• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.501-501
• /
• 2016

하천은 크게 이수와 치수 및 환경 등의 주요 기능을 가지고 있다. 이수는 하천과 물이 주는 가치를 말하며, 치수는 기능이라기보다는 엄밀한 의미에서 하천관리를 통한 자연재해 방지를 의미한다. 이러한 이 치수 기능의 확보와 수변환경 조성을 위해 친환경적 수리구조물인 가동보의 설치가 증가 하고 있다. 가동보는 하천에 주로 설치되는 수리구조물 중의 하나로 국내에서는 2000년대부터 고정보를 대신하여 설치가 시작 되었으며, 최근 친환경적 하천정비 및 다양한 목적 등으로 국내 하천에 약 1,200여개의 가동보가 설치 및 운영되고 있다. 국내에 적용되고 있는 가동보 중 개량형 가동보의 제작 및 시공기술은 해외의 원천기술을 도입한 것으로 자재 수급 및 유지보수가 용이하지 못할 뿐만 아니라, 국내 여건에 맞지 않아 많은 문제점을 가지고 있다. 이에, 본 연구에서는 수자원 확보 및 수변 공간 조성 등을 위해 1) 기존 스틸소재의 개량형 가동보를 하이브리드(GFRP+스틸)소재로 개발하고, 2) 상류에 유하되는 이물질을 수위 저하 없이 하류로 배출하기 위해 각 경간의 개별 작동시스템을 개발하며, 3) 효율적인 하천 관리를 위하여 가동보 상단으로 월류 되는 하천 유량을 계측하기 위한 실시간 유량측정 시스템 개발 등으로 첨단 하이브리드 가동보를 개발하였다. 개발결과 기존 개량형 가동보의 단점인 부식해결로 인해 내구성을 확보하였으며, 경간별 개별 작동시스템 적용으로 하천 수위 조절이 가능하였다. 또한 실시간 유량 계측 시스템 적용으로 실시간 하천유량 계측이 가능해 개발된 기술을 국내 가동보에 적용한다면 원활한 하천 수위 관리 및 실시간 유량 측정이 가능하여 안전한 하천관리가 가능할 것으로 판단된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.6
• /
• pp.48-55
• /
• 2009

The purpose of using Gas Generator Oxidizer On/Off Valve(GOV) is to control opening and closing of oxidizer mass flow. This paper describes analytical results of flow and structural properties for four different GOV models, using commercial software such as Fluent(Ver. 6.3.26) and NASTRAN(2005 r.2), PATRAN(2005 r.2). Analytical results show that GOVs could generate 2.3~3.8 kg/s of oxidizer mass flow rate and come up with 1.09~1.42 of safety factor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.733-739
• /
• 2004

As per the recent technology related to safety of vehicles, Active safety system is being developed in combination withthe technology of electronic system. For example, ABC(Active Body Control), ABS(Antilock Brake System), ACC(Adaptive Cruise Control) are representative of this system. This technology is based on an electronic system, and shares a lot of data through network-system invehicles. Therefore, the control-algorism and the practicable application are realized in this research in order that CAN, network system for vehicles can run the brake device, which is composed mechanically and hand-operated. Additionally the possibility is confirmed that this control-system can be compatible with the existing electronic system in vehicles.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.84-90
• /
• 2019

In this study, a fire and evacuation inside an electronic equipment room in environmental energy facilities were conducted and evaluated using a numerical analysis method. In the fire simulation, the visual distance, temperature distribution, and CO concentration distribution were analyzed using FDS. Based on the results, the Pathfinder program, which is an evacuation simulation, was used to calculate the evacuation time of the occupants and derive an evacuation safety evaluation. As a result, the Available safe Egress time (ASET) of P-01 and P-05 was 203.3 and 398.6 s, respectively. For the Required safety Egress time (RSET) results, all evacuees were evacuated at all points and the safety of the evacuee was secured this simulation showed that the safety evaluation is based on the non - operation of the fire - fighting equipment to improve the safety, making it possible to secure better evacuation safety performance owing to the fire of other fire - fighting facilities.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.19-29
• /
• 2021

