References
- Han, J. C., 1984, 'Heat Transfer and Friction in Channels with Two Opposite Rib-roughened Walls,' ASME J. Heat Transfer, Vol. 106, pp. 774-781 https://doi.org/10.1115/1.3246751
- Han, J. C., Park, J. S. and Lei, C. K., 1985, 'Heat Transfer Enhancement in Channels with Turbulence Promoter,' ASME J. Engineering for Gas Turbines and Power, Vol. 107, pp. 628-635 https://doi.org/10.1115/1.3239782
- Han, J. C., Ou, S., Park, J. S. and Lei, C. K., 1989, 'Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators,' Int. J. Heat Mass Transfer, Vol. 32, pp. 1619-1630 https://doi.org/10.1016/0017-9310(89)90044-6
- Lau, S. C., McMillin, R. D. and Han, J. C., 1991, 'Turbulent Heat Transfer and Friction in a Square Channel with Discrete Rib Turbulators,' ASME J. Turbomachinery, Vol. 113, pp. 360-366 https://doi.org/10.1115/1.2927884
- Lau, S. C., McMillin, R. D. and Han, J. C., 1991, 'Heat Transfer Characteristics of Turbulent Flow in a Square Channel with Angled Discrete Ribs,' ASME J. Turbomachinery, Vol. 113, pp. 367-374 https://doi.org/10.1115/1.2927885
- Kukreja, R. T., Lau, S. C., McMillin, R. D. and Chandra, P. R., 1991, 'Effects of Length and Configuration of Transverse Discrete Ribs on Heat Transfer and Friction for Turbulent Flow in a Square Channel,' ASME/JSME Thermal Engineering Joint Conference, Vol. 3, pp. 213-218, Reno, Nevada
- Choi, C., Rhee, D. H. and Cho, H. H., 2002, 'Heat/Mass Transfer and Pressure Drop in a Square Duct with V-shaped Ribs,' Trans. KSME(B), pp. 1542-1551
- Ahn, S. W., Kang, H. K., Bae, S. T. and Lee, D. H., 2008, 'Heat Transfer and Friction Factor in a Square Channel with One, Two, or Four Inclined Ribbed Walls,' ASME J. of Turbomachinery, January, in press https://doi.org/10.1115/1.2775488
- Smithberg, E. and Landis, F., 1964, 'Friction and Forced Convection Heat Transfer Characteristics in Tubes with Twisted Tape Swirl Generators,' ASME J. of Heat Transfer, February, pp. 39-49
- Lopina, R. F. and Bergles, A. E., 1967, 'Heat Transfer and Pressure Drop in Tape Generated Swirl Flow,' MIT, Department of Mechanical Engineering Report, No. DSR 70281-47
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties on Single Sample Experiments,' Mechanical Engineering, Vol. 57, pp. 3-8
- Zhang, Y. M., Han, J. C. and Lee, C. P., 1997, 'Enhanced Heat Transfer and Friction Characteristics of Turbulent Flow in Circular Tubes with Twisted Tape Inserts and Axial Interrupted Ribs,' J. of Enhanced Heat Transfer, Vol. 4, pp. 297-308 https://doi.org/10.1615/JEnhHeatTransf.v4.i4.50
- Zhang, Y. M., Azad, G. M., Han, J. C. and Lee, C. P., 2000, 'Turbulent Heat Transfer Enhancement and Surface Heating Effect in Square Channels with Wavy, and Twisted Tape Inserts with Interrupted Ribs,' J. of Enhanced Heat Transfer, Vol. 7, pp. 35-49 https://doi.org/10.1615/JEnhHeatTransf.v7.i1.40