• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1266-1269
• /
• 2003

Many studies have indicated that most of a product's cost is fixed early in its lift cycle, before the original design cycle is complete. This implies that we should consider various aspects of product lift cycle at the design stage. This means the need of collaboration in design stage. Because the Internet provides instant access to a wealth of design information, the Internet is used by the collaborative design team members as a medium to share data, information and knowledge, and in some cases for product data management and project management by integrating the Web with appropriate technologies. This paper presents a real-time collaborative design system for powerful interaction performance, based on the Internet and Web technologies. Using The system use the client/server architecture and the purpose of the system is to provide a method that enables real-time view, review and modification of the 3D model through the Internet.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.53-60
• /
• 2003

This paper explores the governing differential equations for the non-linear behavior of shear deformable simple beam with a concentrated load. In order to apply the Bernoulli-Euler beam theory to simple beam, the bending moment equation on any point of the elastica is obtained by concentrated load. The Runge-Kutta and Regula-Felsi methods, respectively, are used to integrate the governing differential equations and to compute the beam's rotation at the left end of the beams. The characteristic values of deflection curves for various load parameters are calculated and discussed

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.689-696
• /
• 2006

This paper deals with the geometrical non-linear analyses of the buckled columns. Differential equations governing elasticas of the buckled columns are derived, in which both effects of taper type and shear deformation are included. Three kinds of taper types such as breadth, depth and square tapers are considered. Differential equations are solved numerically to obtain the elasticas and buckling loads of such columns. End constraint of both clamped ends and both hinged ends are considered. The effects of shear deformation on the elastica of the buckled column and buckling load of column are investigated extensively. Experimental studies are presented that complement theoretical results of non-linear responses of the elasticas.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.61-66
• /
• 2010

The objective of this paper is to study the usability of the ingress/egress of elderly people, and analyze the physiological workload electromyography (EMG). We investigated the factors of discomfort while the elderly people are using the ingress/egress. Experiments were performed using a seating buck with 22 elderly participants (over 65 years old). The results showed that different muscles are activated during ingress and egress. A system called "easy access" was found which helps to access easily when a driver gets into a car. The current easy access was compared a newly proposed one. It was found that elderly people use less muscle during in/egress in the new easy access system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.866-869
• /
• 2000

The finishing process for die is an important process because it has influence on final quality of products. And it is difficult to automatize finishing process so that the process has depended on expert's skill until now. However, recently a study on development of die automatic finishing machine has been progressed, and actually this machine is applied to fabrication of die. But die automatic finishing machine has the problems such as low supply rate and high machine price. In this paper 3-axis machine was applied to the die finishing. And to improve form accuracy of die finishing path was regenerated. The finishing path considered tilting of finishing tool. and variation of machining force with contacting point between finishing and workpiece.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.854-857
• /
• 2000

Chemical Mechanical Polishing(CMP) has been accepted as one of the essential processes for VLSI fabrication. However, as the polishing process continues, pad pores get to be glazed by polishing residues, which hinder the supply of new slurry. This defect makes removal rate decrease with a number of polished wafer and the desired within-chip planarity, within wafer and wafer-to-wafer nonuniformity are unable to be achieved. So, pad conditioning is essential to overcome this defect. The eletroplated diamond grit disk is used as the conventional conditioner, And alumina long fiber, the .jet power of high pressure deionized water and vacuum compression are under investigation. But, these methods have the defects like scratches on wafer surface by out of diamond grits, subsidences of pad pores by over-conditioning, and the limits of conditioning effect. To improve these conditioning methods. this paper presents the Characteristics of Ultrasonic conditioning aided by cavitation.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.25-32
• /
• 1983

To obtain basic information on the breeding of burley tobacco, classification of 41 varieties was carried out by using the cluster analysis of correlation coefficients and taxonomic distance based on twenty-one agromonic characters. Eight characters, such as days to flowering, length of flower axis, internode length, leaf length, yield, leaf angle to stem, vein angle to midrib and plant height, were useful in monothetic classification. Forty-one varieties were classified into four groups (I, II, III and IV) with weighted variable group method (WVGM ) and weighted jai. group method(WPGM), whereas the results classification of 33 varieties among them by WVGM were coincident with the results by WPGM. As for the characteristics of each group, group I related to late maturity, tall height and high yield, group II related to intermediate maturity, tall height and low yield, group 19 related to early maturity, intermediate height and low yield, and group W related to early maturity, short height and intermediate yield.

• 한국연초학회지
• /
• 제4권1호
• /
• pp.37-42
• /
• 1982

Korean local and introduced varieties were classified by the cluster analysis of correlation and taxonomic distance based on nineteen growth characters. 1. Thirty six varieties can be classified into three groups(I, II, III) by WVGM (weighted variable group method) 2. Major characters for classifying cultivars were days to flowering, number of leaves, leaf length, stem diameter and width of midrib: the five characters seemed to be useful in monothetic classification. 3. Korean varieties were similar to oriental, and japanese varieties to taiwan. 4. WVGM was more accurate and meaningful than classification by WPGM (weighted paired group method) and reticulate diagram of correlation. 5. Characteristics of each group: Group I closely related to many leaves, late of maturity and broad leaf type, Group II related to medium leaves, late of maturity and narrow leaf type, Croup 19 related to few leaves, early of maturity and medium leaf type respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.46-47
• /
• 2008

전력산업은 국가경제 및 국민생활의 기반이 되는 기간산업으로서 그 역할이 중대하므로 계통운영자는 적정 예비력을 확보하여 양질의 전기를 안정적이고 효율적으로 공급해야 한다. 그러나, 계통규모의 지속적인 증가와 전력수급의 지역적 편중 가속화로 국내 여건은 갈수록 악화되고 있는 실정이다. 또한, 현행 예비력 기준은 계통규모와는 상관없이 정량적으로 확보하게 되어 있으며 예비력 소진시 재 확보해야 할 기준도 마련되어 있지 않다. 따라서, 본 논문에서는 지역적 계통특성을 반영하고 항목별 예비력 기준을 세분화하여 보다 체계적인 예비력 운영기준을 제시하고자 한다.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.60-67
• /
• 1995

Ocassionally, many chemical plants experienced unexpected shutdown and suffered serious economic loss caused by boiler accidents due to mis-operations during the start-up or shutdown. A strategy to prevent such accidents is proposed here by using the form of frame for the recognition of all needed conditions, i.e., the states of the boiler, hazardous or dangerous conditions, each level conditions, transition network and heuristic knowledge of human operators. The expert system based on this strategy is considered to be an available method to predict all of the hazardous conditions in boiler plants.