Due to the climate changing, the world's countries are tightening regulations on CO2 and air pollutants emission to solve them. In addition, eco friendly vehicles is increasing to replace automobiles in internal combustion engine. Recently, the government is supporting the expansion of hydrogen refueling infrastructure and localization of core equipment in refueling facilities according to the hydrogen economy road map. In this study, design of the Excess flow limiting device in FCEV cylinder valve using by finite element analysis and performed performance tests on prototype. Major test results as hydrostatic strength, continued operation, operation, pressure impulse, leakage showed that the excess flow limiting device meets the performance requirements according to ISO 12619-2 and ISO 12619-11.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.391-402
• /
• 2021

Purpose: By categorizing opinions by subject in the safety certification ecosystem, we want to identify weaknesses in system operation and suggest improvement plans so that the safety certification system can have quick resilience against future variability. Method: Through literature research and data analysis, similar domestic and foreign safety certifications and related cases, as well as the current status of international standards and national standards, etc. were confirmed, and a fact-finding survey was conducted for each stakeholder in the safety certification ecosystem, and problem types and improvement measures were established. Result: We conduct a fact-finding survey of the overall system, such as quality satisfaction with safety certification target products, obstacles in the development, manufacturing and use process, and safety certification-related improvements, targeting workplaces that manufacture, import or use safety certification target machines By discovering and categorizing problems and weaknesses in system operation, detailed implementation tasks were derived to establish improvement directions and improve operability. Conclusion: For the advancement and internationalization of the safety certification system, it is necessary to efficiently carry out the detailed promotion tasks derived from this study. In addition, in order to strengthen the resilience to the variability of the safety certification ecosystem, the operating system of a virtuous cycle structure by improving the mutual relationship between each subject construction is considered important.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.107-110
• /
• 2009

A basic design for a Technical Development Model (TDM) of liquid oxygen lines from the turbopump exit to the oxidizer valves of the combustion chamber and the gas generator was conducted to develop a turbopump-fed liquid rocket engine. The TDM is composed of straight lines, elbows, bellows, a branch, an orifice, flanges and a heat insulator. Materials were determined by consideration of operation conditions, weight constraint and manufacturing procedures. The size and the location of each component were determined by flow analysis of the required flowrate and the pressure loss. Basic designs of the components were conducted by consideration of the operating temperature and the maximum expectation operating pressure. The safety factors were evaluated by structural analysis of design of each component.

• Journal of the Korean Institute of Gas
• /
• v.11 no.2 s.35
• /
• pp.37-42
• /
• 2007

This paper presents the leakage safety of two O-rings, which are located at the rectangular groove between a valve body and a valve stem. The leakage safety analysis of 0-ring seals has been computed as functions of a compression set and a liquefied petroleum gas pressure of a LPG cylinder using a FEM program, MARC. The FEM computed results indicate that the loads from the filling pressure of $8kg/cm^2$ to the upper limit of the safety valve, $24.8kg/cm^2$ work safely according to the pressure vessel code. But two O-rings should consider the aging effects for an increased safety of the o-ring.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.534-541
• /
• 1997

1000MWe급 피동형원자로기 안전계통 성능 및 RELAP5 코드의 적용성 평가를 목적으로 AP600을 참조노형으로 설정된 1000MWe급 대용량 피동형원자로에 대한 냉각재 상실사고를 모의 해석하였다. 대형냉각재상실사고시 발생되는 현상들은 기존 원자로와 큰 차이가 없고, 이들 현상을 모의하기 위한 모델링 요건들이 피동형계통 분석에 동일하게 요구되었으며, 계산된 PCT가 규제기관의 허용치에 충분한 여유도를 갖고 있어 대형냉각재상실사고시 충분한 노심냉각 능력을 갖는 것으로 평가되었다. 또한 안전주입 배관이 파단되는 소형냉각재 상실사고를 해석한 결과 KP1000의 피동안전계통은 ADS의 작동에 의하여 노심을 노출시키지 않고 적절한 사고완화 기능을 수행할 수 있는 것으로 분석되었다.