• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.467-472
• /
• 2009

Seedling growth test is used to assess toxicity of nanoparticles (NPs). This study evaluates toxicity of zinc, zinc oxide NPs on Cucumis sativus using two methods; phytagel and filter paper. From the comparison, phytagel method prevents precipitation of water insoluble NPS. Seeding length was negatively related to the exposed concentration of Zn, ZnO NPs in filter method. The median effective concentrations (EC50) for C. sativus exposed to Zn, ZnO NPs were estimated about 598, 600 mg/L in filter method. Bioaccumulation increased with the exposed concentration of Zn, ZnO NPs in only filter method. The results showed that the filter paper method was much better protocol than phytagel method.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.418-425
• /
• 2017

ZnO nanoparticles (ZnO NPs) are mainly used in semiconductors, solar cells, biosensors, and cosmetics (sunscreen). In this study, we investigated the behavior of ZnO NPs in aquatic and soil environments and their effects on plants (Artemisia annua L.) in hydroponic cultivation. It was confirmed that the ZnO NPs size increased and their dissolution decreased with increasing in pH. Leaching distance of ZnO NPs was less than 2.5 cm, indicating that ZnO NPs had a little potential to leach into deeper soil layers. When ZnO NPs were exposed to plant, the total weights of plants decreased. The effects on the length of root and shoot were not observed. In addition large amount of ZnO NPs were adsorbed on the surface of plant root and didn't translocate into shoot. These results suggest that ZnO NPs block the pores of the root cell wall and decrease the bioavailability of plant nutrients. Therefore it can be speculated that the particles increase in size and settle down in the water environment and may adversely affect the plant growth by firmly adhering to the root surface when the ZnO NPs are exposed to the environment.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.138-143
• /
• 2013

Recently, ZnO nanoparticles have been studied in various application fields due to their physico-chemical properties. In this study, we have researched on the ZnO photocatalytic activity by redox reaction. ZnO nanoparticles have low photocatalytic activity in comparison with $TiO_2$ nanoparticles because it has the disadvantage that the formation of $Zn(OH)_2$ in water solvent. Therefore, we were synthesized ZnO nanoparticles by spray-pyrolysis method, and then studied on stability in water solvent. At the results, the water treated-ZnO nanoparticles showed higher photocatalytic activity than non-treated ZnO nanoparticles because molecular $H_2O$ was increased onto the ZnO surface under the water treatment. Also, we confirmed that the ZnO nanoparticles synthesized by spray-pyrolysis method is very stable in the water solvent.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1129-1134
• /
• 2009

Increasing application of nanotechnology highlights the need to clarify nanotoxity and nanoparticles characterization. However, few researches have focused on phytotoxicity of nanoparticles. This study was to examine phytotoxicity on Cumumis sativus seedling and the dissolution of Zn, ZnO nanoparticles in hydroponic culture system. Results of this study; characteristics of Zn, ZnO nanoparticles are more aggregated in nutrient solution than deionized water. C. sativus biomass significantly reduced in the nutrient solution were higher than 100 mg/L, and Zn toxicity showed $Zn^{2+}$> Zn> ZnO NPs. Results of transmission electron microscopy images, Zn and ZnO nanoparticles greatly adhered onto the root cell wall and nanoparticles were observed in the root cell.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.4
• /
• pp.117-124
• /
• 2024

Zinc oxide nanoparticles were synthesized using the polyol method with ethylene glycol containing hydroxyl groups (-OH). It was confirmed that the zinc compounds prepared by the polyol method were a mixture of zinc carbonate hydroxide (Zn₅(OH)₆(CO₃)₂) and zinc oxide (ZnO) crystalline structures. Calcination at 400℃, 600℃ and 800℃ was performed to examine the effects of calcination temperature on the particle size, morphology and crystallinity of zinc oxide. ZnO powders of calcination at 800 ℃ was evaluated to particle size analysis from ethylene glycol containing precursor solution compared with distilled water based solution. The zinc oxide particles obtained from the former had a particle size of approximately 404 ± 51 nm, whereas those from the latter exhibited a more uniform nanoparticles morphology with a particle size of approximately 109 ± 29 nm. This demonstrates that the addition of ethylene glycol can control the influence of water molecules, enabling the direct synthesis of zinc oxide in the form of uniform nanoparticles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.243-244
• /
• 2012

