• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.485-490
• /
• 2009

강원도의 약 89%가 산지로 되어 있기 때문에 강원지역 주민의 거주지는 대부분 홍수 피해를 강하게 받는 계곡이나 하천변에 잡고 있으며 매년 반복되는 홍수의 피해 위험이 높다. 따라서 홍수 시 생활공간을 보호하기 위한 제방의 안전성을 확보하는 것은 강원도의 하천관리에서 가장 중요한 점이다. 호안공법은 일반적으로 하천의 생태계나 경관적인 측면에서 부정적인 경우가 많은 인공시설물이기 때문에 최근에는 자연과 어울리는 친자연형 호안공법을 추구한다. 본 연구는 강원도 내 1개 국가하천 6개 지점, 214개 지방하천 2,760개 지점에 대한 하천 호안공법의 종류, 식생상태, 하천특성, 호안파괴 특성 등을 조사하고 하천호안공법 적용 하천특성과 호안공법, 식생 등의 관계를 분석하여 강원도형 호안공법 개발의 기초자료를 제공하는 데 목적이 있다. 강원도에 설치된 호안공법은 망태형, 붙임형, 블록형, 쌓기형, 옹벽형으로 구분할 수 있으며, 영동지역은 망태형 25%, 옹벽형 20.1.%, 블록형 18.3%를 차지하고 있으나 영서지역 하천은 쌓기형 32.9%, 망태형 19.2%, 옹벽형 16.6%를 나타내고 있다. 두 지역에서 옹벽이 16%이상을 차지하는 것은 하천경사가 급하고 만곡 수충부가 많아 홍수 시 구조적인 안정성이 큰 옹벽을 통한 호안보호에 따른 것으로 판단된다. 옹벽을 제외하면 하천평면이 호안공법 선택에 큰 영향을 미치지 않은 것으로 보이며 오히려 하천경사나 하천재료 특성이 반영된 것으로 판단된다. 호안파괴의 원인은 홍수 시 하상의 세굴이다. 그러나 옹벽호안은 국부적인 하상세굴에도 콘크리트 구조특성으로 쉽게 파괴되지는 않는 것으로 판단된다. 보 하류지점에 설치된 돌망태 호안은 하상저하와 보에 의한 유향변동으로 발생된 강한 수충현상에 의해 파괴되는 것으로 조사되었다. 호안의 식생 활착은 블록형, 망태형, 쌓기형 호안의 순으로 양호한 것으로 나타났다. 망태형이나 쌓기형 호안은 영동지역보다는 영서지역에서 높은 식생 피복도를 나타냈으며, 이는 하천의 경사와 호안의 침수빈도와 관계가 큰 것으로 판단된다. 식생블록형 호안은 지역 구분 없이 식생피복도가 높고 하천경사나 재료특성에도 불구하고 강원도의 하천호안공법으로 우수한 기능을 한다. 시급히 식생을 도입하고자 하는 경우 식생블록형 호안이 추천되며 호안공의 안정성과 식생의 다양성 측면에서는 망태형 호안공법이 추천된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.812-817
• /
• 2018

Blockchain technology removes the central system and connects each block throughout every person. This paper proposes new method to exploit the blockchain feature to apply existing donation system. In the current system, the donator does not donate to poor neighbor which means donator must have to donate some donate organization. The donator does not recognize how the donation has been spent after donation. In this case, we can solve that problem by using the blockchain where the donator can watch how the money works and everyone can browse the account history. To make a virtual fundraising box based on blockchain technology, donator sends some money at virtual account and exchanges the money to crypto-currency. Donator can use crypto-currency which is donate to poor neighbor that poor neighbor can exchanges crypto-currency to the money. Through this proposed system, the donation is managed by secure and transparent blockchain system.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2009

PES (Programmable Electronic System) is used by software development for the train control system. PES has been widely used in real world and consists of hardware, firmware and application software. The PES are easily apply to many applications because its implementation has high flexibility. Many safety critical functions are realized through software in safety critical system. Normally, it is difficult to detect failures for PES system because the PES is too sophisticated to identify sources of the failure. So, the reliability analysis is needed by using software fault tolerance techniques. Currently, there are the recovery block, distributed recovery block, N-version programming, N self-checking programming in fault tolerance techniques. In this paper, the models of recovery block and N-version programming in software fault tolerance techniques are suggested by using the Markov model. Also, the reliability in the train control system is analyzed through changing time. The fault occupancy rates of the program, adjustment test and voter are stationary. So, the relation between time and reliability is presented by using Matlab program. In the result of reliability, the reliability of recovery block is more high than N-version programming in case of the same number of substitution block.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.801-813
• /
• 2017

