• 한국추진공학회지
• /
• 제15권4호
• /
• pp.85-93
• /
• 2011

아크 채널 모델을 이용하여 플라즈마 온도를 매개로 플라즈마 입력전력과 전류 조건에 따른 간극 반지름(R) 및 간극팩 묶음 길이(L) 변수 계산이 가능한 해석해를 유도하고 이를 이용하여 300 A 전류조건에서 0.4 MW 급 분절형 아크 플라즈마 토치에 대한 해석적 설계 변수 해석을 수행하였다. 해석 결과, R��${\leq}$ 7.5 mm, L ${\leq}$ 1.25 m 인 범위에 대해, L이 길어지거나 R이 작아질 때, 플라즈마 온도는 비례하여 증가하는 경향을 가지고 있음을 알 수 있었으며, 그 이상의 범위에서는 증가하다 감소하는 비선형 현상이 존재하여 주어진 전류 및 전력조건에서 아크 플라즈마의 형성이 불가능하거나 불안정할 것으로 예측되었다. 이와 같은 결과를 바탕으로 입력전류가 300 A 일 때, 아크 플라즈마 온도를 안정적으로 구현할 수 있을 것이라 여겨지는 0.4 MW 급 분절형 아크 플라즈마 토치의 간극 반지름 R 및 간극팩 묶음 길이 L의 설계범위를 각각 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm, 0.25 m ${\leq}$ L ${\leq}$ 0.5 m 범위로 제안하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.768-774
• /
• 2010

아크 채널 모델을 이용하여 플라즈마 온도를 매개로 플라즈마 입력전력과 전류 조건에 따른 간극 반지름(L) 및 간극팩 묶음 길이(R) 변수 계산이 가능한 해석해를 유도하고 이를 이용하여 300 A 전류조건에서 0.4 MW 급 분절형 아크 플라즈마 토치에 대한 해석적 설계 변수 해석을 수행하였다. 해석 결과, L < 1.25 m, R < 7.5 mm 에 대해, 고정된 R 값에서 L이 길어지거나 반대로 L 값이 일정할 때, R이 작아질수록 플라즈마 온도는 비례하여 증가하는 경향을 가지고 있음을 알 수 있었으며, 그 이상의 범위에서는 만족하는 플라즈마 온도 해가 없거나 2개 이상 존재하여 주어진 전류 및 전력조건에서 아크 플라즈마의 형성이 불가능하거나 불안정할 것으로 예측되었다. 이와 같은 결과를 바탕으로 입력전류가 300 A 일 때 약 15,000 K의 아크 플라즈마 온도를 안정적으로 구현할 수 있을 것이라 여겨지는 0.4 MW 급 분절형 아크 플라즈마 토치의 간극 반지름 R 및 간극팩 묶음 길이 L의 설계범위를 각각 $5.5mm{\leq}R{\leq}7.0mm$, $0.5m{\leq}L{\leq}1.0m$ 범위로 제안하였다.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.36-41
• /
• 2009

An experimental investigation was conducted to examine the fluid flow resistance in the rectangular channel with two inclined wire screen baffles. Two different types of wire screens; dutch weave and plain weave, were used as baffle devices in this experiment. Three kinds of baffles with different mesh specifications were made up of dutch type and four different kinds of baffles were made up of plain weave type. The stainless steel wire screen baffles were mounted on the bottom wall with varied angle inclination. Reynolds numbers were varied from 23,000 to 57,000. Results show that the mesh number of baffles plays an important role on friction factor behaviour. It is found that the baffle with the most number of meshes (type SA) has the highest fluid flow resistance.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.26-31
• /
• 2008

This experimental study investigates the local heat transfer enhancement characteristics and the associated frictional head loss in the rectangular channel with a single inclined baffle. Four different types of the baffle are used. The inclined baffles have the width of 19.8 cm, the square diamond of $2.55cm{\times}2.55cm$, and the inclination angle of 5o, and number of holes of up to 9. Reynolds number is varied between 23,000 and 57,000. Results show that the heat transfer and friction factor depend significantly on the number of baffle holes and Reynolds number. The friction factor decreases with increasing Reynolds number and the number of holes on the baffle. It is found that the heat transfer performance of baffle type II(3 hole baffle) has the best values.

