• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.987-995
• /
• 2013

The purpose of this study is to examine the hydraulic stability of non-toxic revetment technique for eco-friendly design of the domestic river restoration. Recently, instead of the flood control function-oriented river management policy for the engineering efficiency, the improvement of the environmental performance for the ecological river restoration project is implemented. However, the inappropriate hydraulic design criteria of the new revetment technique happen to the economic losses at flood season frequently. The hydraulic stability of the riprap and the block include the banks of rivers, riverbed protection, scour protection and so on. In this study, the high speed experimental channel was developed, which has the maximum velocity of 3.5 m/s, to perform the hydraulic experiments of the block method with non-toxic glue with various conditions to find the critical velocity of the revetment block for the hydraulic stability.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.251-259
• /
• 2006

For the electrification of the existing railways, the security of the restriction boundary of building with mechanistic stability research on the antiquated tunnel must be accomplished essentially. If the tunnel don't secure its restriction boundary of building, the reconstruction based on improvement of tunnel alignment are generated and its surveying data are required. The precise surveying was conducted with the same coordinate system for three tunnels of Youngdong tramline, and the restriction boundary of building of the straight and curve section were analyzed effectively by acquiring the data of profile and cross section, profile rail-height, rail-grade, cross tunnel height, and restriction boundary of building. This study is presented for valuation data of the stability of the electrification design to construct and analyze restriction boundary of building, which compared with the drawing and its existing design using profile and cross section. After this, it is interoperable to increase the development of real-time monitoring system on the tunnel structures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.221-221
• /
• 2020

최근 기후 변화에 따라 국내 하천은 급격한 유량 증가로 인해 하상의 변화에 많은 영향을 미치고 있다. 특히, 홍수시 하상의 변화에 영향을 미치는 유량 및 유속, 하상재료의 종류 및 대표입경, 입자의 특성 등이 있으며, 이런 요인들은 하상재료의 유실에 영향력을 미치고 있다. 또한, 하상재료의 유실에 영향을 미치는 하상재료의 단위중량, 대표입경, 재료의 특성과 관련이 있으나, 현재 까지 다양한 연구가 진행되고 있지만, 하상재료의 한계조건에 영향을 미치는 관련된 연구는 국내에서 미비한 실정이다. 본 연구에서는 하상의 재료의 종류, 입자의 특성, 입자의 크기에 따라 재료가 가지는 한계 유속과 한계 소류력의 영향력을 파악하고자 진행하였다. 본 연구에서 사용된 실험 수로는 인제대학교에서 개발한 무경사형 고속수로(Jung. 2019)는 수조 제원 가로 1.5 m, 세로 0.95 m, 높이 2.4 m, 수로는 개수로의 형태로 총 길이 10 m, 폭과 높이는 각각 0.3 m인 무경사 고속수로에서 진행되었으며, 사용된 재료는 일반 하천에서 사용되고 있는 모래, 황토를 이용하여 적정 비율을 섞어 시료를 제작하였다. 제작된 시료는 하천설계기준에 제시되어 있는 재료에 대한 등급을 비교했을시, 2-3등급 사이의 재료로 판단되며, 모래와 황토의 비율이 50:50 일때 입도 분포가 가장 좋은 재료로 나타났으며, 제작된 시료를 수로에 삽입하여 유하 전후를 수위센서를 통해 세굴율을 측정하였다. 세굴 측정시 모래 100%로 제작된 시료가 가장 많은 세굴이 일어났으며, 모래 25%, 황토 75%로 이루어진 시료가 가장 적은 세굴이 일어났다. 바이오폴리머의 강도 증진을 보기 위해 세굴이 가장 심하거나, 세굴이 적은 재료에 바이오 폴리머를 섞어 추가 실험을 진행 하였다. 본 연구를 통해 친환경적인 하상재료의 한계유속, 한계소류력에 대한 안정성평가를 진행하여 재료의 안전성에 대해 평가하고 기초자료로 기여하고자 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2009

This paper presents a comparative study of reinforced soil slope by using LEM and SSR-FEM. Current analysis methods for reinforced soil wall are based on LEM. SSR-FEM assumes a reduction of soil strength by a factor to reach a critical state prior to failure based on continuum mechanics. In this study the comparisons are concerned with the factor of safety and the potential failure surface in reinforced soil wall. We investigated the stability of the reinforced soil wall with a slope of $60^{\circ}$ by LEM and SSR-FEM. The comparisons indicated good performance of the SSR-FEM on stability analysis of reinforce soil wall.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.55-55
• /
• 2020

