• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.157-163
• /
• 2021

This study attempted to find individual reasons for inducing cybercrime. The survey was conducted targeting investigators and security experts on 11 types of cybercrime. There are 16 internal factors that cause crime and classified according to Maslow's 5 steps. As a result of the survey on a total of 176 items, the credibility of the Cronbach's Alpha coefficient was 0.925. The result of the factor analysis is as follows. Factor analysis results are maslow phase 1 physiological desire is commercial, sykes. Phase 2 safety desires are not punishable and crowd. The three-stage social desire is impulsiveness, indifference, etc. The fourth stage of respect is anonymity and honor. The desire for self-reality in stage 5 has been reduced to indesity, a loss of moderation, morality, and media effects. In conclusion, the physiological desire, the desire for respect for the crime of infringing on the information and communication network, the desire for menstruation, the desire for self-realization for the crime of using information and communication networks, the desire for self-actualization for the crime of illegal content. It was in the order of desire.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.222-229
• /
• 2012

This study was carried out to evaluate the residual characteristics of azoxystrobin in fresh ginseng and calculate its processing factors in processed products, such as dried ginseng, red ginseng and their extracts. Azoxystrobin was sprayed annually onto four-year-old ginseng according to its pre-harvest interval (PHI) for two years. Harvested ginsengs were processed according to the commercially well-qualified conventional methods provided by the Korea Ginseng Corporation. Limits of detection (LODs) of azoxystrobin in fresh ginseng and its processed products were 0.001 and 0.002 mg/kg, respectively. Also limits of quantitation (LOQs) in fresh ginseng and its processed products were 0.003 and 0.007 mg/kg, respectively. Recoveries of the analytical methods in fresh ginseng and its processed products ranged from 69.3 to 114.8%. Highest residue amounts in fresh ginseng and its processed products were 0.025 and 0.118 mg/kg, respectively. Processing factors of the processed products ranged from 1.85 to 3.17 in four-year-old ginseng and from 2.48 to 5.84 five-year-old ginseng.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.478-489
• /
• 2010

Penthiopyrad is a fungicide agent in types of pyrazole which is showing the effect of prevention in fungal disease and powdery mildew. In order to register this new pesticide, reports of acute toxicity and chronic toxicity by animal study were examined to set acceptable daily intake to evaluate hazards of consumers. Acute toxicity was low in toxic, and it did not have the effect of acute dermal toxicity, acute eye irritation, or skin sensitization. As the result of the study in chronic toxicity, the common effect of chemical appeared in the liver and thyroid which was proven as a toxic effect. Two-generation reproduction toxicity, genotoxicity, and prenatal development toxicity were not proven. As the result of carcinogenic study, increase of thyiroid follicular adenoma in the rat and the frequency of liver hepatocellar adenoma in mice were also increased. However, it was decided that the threshold value on the effect in chemicals could be controlled through study liver enzyme induction. Therefore, the ADI for penthiopyrad is 0.081 mg/kg/ bw/day, based on the NOAEL of 8.10 mg/kg bw/day of twelve-months dogs study and applying an uncertainty factor of 100.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.347-360
• /
• 2015

Trace metals(As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Pb and Zn) concentrations in surface sediments of Jinhae bay in August of 2013 were measured to investigate the characteristics of trace metals distribution and to evaluate the metal pollution. Assessment for metal pollution was carried out using the sediment quality guidelines(SQGs) such as threshold effects level(TEL) and probable effects level(PEL) proposed by the ministry of onceans and fisheries(MOF) in Korea and geochemical assessment techniques(enrichment factor(EF) and geoaccumulation index ($I_{geo}$)). The mean concentration of trace metals in the sediments are as follows: 11.1 mg/kg for As, 0.52 mg/kg for Cd, 14.1 mg/kg for Co, 69.8 mg/kg for Cr, 57.2 mg/kg for Cu, 3.7 % for Fe, 0.064 mg/kg for Hg, 600 mg/kg for Mn, 40.1 mg/kg for Pb, 167.2 mg/kg for Zn. The spatial distributions of As, Co, Cr and Fe were not distinguished clearly in whole area. However, Cd, Hg, Pb and Zn were high in northern area of bay, and Cu and Mn were high in southeastern and eastern area of bay, respectively. The distribution pattern of trace metals, correlation matrix and R-mode factor analyses results revealed that the distribution of trace metals were mainly effected by the sediment grain size(Co, Cr and Fe), redox condition of sediments(Mn) and anthropogenic factors(As, Cd, Cu, Hg, Pb and Zn). Comparing the concentrations of several trace metals(As, Cd, Cr, Hg and Pb) with SQGs from Korea(TEL and PEL), the concentrations of Hg, Cd and Pb in sediment of northern area of bay were higher than TEL. EF and $I_{geo}$ values of As, Cd, Cu, Hg, Mn, Pb and Zn showed that these metals in sediments are enriched by anthropogenic activities in some areas, and pollution status for Cd, Hg and Pb in northern area and Cu in southeastern area of bay were concerned about current level, although those for As, Mn and Zn were not.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.137-143
• /
• 2000