• 대한기계학회논문집B
• /
• 제31권11호
• /
• pp.912-917
• /
• 2007

Regionally averaged heat transfer distributions and friction factors in square channels with twisted tape inserts and with twisted tape inserts plus interrupted ribs are experimentally investigated. The effects of surface heating condition on heat transfer enhancement are also investigated. Each wall of the square channel is composed of isolated aluminum plates. The interrupted square ribs are arranged along the axial flow direction on the bottom wall only. Experimental tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The results are compared with those of previous investigations for circular tube with axial interrupted ribs and twisted tape inserts.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권6호
• /
• pp.273-284
• /
• 2002

In this paper, computer simulations of the physical Phenomena occurring in the arc region before and after current zero were carried out to evaluate the dielectric recovery characteristics of two types of double-flow nozzles. A commercial CFD Program "PHOENICS" is used for the simulation and the user-coded subroutines to consider the arcing phenomena were added to this program by the authors. The computed results were verified by the comparison with the test results presented by the research group of BBC. In order to investigate the state of the arc region after current zero, the simulation was carried out with four steps. They are cold gas flow analysis, steady state arc simulation, transient arc simulation before current zero, transient hot gas flow simulation after current zero. The semi-experimental arc radiation model is adapted to consider the radiation energy transport and Prandtl′s mixing length model is employed as the turbulence model. The electric field and the magnetic field were calculated with the same grid structure used for the simulation of the flow field. The streamer criterion was introduced to evaluate the dielectric recovery characteristics after current zero. Compared with the results obtained by assuming the current zero state in the former studies, it has been found that the results obtained by considering the state before current zerowere more accurate.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.11-17
• /
• 2009

The heat transfer characteristics of flow through two inclined wire-mesh baffles in a rectangular channel were investigated experimentally with varying the mesh number of wire screens and inclination angle of the baffles. Two different types of wire meshes such as dutch and plain weaves, were used in this experiment. Three kinds of baffle plates with different mesh specifications in the dutch weave and four different kinds in the plain weave were manufactured. Baffles were mounted on bottom wall with varied angles of inclination. Reynolds number was varied from 23,000 to 57,000. It is found that the placement of inclined wire-mesh baffles in the channel affects the heat transfer characteristics by combining both jet impingement and flow disturbance. The wire screen modified the flow structure leading to a change in the heat transfer characteristics. The results show that the baffle plate with the most number of mesh (type SA) has the highest heat transfer rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2402-2407
• /
• 2007

Heat transfer distributions and friction factors in square channels (3.5 ${\times}$ 3.5 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. Tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The rib height-to-channel hydraulic diameter, e/Dh, is kept at 0.057 and test section length-to-hydraulic diameter, L/Dh is 30. The twisted tape is 0.1 mm thick carbon steel sheet with diameter of 3.3cm, length of 90cm, and 2.5 turns. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. Each wall of the square channel is composed of isolated aluminum sections. The following conclusions from the experimental study were drawn as: 1) In the 4 heating wall channel with twisted tape inserts, Nusselt number based on bottom wall temperature is enhanced by 1.2 - 1.6 times if adding the axial interrupted ribs on the bottom wall only. 2) The twisted tape with interrupted ribs under the two-sided heating condition produces the highest heat transfer performance. 3) Friction factor data obtained for the square channel with twisted tape inserts plus axial interrupted ribs are less than those in the past publications for circular tubes with axial interrupted ribs and twisted tape inserts.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.117-120
• /
• 2008

Numerical simulations and experiment of a hydrodynamic and thermally developed turbulent flow through square ducts (3.0 ${\times}$ 3.0 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are conducted to investigate regionally averaged heat transfer and friction factors. Turbulent swirl flows having Reynolds numbers ranging from 8,900 to 29,000, a rib height-to-channel hydraulic diameter(e/D$_h$) of 0.067, and a length-to-hydraulic diameter(L/D$_h$) of 30, are considered. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape has 0.1 mm thick carbon steel sheet with diameter of 2.8 cm, length of 90 cm, and 2.5 turns. Each wall is composed of isolated aluminum sections, and two cases of surface heating are set. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and square ducts with twisted tape inserts plus interrupted ribs produces the best overall transfer performance.

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.595-603
• /
• 2016

우리나라에서는 재난안전통신망(PS-LTE) 주파수로 철도망(LTE-R)에 이미 지정되어 있는 700 MHz 대역이 할당되었다. 따라서 동일채널간섭으로 인한 아웃티지를 줄이고 수율을 높이기 위한 연구가 필요하다. 본고에서는 안전망과 철도망이 공존하는 LTE-R 네트워크 다운링크 환경에서 RAN 공유시와 비 RAN 공유시, 또한 협력통신(CoMP)을 적용시와 미적용시에 PS-LTE UE 수율의 향상과 LTE-R UE 아웃티지 감소를 비교 분석한다. PS-LTE 와 LTE-R 네트워크의 공존 시나리오를 수행방법에 기반하여 네가지로 구분하고, 각각의 시나리오별로 UE의 아웃티지와 평균 수율을 측정한다. 열차제어신호는 최상위 MCS (mission critical service)에 해당되기에, PS-LTE UEs가 LTE-R 네트워크의 RAN 공유시, LTE-R UE에 더 높은 우선권을 주어 자원을 할당한다. RAN 공유 환경에서 협력통신인 CS CoMP를 적용하는 경우, 최고의 수율과 최소의 UE 아웃티지 성능을 보임을 알 수 있다.