개수로 흐름에서 유체특성을 파악하는 것은 매우 중요하다. 특히 홍수가 발생하거나 유속의 증가에 따라 유체의 거동은 복잡하고 예측하기 어려워진다. 이러한 복잡한 유체거동은 하천시설물 설계, 시공 및 관리에 있어서 구성재료의 보호능력에 따라 예상하지 못한 조건에서 쉽게 파손될 수 있다. 국내 하천의 경우 한계유속과 한계소류력에 의해 하천설계에 적용되고 있다. 한계 유속의 경우 간단한 수식에 의해 산정될 수 있지만 실제 하천의 보호능력을 대표하기는 힘들기 때문에 한계소류력이 동시에 고려되어야 한다. 한계소류력은 개수로 흐름에서 복잡하게 발생하는 이차류나, 난류 특성에 의해 산정하거나 예측하기는 매우 어렵다. 한계 소류력 뿐만 아니라 하천을 구성하는 재질의 조도계수 역시 균일하지 못하고 매우 예측하기 어렵다. 따라서 본 연구에서는 이러한 복잡한 양상을 나타내는 수리학적 요소에 대해 표준화된 실험수로에서 실험을 통해 평가하고, 체계화된 설계지침이 되고자 연구를 진행하였다. 본 연구에서는 자연하천과 유사한 조건의 경사를 가지는 경사수로와 경사의 영향에서 자유롭게 평가를 진행하고자 무경사수로에서 실험연구를 통해 제방 재료의 안정성 평가방법을 제시하고, 재체의 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 하천의 설계나 평가에 적용되는 평균 소류력 개념은 복잡한 난류흐름에서 평가지표로써 대표하기 힘들기 때문에 바닥에서 발생하는 소류력을 직접 측정하고, 측정된 소류력을 검증하고자 난류유속 u', v'을 이용하여 Reynolds stress산정하여 Total shear stress를 추정하는 기법을 사용하여 검증하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.41 no.2
• /
• pp.137-147
• /
• 2008

Critical and allowable shear stress acting on the mattress revetment, is presented in this study. First of all, shear stress at each spot is computed when the hydraulic power act on the waterway. Secondly, median diameter of the filling rocks is computed using shear stress and Shields coefficient which are used to decide the critical motion of the particle. Finally, the range of critical and allowable shear stress is estimated which meet the particle stability and indicated that the mattress is a stable hydraulic structure in comparison with the riprap. Therefore the required median diameter of riprap is three times higher than that of mattress. Contrarily, this study also analyzed that resisting power of mattress to shear stress is three times higher than that of riprap on the same size.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.381-391
• /
• 2007

A series of talus slope stability analyses were carried out using 2D FEM and 3D limit equilibrium methods for this study. The FEM analyses on Phase 2 were performed to delineate failure depths based on stress distributions for each slope. The results revealed that the failure surface exist in the colluvium layer of about 3-10 m thickness. Three dimensional models, derived from the FEM analyses and geological field survey, were made for the use in a 3D limit equilibrium analysis. The result shows that all the talus slopes are stable under dry condition, but unstable under saturated condition due to heavy rain.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.11
• /
• pp.11-22
• /
• 2019

Limit state design (LSD) and allowable stress design (ASD) are two main types of soil nailing design methodologies. In the LSD method, stability is determined by applying individual coefficients to ground strength, working load and etc. The ASD method calculates the safety factor and compares it with the minimum safety factor to determine the stability. The global design trend of soil nailing system is changing from the ASD method to the LSD method. The design method in Korea still adopts the ASD philosophy while others mostly do the limit state design. In this study, four soil nail design methods, 'FHWA GEC 7' in U.S. (2015), 'Clouterre' in France (1991), 'Soil nailing - best practice guidance' in U.K. (2005), 'Geoguide 7' in Hongkong (2008), and 'Design guide for slope in construction work' in Korea (2016) were applied to the evaluation of the stability and the results were analyzed comparatively in brief. It is revealed that the design method of 'the overall stability of soil nail walls' in Korea is the most conservative and next those by FHWA, Clouterre and CIRIA become more conservative in order. However, the difference of results obtained from FHWA and Clouterre is negligible. Also, this study found out that efforts to improve domestic design criterion are needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.501-517
• /
• 2011

In general, the tunnel stability during excavation is assessed by comparing measured displacements at roof and sidewall to control criteria. The control criteria were established based on the past experience that considered ground conditions, size of the tunnel cross section, construction method, supports, etc. Therefore, a number of researches on the control criteria using the critical strain have been conducted. However, the critical strain obtained from uniaxial compression tests have drawbacks of not taking damage in rock mass due to increase of stress level and longitudinal arching into account. In this paper, damage-controlled tests simulating stress level and longitudinal arching during tunnel excavation were carried out in addition to uniaxial compression tests to investigate the critical strain characteristics of granite and gneiss that are most abundant rock types in Korean peninsula. Then, the critical strains obtained from damage-controlled tests were compared to those from uniaxial compression tests; the former showed less values than the latter. These results show that the critical strain obtained from uniaxial compression tests has to be reduced a little bit to take stress history during tunnel excavation into account. Moreover, the damage critical strain was proposed to be used for assessment of the brittle failure that usually occurs in deep tunnels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.857-864
• /
• 2012

A linear stability analysis of a diffusion flame with radiation heat loss is performed to identify linearly unstable conditions for the Damk$\ddot{o}$hler number and radiation intensity. We adopt a counterflow diffusion flame with unity Lewis number as a model. Near the kinetic limit extinction regime, the growth rates of disturbances always have real eigenvalues, and a neutral stability condition perfectly falls into the quasi-steady extinction. However, near the radiative limit extinction regime, the eigenvalues are complex, which implies pulsating instability. A stable limit cycle occurs when the temperatures of the pulsating flame exceed the maximum temperature of the steady-state flame with real positive eigenvalues. If the instantaneous temperature of the pulsating flame is below the maximum temperature, the flame cannot recover and goes to extinction. The neutral stability curve of the radiation-induced instability is plotted over a broad range of radiation intensities.