• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.76-85
• /
• 2014

To establish the necessary safety technology in high-pressure toxic gas facilities, especially for the corrosion, which is the main causes of toxic gas accident, this study adopts and investigates the API-581 procedures developed by the American Petroleum Institute (API). And the applicability of the 8-step analytical procedures of consequence analysis in API-581 is discussed, and a method for consequence analysis in high-pressure toxic gas facilities is suggested. Based on the discussion and results, the analytical procedure is simplified as the 6 steps in total for the effective application to high-pressure toxic gas facilities: Step 1 (determination of representative material), Step 5 (determination of release type), Step 6 (determination of phase of fluid), and Step 8 (estimation of damage range) are not applied: Step 3 (estimation of total amount of release) is applied only for the inventory group concept; Step 4 (estimation of release rate) only for the gas release rate; and all of Step 2 (selection of release hole size) and Step 7 (evaluation of post-release response) are applied. In the proposed method, the generally applicable method of CCPS is adopted as alternative method for Steps 5 and 8.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.386-394
• /
• 2009

Formaldehyde is used in lether manufacture, a dry plate and an explosive. It is by-product of ozonizing process in filtration plant. The effects of exposure are eye pruritus, tickle, runing nose, blocking nasal passages and headache. It also makes a dried throat and causes inflammation. It is classified as B1 group for inhalation by US. EPA, which can cause cancer in human. For analysis of formaldehyde, formaldehydes-DNPH derivative was extracted with solid cartridge and was analyzed by High Performance Liquid Chromatography/Diode Array Detector (HPLC/DAD). The detection limit was $3{\mu}g/L$ and the recoveries were 72.3~109.1% (RSD 2.9~11.5%). Water samples were collected in four Korean rivers, four times per year seasonally for 10 years from 1998 to 2007. The monitoring results were 48.8% (630/1291), $5.15{\sim}101.9{\mu}g/L$ in purified water. Because of non-carcinogen in drinking water, hazard index is calculated with RfD. Results of excess cnacer risk was below 1 and was considered as safe value.

• Journal of Chest Surgery
• /
• v.31 no.3
• /
• pp.221-225
• /
• 1998

From February 1996 to May 1997, 18 patients underwent mitral valve repair for mitral regurgitation. There were 9 male and 9 female patients aged from 19 to 68 years(mean, 53). Thirteen patients were in New York Heart Association(NYHA) class III and IV. The cause of mitral regurgitation was degenerative in 12 patients, rheumatic in 5 patients and infective in 1 patient. Fifteen patients were in Carpentier's functional classification II, 2 patients in Carpentier's class III and 1 patient in Carpentier's class I. Surgical procedures included prosthetic ring annuloplasty(16 cases), rectangular resection of posterior leaflet(15 cases), chordal shortening(5 cases), triangular resection of anterior leaflet(2 cases), commissurotomy(2 cases), partial transposition of posterior leaflet(1 case). These procedures were combined in most patients. There was no operative death. These patients have been followed from 1 to 15 months, mean of 6.7 months. There was one late death resulted from low cardiac output following mitral valve replacement. The function of the repaired valve in other 17 patients has remained satisfactory during the observed interval. We consider that mitral valve repair is highly satisfactory in patients with mitral regurgitation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.107-120
• /
• 2020

In a performance-based evaluation of structures in use, the current performance is assessed by summing up the weighting of the evaluation indices for each performance. In this study, to suggest a performance-based evaluation technique for NATM tunnels in use, the performance evaluation indices were derived by examining the characteristics and similarities of each index developed from previous study. The weighting of the evaluation indices was derived by calculating the relative importance of each evaluation indices from the AHP analysis. In order to develop a quantitative evaluation model, grading criteria for each performance index was derived through literature review, and performance evaluation tables for road and railway tunnels were presented. In order to verify the significance of the proposed performance evaluation model, the correlation analysis was performed between each evaluation index and the final evaluation result. In the correlation analysis, the survey data measured through precision safety diagnosis in the tunnel in use was applied. It may be said that the proposed evaluation indices, weighting, criteria and evaluation models for tunnels in use can be applied to the performance-based maintenance system of tunnels.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.419-429
• /
• 2016

In a bid to avoid the economic loss resulting from traffic jam in urban area, a deep underground road at 40 m depth has been considered and the first class disaster prevention facilities shall be applied according to domestic guideline. Automatic-monitoring fire extinguishing system designed to use for fire fighting has been widely applied at home and abroad. Recently development and commercialization through theoretical and experimental research to apply to road/railroad sector have been underway. Based on such performance of automatic fire extinguishing system, technical/economic analysis of existing water spray systems was conducted and as a result, it has demonstrated the superiority in terms of fire suppression as well as in cost efficiency. Then to commercialize this system, more diverse studies that will incorporate the characteristics of domestic tunnels are needed and should the system be promoted through institutional improvement, it's expected to become one of the advanced nations with own original technology in a life safety system industry throughout the world.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.190-198
• /
• 2018

In recent years, non-welded building hardware has been installed by bolt assembly is used. The non-welded building hardware method can reduce accidents caused by welding, and can be constructed by bolt assembly, which can reduce labor costs and shorten the construction period. However, there is a need for a method to compensate for the occurrence of buckling at the time of construction. The purpose of this study is to evaluate the behavior of joints between steel pipe and fastener and to evaluate the behavior of joints of non-welded and welded hardware frame. As a result, it was found that the foundation steel structure without welded joints was deformed to a rotation angle of member much larger than the allowable interlayer displacement angle 0.01 to 0.02 required according to the seismic load rating in the seismic load resistance system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.390-396
• /
• 2009

