• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.372-378
• /
• 2021

A body armor vest is a form of munition related directly to the safety and life of combatants. Therefore, it must meet the requirements for ballistic resistance. The ROK demands the performance of body armor vest meet the Level IIIA specified by the NIJ STD-0101.06 published by the US National Institute of Justice. This study performed acceptance tests on body armor vests. The factors for evaluating the ballistic resistance evaluated were not only whether it penetrates when shooting but also whether the BFS (Backface Signature) depth does not exceed 44 mm when it does not penetrate. The factors were assessed to determine if they were consistent or not. The BFS depth is affected by various test factors, such as the physical properties of the backing material and the changes in the amount of impact with the bullet velocity. In this study, an analysis of the bulletproof performance was performed by extracting the data with the same conditions using ANOVA to remove the influence of these external factors. The analysis revealed a correlation between the BFS depth, bullet velocity, vest conditions, and protection area. The mass production process was analyzed by estimating the Interval of BFS on each lot. Through this, a new methodology for ballistic resistance evaluation and paradigm for future quality assurance is suggested.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.445-457
• /
• 2020

The purpose of this study is to analyze various issues that may arise from the recent deregulation of telemedicine implemented by the government, propose initiative preparations for the implementation of telemedicine policies, and suggest implications for the basic conditions and direction of the deregulation of telemedicine. Recently, deregulation policy cases in telemedicine include that designation of a special zone for regulatory freedom in Gangwon Province, allowing physician-patient telemedicine and telephone counseling and prescription cases in the COVID-19 crisis. There are four main issues that could arise with the deregulation of telemedicine: safety, effectiveness, differences in access to health care and the economic industry, and legal responsibility. As a initiative preparation, this study proposed a pilot project for telemedicine and enhanced support for face-to-face care complementary tools, vitalizing remote co-operation, policy model that do not disrupt the medical delivery system, and legal maintenance. In conclusion, as a suggestion of basic premise and direction in the implementation of telemedicine deregulation, the implementation of initiative measures to address issues concerning telemedicine, the review and regulation of conditions to be considered in the implementation of telemedicine, and the establishment of a close communication and cooperative sturcture with medical providers.

• (The)Study of the Eastern Classic
• /
• no.41
• /
• pp.477-516
• /
• 2010

The Korean art history academia has lately been carrying out active research on the Korean art market and art collectors. This area of research is significant in that it attempts to overcome the limitations of previous research trends focused on tracing back and analyzing preeminent masters, their schools and their influence, and approach new subject matters such as art and society, circulation and consumption of art works, which were unapproachable with previous research methods. This paper examines the life, artwork and art collection activities of Songeun(松隱) Yi Byeong-jik(李秉直: 1896-1973), an outstanding painter, calligrapher and art collector during the Japanese colonial period. The primary purpose of this paper is to advance the research project the author has recently initiated on modern Korean art collectors by reconstructing parts of this major art collector's individual lifestyle and to generally identify the art collection activities and the art works that he kept. Yi Byeong-jik, one of the preeminent art collectors during the colonial period, disposed his voluminous collection through two auctions in 1937 and 1941, and then held another auction two weeks before the onset of the Korean War on June 25, 1950 to sell off the remaining works. It seems that the reason why Yi had auctioned off his collections was for the purpose of investing in education. The tale that Yi safely kept 'Sam-guk-yu-sa(三國遺事),' which is considered a national treasure, even through the time of turbulence is evidence of his exemplary behavior as a model art collector. He may be one of the best examples of what an art collector should be in terms of giving back to the society and preserving things of beauty and value. However, one factor that limited and defined Yi's life was that he was a eunuch. This aspect of his life could be pointed out as the biggest factor that stopped him from becoming a mainstream participant in the art world despite his influence as a great painter, calligrapher, significant art collector, and discerning connoisseur.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.100-118
• /
• 2021

In this study, PM accidents (1,603case) and bicycle accidents (14,672case) that occurred in the last three years were analyzed to determine the characteristics of PM traffic accidents. In particular, PM traffic accidents were divided into perpetrators and victims to determine the characteristics in detail. For PM accidents, the analysis was conducted on the status of each road grade, road type, weather condition, accident type, day and night occurrence, and vehicle type. The number of PM accidents that occurred in 2019 increased by 129%, and deaths increased by more than 200% compared to the previous year. The proportion of pedestrian accidents among PM traffic accidents was higher than that of bicycle accidents. Therefore, regulations on PM traffic are necessary. For the 20 deaths of PM, a detailed analysis was conducted to analyze the factors of traffic accidents. PM fatalities occurred in 50% of vehicle accidents, and 7 out of 10 vehicle accidents occurred at night. This is believed to have been caused by falling or overturning due to an obstacle, such as a depression in the road pavement or a speed bump.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2021

Concrete structures gradually age due to deterioration of materials or excess loads and environmental factors, and their performance decreases, affecting the usability and safety of structures. Although external tension construction methods are widely used among the reinforcement methods of old bridges, it is insufficient to identify the effects and effects of reinforcement depending on the level of aging. Therefore, in this study, a four-point loading experiment was conducted on the subject with the non-reinforced and external tensioning method to confirm the reinforcement effect of the external tensioning method, assuming the aging of the structure as a reduction in the compressive strength and tensile reinforcement of concrete, to analyze the behavior of the reinforcement and confirm the reinforcement effect. As a result of the experiment, it was difficult to identify the amount of reinforcement in the extreme condition due to early elimination of the anchorage. Therefore, compliance with the regulations on anchor bolts is required when applying the external tension reinforcement method. Crack load and yield load increased depending on whether external tension was reinforced, but before the crack, the stiffness before and after reinforcement was similar, making it difficult to confirm the reinforcement effect.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.160-172
• /
• 2022

