• The Bulletin of The Korean Astronomical Society
• /
• v.18
• /
• pp.18.2-19
• /
• 1993

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.131-136
• /
• 2015

In this paper, prior to the flight model X-band dual-mode circular cavity filter required for the high power transmission of the observation payload in the geostationary satellite, the development model are designed and analyzed to show the analytical multipactor requirement margin. First of all, the multipaction breakdown power sensitivities were analyzed by changing the iris width and thickness within the filter, and through that the iris width and thickness was selected and then the multipaction threshold powers over the frequencies within the bandwidth were analyzed and the required margin of 8 dB was obtained. Also for the high power transmission filter, another important phenomena known as corona breakdown are analyzed for the iris width and thickness changes. Finally the development model manufactured was tested and the results met the key requirements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.684-692
• /
• 2016

In this paper, a non-offset longitudinal shunt slot excited by an asymmetry compound iris on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the iris dimension, a resonance of the slot at a desired frequency can be achieved. The proposed resonant slot has some advantageous properties, such as a wide range of normalized resonant conductance, and minimum change of phase in the waveguide at the resonance. In addition, when the slots are arrayed for a waveguide slot antenna, the unwanted cross-polarization level can be reduced because each slot is placed in a straight line. A $8{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -18.13 dB and a cross-polarization level of -48.85 dB at 9.41 GHz, which was improved by about 15 dB of that of the conventional longitudinal slot array antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.912-918
• /
• 2011

In this paper, a composite right-/left-handed(CRLH) rectangular waveguide satisfying a balanced condition above the cut-off frequency is presented. The proposed structure consists of one shorted stub and two twisted H-plane irises which produce an effectively negative permeability and permittivity, respectively. The CRLH structure can independently control the series and shunt resonance frequencies of a CRLH transmission line which determine the left-handed(LH) and right-handed(RH) bands due to a minimized coupling between a shorted stub and twisted H-plane irises. Thus, the design of the CRLH waveguide satisfying a balanced condition is possible. To analyze the CRLH structure, a crossly connected equivalent circuit is derived. The simulated and measured results confirm that the proposed CRLH waveguide has a transmission property without a band gap among the LH and RH bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.904-911
• /
• 2011

This paper deals with transmission characteristics of a new dual resonant structure for designing waveguide band-pass filter. The structure which has a pass-band between two adjacent stop-bands in a single body consists of circular ridged aperture and four armed conducting patch. The dual resonant behavior of the structure can be represented by a combination of LC series and parallel resonant circuits. Also these resonant properties can be easily controlled by varying the geometry of the aperture and four armed conducting patch. Actually, the structure is fabricated on the microstrip substrate by use of etching technique so that it is formed an iris type resonator which can be easily put into the transverse plane of the waveguide. We use WR-90 standard waveguide, adapters, and VNA(vector network analyzer) to measure the resonant characteristics of the structure. It is very useful to design and to improve the cutoff skirts characteristics in the waveguide band-pass filter design area.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.28-38
• /
• 2001

Traffic information can be broadly categorized into point information and spatial information. Point information can be obtained by chocking only the presence of vehicles at prespecified points(small area), whereas spatial information can be obtained by monitoring large area of traffic scene. To obtain spatial information by image processing, we need to track vehicles in the whole area of traffic scene. Image detector system based on global tracking consists of video input, vehicle detection, vehicle tracking, and traffic information measurement. For video input, conventional approaches used auto iris which is very poor in adaptation for sudden brightness change. Conventional methods for background generation do not yield good results in intersections with heave traffic and most of the early studies measure only point information. In this paper, we propose user-controlled iris method to remedy the deficiency of auto iris and design flame difference-based background generation method which performs far better in complicated intersections. We also propose measurement method for spatial traffic information such as interval volume/lime/velocity, queue length, and turning/forward traffic flow. We obtain measurement accuracy of 95%∼100% when applying above mentioned new methods.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.985-989
• /
• 2010

