acid such as iso-butyric acid and iso-valeric acid for TMR treatment were significantly(P<0.01) higher than control for 3-5hr. Results showed that TMR in these trials is effective feeding system for fattening Hanwoo steers in the respect of ruminal characteristics, total tract digestibility and productivities.

New Government's Responsibility and Achievement in Records & Archives Management (공공기록물 관리에 있어 이명박정부의 책임과 '업적')

  • Lee, Seung-Hwi
    • The Korean Journal of Archival Studies
    • /
    • no.18
    • /
    • pp.257-280
    • /
    • 2008
  • The purpose of this paper is reviewing the hot issue called 'draining away the presidential records' case occurred recently and finding the root cause why the state of affairs has been happened in Korea. Though the presidential records management law ensures the rights for the prior president to view his presidential records, the prior president has copied his presidential records produced while in office and moved to his private house at his retirement. He might have interpreted his right to his presidential records too broadly and done the 'draining away' them. There was a motive why the prior president did that at that time. The reason was because the National Archives didn't guarantee the services for right viewing the records to him who wanted to review his records from right after his retirement. The National Archives have judged the draining away the prior presidential records as illegal and accused a few public servants suspected to be responsible for the affairs. The formal accuser is the National Archives, but the actual accuser might be the current Presidential Secretariat. Whatever the results of juristic judgement are, the reason why the records management field should focus and treat this case importantly is that the collapse possibility of the protection wall needed essentially and critically to the Presidential records becomes very high. The root cause of this case might exist in the fact that the records and archives management organizations have not owned the political independence. But the National Archives has submitted the revised bill of the public records and archives management law which lower the position of the National Records Management Committee controlled under from the Prime Minister to the Ministry of Administration and Security. It might be hot concern that the records and archives management organizations have difficulty for keeping the political independence if the revision would be passed. Besides the political independence factor, the most important factor needed for the right records management is the establishing the professional specificity of records management. The specific action for the establishing professional specificity would be employing of specialists and introducing the open official appointment. But it was found from the reorganization after the governmental change that the professional specificity of the National Archives have been reduced. Although the policies introduced by the new government are worrying, it might be an inheritance from the prior government. If new government would build establish the institution for the political independence of the records and archives management organizations and expand the employment of the records management professions to the local government, these affairs can be not only the responsibilities but also the achievements of the new government.