The design regulations for simple explosive storage in Korea only stipulate standards for the materials and thickness of the wall of the structure because the amount of explosives that can be stored is small. There is concern about secondary damage during an internal explosion in a simple storage facility, and it is necessary to reexamine the current standards. The numerical analysis for the TNT 15 kg explosion inside the simple storage was carried out by setting the factors using the robust experimental design method. The displacement of the structure generated under the same time condition was analyzed, and the contribution was evaluated. The contribution of concrete thickness was the highest, and the contribution of concrete strength and rebar arrangement was lower than that of concrete thickness. The reinforcement diameter contributed extremely little to the displacement. The structural standards of the simple storage that are currently applied are insufficient on blast resistance, and it is necessary to present new design standards. Therefore, the design factor to be applied later analysis and actual experiments were taken into consideration. For the design variables, the thickness of the concrete was 15 cm considering the displacement, the concrete strength was selected as general concrete considering the inlet discharge pressure, the factor with the lowest average displacement was selected for the reinforcement arrangement and the diameter of the reinforcement, the factor with the smallest level was selected in consideration of economic feasibility because the difference in displacement was low.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.2
• /
• pp.85-94
• /
• 2022

Construction industry is facing difficult challenges in terms of productivity, manpower, and industrial accidents. Currently, along with the 4th Industrial Revolution, various high-tech technologies are emerging, and efforts are being made to solve the problem by applying the technologies related to the 4th Industrial Revolution to the construction industry. As part of these efforts, research is being conducted to develop a construction equipment control system to increase productivity and safety at earthworks sites where many and various types of construction equipment are involved, and the system needs a function to increase productivity by optimizing the moving path of construction equipment. In the case of trucks, the location of the temporary road must be optimized in order to optimize the path of movement in the construction site. However, only matters related to the quality standard of temporary roads have been suggested so far, and there is no standardized process for efficiently determining the location of temporary roads. In this paper, the factors and its importance related to the location of the temporary road were identified through field surveys and interviews with experts, and a method for determining the location of the temporary road was presented. It was confirmed that the suggested method through a case study could improve the productivity of earthwork.

• Food Science and Industry
• /
• v.55 no.1
• /
• pp.58-73
• /
• 2022

Due to the recent demand for low-calorie foods, consumers are looking for alternative sweeteners that can control blood sugar, low risk of tooth decay and low calories. Regulations for permitted sweeteners in food vary from every country, and it is important for the government and the food industry to monitor products containing these sweeteners to ensure global compliance. Therefore, rapid, precise, and accurate analysis for food matrices should be applied to quality control, market surveillance, monitoring, and evaluation of food additive intake in the food industry. To analyze sweeteners simultaneously, it is essential to develop an efficient and rapid analytical method and to perform appropriate pretreatment steps such as solvent extraction and purification. This study presented the recent analysis trends about the suitable extraction method for food matrices focusing on non-nutritive sweeteners. Additionally, techniques for multi-compounds analysis using HPLC and LC-MS/MS and non-destructive analysis techniques using FT-IR were comprehensively described.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.2
• /
• pp.147-155
• /
• 2022

From March to August 2021, a total of 66 lip makeup products were collected from Seoul to measure the contents of lead, arsenic, cadmium, antimony, and nickel, and compared by product type (lip gloss, lip balm and lip tint), production area (domestic and imported), and user (for adults and children). The average metal contents were as follows; 0.284 ㎍/g for lead, 0.020 ㎍/g for arsenic, 0.003 ㎍/g for cadmium, 0.004 ㎍/g for antimony and 0.415 ㎍/g for nickel. The results of lip cosmetics were below the recommended maximums in regulations on safety standards for cosmetics of Ministry of Food and Drug Safety.

• The Korean Society of Law and Medicine
• /
• v.23 no.2
• /
• pp.119-139
• /
• 2022

Brain stimulation technology that administers electrical and magnetic stimulation to a brain has shown a significant level of possibility for treating a wide range of various neurological and psychiatric disorders. Depending on its nature, the technology is defined either as invasive or non-invasive, and deep brain stimulation (DBS) is one of the most well-known invasive brain stimulation technologies. Currently categorized as grade 4 medical device in accordance with Guideline On Medical Devices And Their Grades, a Notification of Ministry of Food and Drug Safety (MFDS), the DBS has been used as a stable treatment for several diseases. At the same time, the DBS technology has recently achieved substantial advancement, encouraging active discussions for its use from various perspectives. On the contrary, debates over legal regulation related to the use of DBS has relatively been smaller in numbers. In this context, this article aims to 1) introduce the DBS technology and its safety in setting out the tone; 2) touch upon major legal issues that would potentially rise from its use for four different purposes of treatment, clinical study, areas of non-standard treatment where no other methods are available, and enhancement; and finally 3) highlight disputes concerning common emerging issues observed in the aforementioned four purposes from the viewpoint of legal responsibility and liability of using the DBS, which are benefit-risk assessment, physicians' duty of information, patients' capacity to consent, control for device, and insurance coverage.