This experiment was conducted to clarify the effects of 1-methylcyclopropene (1-MCP) on vase life of cut 'Blue Magic' iris. Pretreatment for 4 h with concentrations of 500 nL and 1000 nL 1-MCP, an inhibitor of ethylene action, inhibited the wilting and inrolling response of cut iris. The vase life of iris flowers of 500 nL or 1000 nL 1-MCP treatment was prolonged to 0.5 day compared to those held in distilled water (control). Vase life of iris showed no significant difference between $3{\mu}L{\cdot}L^{-1}$ ethylene exposure after 1-MCP treatment and control. 1-MCP treatment inhibited inrolling and increased fresh weight, water uptake, and water balance. The increase of fresh weight was high in 500 nL 1-MCP treatment and water uptake was increased by 1000 nL 1-MCP. Especially, iris flower without 1-MCP treatment dramatically decreased the water uptake as compared to the control for four or five days. Water balance of iris flowers held in water was changed to minus value faster than those with pretreatment of 1-MCP.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.2
• /
• pp.87-92
• /
• 2010

This research was aimed to extend the vase life, improve the cut flower quality and promote flowering rate of bulbous cut Iris 'Blue Magic'. Three different concentrations of 1-MCP ranging from 250 to $750nL{\cdot}L^{-1}$ were treated on cut Iris flowers for the vase life elongation. Several effects of 1-MCP treatment has shown such as early flowering as one day but vase life showed no significant differences comparing to the untreated control. Flowering rate was 75% or more in the treated ones as compare to 64.2% in untreated control. Especially, in a treatment with $250nL{\cdot}L^{-1}$ 1-MCP for 12 hours it showed all flowering. In many post-harvest experiments of cut flowers, ethylene production from flower organ has considered as most critical factor on vase life. Ethylene production from flower organ was measured by gas chromatography (GC) and it showed that there is no direct relation between flower longevity and emission of the ethylene gas in cut Iris. In comparison with the untreated control, ethylene generation rather seems to be increased as 1-MCP treatment increased. There was a synergy effect when 1-MCP and BA applied simultaneously in which flowering and vase life were fastened and also extended, respectively. Therefore, treatment of 1-MCP for cut Iris at flower early harvest is able to improve the flower quality both by diminishing non-flowering rate and by extended flower longevity.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.67-87
• /
• 2023

This study analyzed the fashion design features of Iris van Herpen and createdsixdigital fashion designsusing the SCAMPER technique with 3D clothing design software, incorporating a futuristic theme. The research methodology involvedcase analysis and a literature survey. First, the study summarizedthe design style and characteristics of Iris van Herpen. Second, a design concept wasestablished, and a design mood board wascreated. Third, the resulting design features were combined with the SCAMPER technique to incorporate Iris van Herpen's design elements intonew digital fashion designs. Fourth, after discussion with the professor and expert group, six designs were selected for production. They includededgy suit coats, overcoats, asymmetrical hoodies and asymmetrical skirts, irregularly shaped tops, dresses, leggings, jackets,and fishtail skirts. This study provides a reference for the future development of digital fashion designs and showcases the integration of science and technology in fashion design.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.790-795
• /
• 2010

This experiment was conducted to clarify the effects of cycloheximide and holding solution on vase life of cut 'Blue Magic' iris. The vase life of iris flowers held in 3% sucrose (S) + $100mg{\cdot}L^{-1}$ hydroxy quinoline sulfate (HQS) + $50mg{\cdot}L^{-1}$ $AgNO_3$ + $100mg{\cdot}L^{-1}$ Benzylaminopurine (BA), 3% S + $100mg{\cdot}L^{-1}$ HQS + $10{\mu}M$ cycloheximide (CHI), or 3% S + $100mg{\cdot}L^{-1}$ HQS + $50{\mu}M$ CHI were much longer than those held in distilled water. Squeeze stem phenomenon that showed at a holding solution containing $200mg{\cdot}L^{-1}$ HQS disappeared at a holding solution containing $100mg{\cdot}L^{-1}$ HQS. The holding solution containing 3% S + $100mg{\cdot}L^{-1}$ HQS + $50mg{\cdot}L^{-1}$ $AgNO_3$ + $100mg{\cdot}L^{-1}$ BA extended the most effective treatments on vase life, fresh weight, water balance, and flowering of cut iris flowers. However, the holding solution containing 3% S + $100mg{\cdot}L^{-1}$ HQS + $10{\mu}M$ CHI and 3% S + $100mg{\cdot}L^{-1}$ HQS + $50{\mu}M$ CHI was not effective in solution uptake or transpiration, but did result in high water balance. Iris flowers treated with CHI at the half-open flower stage showed increases in ornamental value, such as full flower opening and extended vase life. To improve flower quality and prolonging vase life of cut iris flowers, a holding solution containing $50{\mu}M$ CHI can be used continuously from the half-open stage.