대순진리회 구천상제(九天上帝) 신앙과 도교 보화천존(普化天尊) 신앙 비교

  • 위꿔칭
    • Journal of the Daesoon Academy of Sciences
    • /
    • v.21
    • /
    • pp.157-195
    • /
    • 2013
  • 대순진리회는 '구천응원뇌성보화천존강성상제(이하 '구천상제')'를 주신(主神)으로 신앙하는 종교단체이다. 그렇다면 대순진리회의 '구천상제'와 중국 도교에서 모셔지는 '구천응원뇌성보화천존'(이하 '보화천존')은 어떤 연관성이 있는 것인가? 이런 질문을 토대로 본 글에서는 이 신들의 기원과 칭호, 도세법문(度世法門 : 세상을 제도하고자 펼친 법도) 등의 관점에서 그 차이점과 공통점을 하나씩 비교해 보았다. 먼저 기원이라는 측면에서 '구천상제'와 '보화천존'을 비교해보면, '구천상제'는 천지인 삼계의 최고신으로서 강씨 가문을 선택하여 인간의 육신으로 태어났다. 강씨 성은 상고 신농씨에서 시작되었는데, 고대 문헌에 근거하면 신농씨는 태양신, 남쪽, 불(火) 등으로 상징화된다. 이런 상징들은 '구천상제'가 인간으로 태어날 때 나타난 "하늘이 남북으로 갈라지다", "큰 불덩이가 몸을 덮치다", "천지가 밝아지는도다" 등의 현상들에서 찾아볼 수 있다. 도교의 '보화천존'은 뇌신의 특징을 가지면서 일신(日神), 월신(月神)과 관계를 맺고 있는데, 이런 면들은 신농씨로부터 분석한 '구천상제'의 신적 기원과 일치하고 있다. 또한 도교에서는 신농씨가 다스리던 세상을 중국 상고시대의 가장 이상적인 사회형태로 보고 있는데, 이것을 '구천상제'가 건설하려는 후천선경과 연관 지어 생각해보면 '구천상제'가 신농씨의 후손인 강씨 종가에서 태어난 배경을 이해할 수 있다. 도교의 '보화천존' 역시 중생의 이익을 도모하고, 조화로운 인간세상을 만드는 것을 목표로 삼고 있으며, 이것은 대순진리회 '구천상제'가 행한 대순의 목적과 거의 비슷하다고 볼 수 있다. 다음으로 '구천상제'와 '보화천존'은 칭호에서도 공통점과 차이점을 살펴볼 수 있다. 단적으로 말하자면, '구천상제'에는 '보화천존'에 비해 '강성상제'라는 칭호가 추가되어 있다는 것이다. 또한 도교에서는 '보화천존'을 최고신으로 모시지 않으며, '구천상제' 신앙에서는 '보화천존' 신앙에서와 달리 뇌신과의 관계에 대한 설명을 찾아볼 수 없다. 마지막으로 '구천상제'와 '보화천존'의 도세법문을 비교해보면 첫째, 구천상제는 세상이 혼란, 불공평, 죄악에 빠졌기에 육신으로 인간 세상에 강림한 후 대순진리를 선포하였다. 이와 유사하게 보화천존도 천하와 인간세상을 순시하여 죄악과 겁액을 없앤다는 '순시천하(巡視天下)' 사상이 있다. 물론 여기에는 차이점이 존재하는데, 그 중 하나는 '보화천존'은 순시할 때 인간의 육신으로 화하지 않았다는 점이다. 또 다른 하나는 '보화천존'이 인간 세상에 창교의 방법을 통하여 선경을 건설하고자 하는 목표를 전해주지 않았다는 점이다. '보화천존'은 교리를 가르치거나 신통을 발휘하는 데에만 중점을 두고 있다. 둘째, '구천상제'가 내린 가르침인 해원상생은 후천선경을 건설하기 위한 수단과 과정이다. 도교의 '보화천존'도 인간이 지은 많은 죄악과 겁액은 세상 사람들이 맺은 원한과 관계가 있으므로, 이런 겁액과 죄를 해소하려면 해원부터 해야 한다는 것을 수차례에 걸쳐 언급하고 있다. 도교에서 말하는 '해원'의 구체적인 내용은 주로 인간의 시비, 질병, 겁액에 관한 것이며, 그 해결 방법으로는 주로 마음속으로 『옥추보경』을 읽는 것이다. 이를 '구천상제'의 '해원상생' 가르침과 비교하면 그 사상의 폭이나 깊이, 중요성, 이론적 측면 등에서 비교적 간단한 형태로서 체계적인 면모로까지 나아가지는 못하였다. 셋째, '구천상제' 는 곤경에 처한 사람이 신명의 호칭을 부르면 그에 상응하는 신명이 달려와서 구원해준다는 '소리감응' 방법을 사용하고 있는데, 이 방법은 도교의 '보화천존' 역시 사용하고 있는 것이다. 넷째, '구천상제'는 과오를 범한 사람이 자신의 과오를 뉘우치면, 그 다음에 상제의 용서를 받음으로써 그 원한이 풀리게 된다는 참법(懺法 : 懺悔法)을 세인(世人) 교화에 자주 사용하였다. 물론 이것은 해원상생의 구체적인 적용이라 할 수 있다. 기능면에서 보면 이 방법은 『구천응원뇌성보화천존옥추보참(九天應元雷聲普化天尊玉樞寶懺)』의 참의(懺儀)와 공통되는 점이 있다. 참의는 수도자 스스로 자신의 잘못을 뉘우치고, 수도에 정진하며, 사회의 안정을 도모하고, 포덕에 힘쓰고, 악을 물리치고 선을 널리 펼친다는 것인데, 이런 의미에서 양자는 일치한다고 생각된다. 필자가 생각하건대, 대순진리회의 '구천응원뇌성보화천존강성상제'와 도교의 '구천응원뇌성보화천존' 사이에는 공통점이 아주 많지만 동시에 차이점 또한 적지 않다. 만약 더욱 다양한 자료들을 수집하여 더욱 깊고 광범위한 연구를 진행한다면 한국 대순진리회와 중국 도교, 특히 도교의 뇌법종파(雷法宗派)와의 상관관계를 해석하는 데 큰 도움이 될 것이라 생각한다.

The effect of tunnel ovality on the dynamic behavior of segment lining (Ovality가 세그먼트 라이닝의 동적 거동 특성에 미치는 영향)

  • Gyeong-Ju Yi;Ki-Il Song
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.25 no.6
    • /
    • pp.423-446
    • /
    • 2023
  • Shield TBM tunnel linings are segmented into segments and rings. This study investigates the response characteristics of the stress and displacement of the segment lining under seismic waves through modeling that considers the interface behavior between segments by applying a shell interface element to the contact surface between segments and rings. And there is no management criteria for ovaling deformation of segment linings in Korea. So, this study the ovality criteria and meaning of segment lining. The results of study showed that the distribution patterns of stress and displacement under seismic waves were similar between continuous linings and segment linings. However, the maximum values of stress and displacement showed differences from segment linings. The stress distribution of the continuous lining modeled as a shell type has a stress distribution that has continuity in the 3D cylindrical shape, but the segment lining is concentrated outside the segment, and the largest stress occurs at the location where the contact surface between the segment and the ring is concentrated. This intermittent and localized stress distribution shows an increasing as the ovality of the lining increases at seismic waves. The ovality at which the increase in stress distribution begins to show irregularity and localization is about 150‰. Ovality of 150‰ is an unrealistic value that cannot represent actual lining deformation. Therefore, the ovality of the segment lining increase with depth, but it does not have a significant impact on the stability caused by seismic load.