The present study was performed to investigate the bioconcentration of phosphamidon and profenofos. The BCFs(bioconcentration factors), depuration rate constants and LC$_{50}$ for two pesticides in zebrafish(Brachydanio rerio) were measured by the flow-through system(OECD guideline 305). The results obtained are summarized as follows: The 24-hrs LC$_{50}$, 48-hrs LC$_{50}$, 72-hrs LC.n and 96-hrs LC$_{50}$ were more than 100 mg/l for phosphamidon. The concentration of phosphamidon in zebrafish reached an equilibrium in 12 hrs at low and high concentrations(0.2 mg/l and 1 mg/1). The average BCF values of phosphamidon were less than 1 at low(0.96, n=7) and high concentrations (0.89, n=7) after 12~168 hrs. Depuration rate constants of phosphamidon were 0.18 hr-1 and 0.21 hr-1, half-life of phosphamidon were 3.85 and 3.30 at low and high concentrations(0.2 mg/l and 1 mg/l), respectively, The concentrations of phosphamidon in zebrafish at low and high concentrations were rapidly decreased after 8(0.04 $\mu\textrm{g}$/g) and 12 hrs(0.07 $\mu\textrm{g}$/g). The 24-hrs LC$_{50}$, 48-hrs LC$_{50}$, 72-hrs LC$_{50}$ and 96-hrs LC$_{50}$ were 2.9, 2.6, 2.2 and 2.0 mg/1 for profenofos. The concentration of profenofos in zebrafish reached an equilibrium in 12 hrs at five-hundredth and one-hundredth concentration of 96-hrs LC$_{50}$(0.004 mgA and 0.02 mg/1). The average BCF values of profenofos were 141.9(n=7) and 111.3(n=7) at five-hundredth and one-hundredth concentration of 96-hrs LC$_{50}$(0.004 mg/l and 0.02 mg/1) after 12~168 hrs. Depuration rate constants of profenofos were 0.09 hr$^{-1}$ and 0.10 hr$^{-1}$, half-life of profenofos were 7.70 and 6.93 at five-hundredth and one-hundredth concentration of 96-hrs LC50(0.004 mg/l and 0.02 mg/1), respectively. The concentrations of profenofos in zebrafish at five-hundredth and one-hundredth concentration of 96-hrs LC$_{50}$ decreased agter 8(0.18 $\mu\textrm{g}$/g) and 12 hrs (0.19 $\mu\textrm{g}$/g). The LC$_{50}$ value in zebrafish showed that acute toxicity of profenofos was higher than that of phosphamidon. The BCF values of profenofos were 100 times higher than those of phosphamidon, and depuration rate of phosphamidon was two times faster than that of profenofos.

• Clean Technology
• /
• v.26 no.3
• /
• pp.161-167
• /
• 2020

For the design of the prevention and mitigation measures in process industries involving flammable substances, reliable safety data are required. An important property used to estimate the risk of fire and explosion for a flammable liquid is the flash point. Flammability is an important factor to consider when developing safe methods for storing and handling solids and liquids. In this study, the flash point data were measured for the binary systems {2-butanol + 2,2,4-trimethylpentane}, {2-butanol + methylcyclohexane} and {2-butanol + toluene} at 101.3 kPa. Experiments were performed according to the standard test method (ASTM D 3278) using a Stanhope-Seta closed cup flash point tester. A minimum flash point behavior was observed in the binary systems as in the many cases for the hydrocarbon and alcohol mixture that were observed. The measured flash points were compared with the predicted values calculated via the following activity coefficient (GE) models: Wilson, Non-Random Two-Liquid (NRTL), and UNIversal QUAsiChemical (UNIQUAC) models. The predicted data were only adequate for the data determined by the closed-cup test method and may not be appropriate for the data obtained from the open-cup test method because of its deviation from the vapor liquid equilibrium. The predicted results of this work can be used to design safe petrochemical processes, such as the identification of safe storage conditions for non-ideal solutions containing flammable components.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.55-63
• /
• 2002