To select optimal shade material in paddy soil, growth characteristics and ginsenoside contents were investigated in new cultivar, 'Cheonpoong' of three-year-old ginseng cultured under three kinds of shade materials such as three-layered blue and one-layered black PE (polyethylene) net (TBPN), blue PE sheet (BPSS), and aluminium-coated PE sheet (APSS). The order of light transmission ratio and air temperature by shade materials were BPSS > APSS > TBSB among three shade materials. Average soil water tension in PDC and IDC was 64 mbar (absolute soil moisture, 25%) and 123 mbar (absolute soil moisture, 17%), respectively, and soil water tension in IDC was changed more distinctly than that of PDC by season and shade materials. Yield in PDC was distinctly decreased more than that in IDC because of the increase of discolored-leaf and rusted-root ratio. BPSS and TBPN among three shade materials were the most effective on the increase of yield in PDC and IDC, respectively. Ratio of rusty-colored root showed not significant difference by drainage class and shade materials. Contents of panaxatriol ginsenoside (Rg1, Re and Rf) were decreased in PDC, while it of panaxadiol ginsenoside (Rb1, Rc and Rd) were increased in IDC. Total ginsenoside contents of IDC was distinctly higher than that of PDC, and BPSS showed the highest contents among three shade materials regardless of poorly and imperfectly drainage class.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.223-228
• /
• 2017

This study was conducted to investigate the effects of fermented spent mushroom substrates (F-SMS) of Flammulina velutipes on growth performance, carcass traits, and economic characteristics of Hanwoo steers. A yeast strain (Saccharomyces sp. UJ14) and Bacillus strain (Bacillus sp. UJ03) isolated from fresh spent mushroom substrates of Flammulina velutipes were used as probiotics to prepare F-SMS. Twenty-four Hanwoo steers (14 months old) were allocated to three dietary treatments via a randomized block design and were slaughtered at 30 months of age. These treatment groups included Control (TMR), T1 (TMR containing 10% of F-SMS) group, and T2 (TMR containing 30% of F-SMS). Body weight gain was not influenced by the experimental diets. DM and TDN intakes in the finishing period were significantly (p < 0.05) greater in group T1 than in other groups. CP intake was significantly (p < 0.05) greater in group T2 than in other groups during the whole experimental period. Among carcass traits, rib-eye area and back fat thickness tended to increase with F-SMS supplementation. The appearance rate (%) of a meat yield more than grade A was the highest in group T1. The net profits increased by 1.2% and 13.3% in groups T1 and T2, respectively. In conclusion, if a proper feeding program (including feed safety) can be ensured, spent mushroom substrates of Flammulina velutipes can prove to be a highly profitable feed source for Hanwoo steers.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.12-18
• /
• 2023

Beef traceability systems help prevent the distribution of Hanwoo (Korean native cattle) meat as imported beef. In particular, assigning a traceability number to each cattle can provide all information regarding the purchased Hanwoo meat to the consumers. In the present study, a DNA identity test was conducted on 344 samples of Hanwoo meat from large livestock product stores in Seoul between 2021 and 2022 to determine the authenticity of important label information, such as the traceability number. Traceability number mismatch was confirmed in 45 cases (13.1%). The mismatch rate decreased to 11.3% in 2022 from 14.7% in 2021, and the mismatch rate was higher in the northern region (16.9%) than in the southern region (10.2%). In addition, of the six brands, B and D showed satisfactory traceability system management, whereas E and A showed poor traceability system management, with significant differences (P<0.001). The actual traceability number confirmation rate was only 53.9% among the mismatch samples. However, examination of the authenticity of label information of the samples within the identified range revealed false marking in the order of the traceability number (13.1%), sex (2.9%), slaughterhouse name (2.2%), and grade (1.6%); no false marking of breed (Hanwoo) was noted. To prevent the distribution of erroneously marked livestock products, the authenticity of label information must be determined promptly. Therefore, a legal basis must be established mandating the filling of a daily work sheet, including the traceability number of beef, in partial meat subdivisions. Our findings can be used as reference data to guide the management direction of traceability systems for ensuring transparency in the distribution of livestock products.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.209-219
• /
• 1997

Objectives: Anterior approach to achieve arthrodesis of the cervical spine has become a widely accepted and often-used approach since its earliest reports by Bailey and Badgley, Smith and Robinson and Cloward. However, anterior interbody fusion in the presence of the posterior instability may be complicated by the bone graft dislodgement, kyphotic defomity or nonunion. As an attemp to prevent this undesirable complication, additional methods such as skeletal traction, halo appratus or even posterior fusion has been utilized. Therefore, The cervical spine locking plate(CSLP) with the anterior intervertebral body bone grafting provide immediate cervical stabilization and widely successful in achieving fusion. Material and methods: This study analysed 14 patients who underwent a single anterior procedure and application of CSLP for the treatment of the cervical spinal disorder. Eleven patients were disc herniations and three patients were traumatic lesion. The average age of the patient was 47 years and the mean follow up periods was 20 months ranging from 13 to 27 months. Results: Ambulation was started 2nd day after the operation with the aid of the Philadelpia orthoses. Bone union was observed 13 cases on average 12 weeks after operation. The one case was nonunion with plate breakage without clinical symptom. Conclusion: Anterior fusion with CSLP are thought to be a safe and valuable method for treating cervical spine disorder.