Passive force acting on the kicker block used to support a raker is different dependent on soil's type. The passive force incorporating a factor of safety is considered for design of the retaining wall. However, an actual passive force developing on the kicker block is overestimated and it may lead to an unsafe design. In this study, the actual passive forces acting on the kicker block in soil ground are evaluated using 3-D Finite Element Program, PLAXIS. Soft and weathered soils are selected as a soil ground. The relation curves between horizontal displacement and actual passive force of the kicker block for each soil ground are obtained through numerical analyses. From the curves, the actual passive forces are determined as a yielding point, which are about 55.5% and 66% of Rankine's passive forces in soft and weathered soils, respectively.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.15-21
• /
• 2019

Allowing only authorized users to record and inquire in the ledger, private blockchain technology is attracting attention from institutions and companies. Based on distributed ledger technology, records are immutable. Because news via the Internet can be easily modified, the possibility of manipulation is high. Some false communication report systems are designed to prevent such harm. However, during the gap between the false communication report and verification time, contents on the website can be modified, or false evidence can be submitted intentionally. We propose a system that collects evidence using a headless browser for more accurate false communication management, and securely preserves evidence through a private blockchain and prevents possibilities of manipulation. The proposed system downloads original HTML, captures the website as an image, stores it in a transaction along with the report, and stores it in a private blockchain to ensure the integrity from acquisition to preservation of evidence.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.55-60
• /
• 2019

It is true that Blockchain has been known as a core technology for cryptocurrency like bitcoin (BTC). It is caused by its rapid value rises. Now, one BTC is trading around 10,000 US dollars while it bought just less than one dollar at its first trading in May, 2010. Blockchain makes on-line transactions possible by the safe cryptocurrency swiftly based on P2P network and distributed public ledger while its on-line traffic is rapidly increasing. However, this technology has bigger potential in the fourth industrial revolution era and its application areas will be varied. The evolving intelligent information society needs to make new added value through utilizing, sharing and processing of useful digital information. Obstacles such as hacking and fraud often exist when transactions of digital properties, right transfers, etc. are done through digital network specialized with anonymity. It is expected that blockchain will be a definite solution in this regard. This paper addresses useful development directions and countermeasures for blokchain in the digital economy by analysis of its current status and issues.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.159-168
• /
• 2021

Building Information Modeling (BIM) data is a digitized construction design by worldwide construction design stands rules. Some research are being conducted to utilize blockchain for safe sharing and trade of BIM data, but there is no way to store BIM data directly in the blockchain due to the size of BIM data and technical limitation of the blockchain. In this paper, we propose a method of storing BIM data by combining a distributed file system and a blockchain. We propose two network overlays for storing BIM data, and we also propose generating the Level of Detail (LOD)-based merkle tree for efficient verification of BIM data. In addition, this paper proposes a system design for distributed storage of BIM data by using blockchain besu client and IPFS client. Our system design has a result that the processing speed stably increased despite the increase in data size.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.878-883
• /
• 2020

Cryptographic algorithms are used to prevent the illegal manipulation of data. They are divided into public-key cryptosystems and symmetric-key cryptosystems. Public-key cryptosystems require considerable time for encryption and decryption compared to symmetric-key cryptosystem. On the other hand, key management, and delivery are easier for public-key cryptosystems than symmetric-key cryptosystems because different keys are used for encryption and decryption. Furthermore, hash functions are being used very effectively to verify the integrity of the digital content, as they always generate output with a fixed size using the data of various sizes as input. This paper proposes a method using RSA public-key cryptography and a hash function to determine if a digital image is deformed or not and to detect the manipulated location. In the proposed method, the entire image is divided into several blocks, 64×64 in size. The watermark is then allocated to each block to verify the deformation of the data. When deformation occurs, the manipulated pixel will be divided into smaller 4×4 sub-blocks, and each block will have a watermark to detect the location. The safety of the proposed method depends on the security of the cryptographic algorithm and the hash function.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.