산화아연 나노구조를 금을 금속촉매로 사용하여 실리콘 기판위에 기상이동법으로 성장하였다. 성장할 때 소스(source)와 기판 사이의 거리는 5에서 50 mm로 변화를 주며 아르곤과 산소 분위기에서 $900^{\circ}C$로 성장하였다. 산화아연 나노구조의 구조적 및 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), 그리고 photoluminescence (PL)를 이용하였다. 산화아연 나노구조는 나노선과 나노입자의 형태로 성장하였다. 산화아연 나노구조의 광학적 특성은 소스와 기판사이의 거리가 가까울수록 향상되었다. 특히, 소스와 기판사이의 거리가 5 mm 일 때, 산화아연 나노선이 관찰되었으며 XRD 와 PL 분석에서 나타난 반가폭 (full width at half maximum)은 $0.061^{\circ}$ 와 96 meV로써 가장 작았다. 산화아연 나노선은 산화아연 나노입자와 비교하여, 결정성 및 광학적 특성이 우수하였다.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.205-211
• /
• 2012

We investigated the optical and hydrophobic properties of the deposited silver (Ag) zinc oxide (ZnO) nanorods (NRs) on flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates (i.e., ITO/PET). The ZnO NRs were grown by an electrochemical deposition using a sputtered ZnO seed layer and the Ag was deposited by using a thermal evaporator. For comparison, the same fabrication process was carried out on the bare ITO/PET without ZnO NRAs. Due to the discrete surface of ZnO NRs, the deposited Ag was formed as nano-scale particles, while the Ag became film-like for bare ITO/PET. In order to control the size and amount of Ag particles, the Ag deposition time was changed from 100 to 600 s. When the deposition time was increased, the Ag particles became larger and denser, and the absorptance was increased. This enhanced absorptance may be due to the localized surface plasmon resonance of Ag particles. Furthermore, the relatively high hydrophobicity was observed for the deposited Ag on the ZnO NRs/ITO/PET. These improved optical and surface properties are expected to be useful for flexible photovoltaic and optoelectronic devices.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.71-75
• /
• 2007

Ultrasonic irradiation in a solution during the chemical reaction may accelerate the rate of the reaction and the crystallization at low temperature. We have synthesized nanometer sized zinc ferrite particles using chemical co-precipitation technique through a sonochemical method with surfactant such as oleic acid. The thermal behaviour of the zinc ferrite was determined by the thermoanalytical techniques (TGA-DSC). Powder X-ray diffraction measurements show that the samples have the spinel structure. Magnetic properties measurement were performed using a superconducting quantum interference device (SQUID) magnetometer.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.440-446
• /
• 2006

ZnO nanoparticles were prepared by laser ablation of the ZnO powder dispersed in deionized water and surfactant solutions, and characterized using UV-VIS absorption spectroscopy, X-ray diffractometer and Transmission electron microscopy(TEM). ZnO nanoparticles produced show the pure ZnO crystal state without mixed state with Zn(OH)2 or Zn, and have the band gap energy of 3.35 eV, which is comparable to that of bulk ZnO. While ZnO nanoparticles prepared in SDS solution have the average diameter of 28nm with near spherical shape, those prepared in CTAB solution have the average size of 40 nm with mainly rod-like shape. ZnO colloidal solution of CTAB is more stable than that of SDS. These difference according to surfactants can be explained by difference of electrostatic interaction between surface charge of ZnO and surfactant molecules and by solvation effect in solution.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.206-211
• /
• 2010

Zinc oxide(ZnO) nanoparticles were synthesized by reacting an aqueous-alcoholic zinc nitrate solution to sodium hydroxide under ultrasonic irradiation at room temperature. The fullerene($C_{60}$) and ZnO nanoparticles were heated individually in an electric furnace for two hours at $700^{\circ}C$. The morphology and optical properties of the $C_{60}$ and ZnO nanoparticles were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and ultraviolet/visible (UV-vis) spectroscopy. The photocatalytic activity of the heated and unheated the $C_{60}$ and ZnO nanoparticles for the decomposition of methylene blue(MB), methyl orange(MO) and rhodamine B(RhB) was examined using UV-vis spectroscopy.