It has been known well that Traffic Conflict Technique(TCT) used to evaluate the safety of intersections in the case of shortage of traffic accidents data and surveying time. Because data for using in traffic conflict technique that is collected by trained surveyors, it is rely on the knowledge, experience and the characteristics of them. The data of surveying generate varying result. So, its variance must minimize and then it is considered of calculating in traffic conflict technique however obviously technique to minimize has not developed until now. So, this paper has a focus on the technical method to minimize the variance. For this, it applied the fuzzy reasoning theory to the existed traffic conflict technique that is the most comprehensive method in the country and then developed the new traffic conflict technique model. Fuzzy reasoning theory is a very appropriate method for minimizing the variance among surveyors because it can systematically calculate the uncertainty of surveyors by approximation reasoning structure. The result of analysis from pilot study, the new Procedure in this Paper minimized the variance by 53 Percentiles and it increased the value of conversion factor two times than the exited traffic conflict technique. The method proposed in this paper, it can be used for evaluating the safety of intersection, and before and after analysis of improving Project of black spots.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.89-96
• /
• 2018

In this paper, we proposed a parametric estimation method for estimating H/W cost by using the development data of professional service robot in Korea. In addition, we derived the factors and weights that we can estimate the costs depending on the application environmental conditions of the robot. For the analysis, we developed the equation of professional service robot cost estimation using parametric method. We also derived the adjustment factors and following weights through FGI and Delphi for environmental conditions. We have developed a cost estimation equation that reflects the weight, volume, and manufacturing difficulty, and can derive a relational equation that reflects the environmental factors(dust/water, heat/cold, safety, test, technology innovation). This provides an objective basis for estimating the cost of professional service robots and will lead to ongoing research for estimating the H/W development cost of professional service robots. In the future, we will increase reliability by collecting abundant data, and will strengthen models through finding functional factors.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1090-1097
• /
• 2006

The anoxic activated sludge process was applied to the treatment of industrial box-mill wastewater, which exhibited the high removal efficiencies of $90{\sim}94%$$ TCOD_{Mn}$ and $58{\sim}81%$ Color. For the design of industrial anoxic activated sludge process, Monod bio-kinetic coefficients of box-mill wastewater were estimated as follows: $K_{max}$(maximum specific substrate removal rate)=0.52 $day^{-1}$, $K_s$(half saturation constant)=314 mg/L, $K_d$(decay coefficient)=0.274 $day^{-1}$, y(microbial yield coefficient)=0.908 mg/mg, and ${\mu}_{max}$(maximum specific growth rate)=0.472 $day^{-1}$. Space loading factors for the design analysis were practically determined as the values of F/M ratio=$0.043{\sim}0.07$ kg-$TCOD_{Mn}$/kg-SS-day, BOD space loading=$0.18{\sim}0.3$ kg-$TCOD_{Mn}/m^3-day$, and ${\theta}_x=6.8{\sim}26.4$ day when considering the relationship of these loading factors with growth dynamics of microorganisms, the F/M ratio that is inversely proportional to ${\theta}_x$ should be equivalent to ${\mu}_{max}$ in units, but exhibited the significant difference between theses two values. Therefore, it is considered that high safety factors are requested in the design of anoxic activated sludge process that is based on Monod bio-kinetics of microorganism.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.531-541
• /
• 2020

In this study, a computed tide of a real tide was introduced to improve the numerical solutions for tides and tidal flow simulations. The real tide was defined considering the nodal modulation amplitude, phase correction factor, astronomical argument, and tidal harmonic constants of all the constituents. The numerical simulation was performed using the real tide parameters for the west-south coastal waters of Korea, where the observation data for tides, tidal currents, waves, and winds over two seasons exist. The tidal flow simulation of the real tide was simulated successfully. The correlation coefficient between the observed and calculated values was 1.0, which indicated both accurate amplitude and phase. The U- and V-components of the tidal current obtained for the real tide had average valid correlations of 0.83 and 0.936, respectively. The speed error for the residual current was 0.006 m/s on the average, which indicated an insignificant difference, and the directional behavior of the residual current was very similar. In addition, the velocity error was attributed to various weather effects, such as high waves and wind storms. Therefore, this model is expected to improve current solutions provided that weathering forces, such as waves and winds, are considered.