• 제목/요약/키워드: 아부

검색결과 78건 처리시간 0.022초

ST714-SCCmec type IV CA-MRSA에 의한 피부 연부조직 감염증으로 내원한 소아 증례 (ST714-SCCmec type IV CA-MRSA isolated from a Child with Recurrent Skin and Soft Tissue Infections in South Korea: A Case Report)

  • 유리나;김서희;이진아
    • Pediatric Infection and Vaccine
    • /
    • 제23권1호
    • /
    • pp.62-66
    • /
    • 2016
  • 최근 전세계적으로 지역사회 기원 메티실린내성 황색포도알균(CA-MRSA)에 의한 피부연부조직 감염증이 증가하고 있다. 16개월의 한국 여아가 생후 6개월부터 시작된 반복되는 피부연부조직 감염증을 주소로 내원하였다. 환아의 가족들도 환아와 비슷한 시기에 피부연부조직 감염증의 병력이 있었다. 환아의 혈중 면역글로불린 및 NBT 검사는 정상이었고, 피부 병변 외에는 가족 모두 건강하였다. 환아의 감염증 부위의 고름 배양 및 비강 내 보균 검사시 모두 PVL genes을 생성하는 CA-MRSA ST714 SCCmec type IV가 확인되었고, 이는 ST30의 single locus variant로서 국내에서는 보고된 적이 없는 MRSA의 유전형이다. 환아와 함께, 환아의 균주와 동일 항생제 감수성 양상을 보이는 MRSA 보균자인 환아부에게 재발 방지를 위해서 비강내 mupirocin 5일 요법을 시행하였고 이후 10개월간 추가적인 재발은 없었다.

유한요소기법에 의한 인두의 생체역학모델에 관한 연구 (A study on the biomechanical modeling of human pharynx by using FEM(Finite Element Method))

  • 김성민;김남현
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권4호
    • /
    • pp.423-429
    • /
    • 1998
  • 인두는 구강과 위장, 비강과 폐의 중간에서 능동적으로 구강을 통해 섭취되는 음식물과 비강을 통해 흡입되는 공기의 통로역할을 하는 주요한 기관이다. 본 연구는 유한요소기법을 이용한 인두의 3차원 구조의 재구성 과정을 거쳐 인두의 생체역학모델을 구현하여 각단면에서의 단면적을 유한요소모델의 시뮬레이션 결과에 의한 변위를 이용하여 산출하여 최적화 과정을 거쳐 인두의 기능시 내부에 생성되는 압력의 연속적인 압력분포를 추정할 수 있었다. 즉 인두내의압력에 대한 형상의 변형을 관찰하여 각 단면에서의 단면적을 산출하고 이를 실제의 CT영상자료와 비교하여 최적화 고장을 거쳐 각 부분에서의 추정 압력구배를 구하였다. 모델 시뮬레이션 결과 추정된 압력구배는 10-55 mmHg범위에 분포되어 있으며 전체 인두부 가운데 상부의 4레벨의 압력분포는 아부의 그것과 다른 형태를 보이는 것으로 나타났다. 이러한 인두의 생체역학모델은 인두기능장애를 가진 환자군에 적용하여 비교 분석할 경우 임상자료로서 유용할 것으로 사료된다.

  • PDF

벡터화 기술을 이용한 대규모 MIMO 시스템의 간단한 Toeplitz 채널 행렬 분해 (A Simple Toeplitz Channel Matrix Decomposition with Vectorization Technique for Large scaled MIMO System)

  • 박주용;모하마드 아부 하니프;김정수;송상섭;이문호
    • 전자공학회논문지
    • /
    • 제51권9호
    • /
    • pp.21-29
    • /
    • 2014
  • 오늘날 수많은 사용자와 제한된 메모리 공간 때문에 빅 데이터(big data)를 위한 메모리 공간 문제가 중요한 이슈로 부상하고 있다. 대규모 MIMO 시스템에서 Toeplitz 채널은 전력효율 문제뿐아니라 성능 개선에 커다란 역할을 할 수 있다. 본 논문에서는 행렬 벡터화(vectorization)에 기반한 Toeplitz 채널 분해를 제안하고, 이때 대규모 MIMO 시스템을 위한 채널에 Toeplitz 행렬을 사용하며, 또 Toeplitz Jackrt행렬이 푸리에 고속 변환(FFT)처럼 Cooley-Tukey sparse 행렬로 분해됨을 보인다.

생균제 첨가가 산란계의 산란성적과 계사내 유해가스 발생에 미치는 영향 (Effect of Probiotics Treated Diets on the Egg Performance and Noxious Gas Emission of Laying Hens)

  • 김종덕;셔원 아부엘;장재익;정흥우;김동겸;서경덕;라정찬;박형근
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2006년도 춘계학술발표논문집
    • /
    • pp.572-576
    • /
    • 2006
  • 본 시험은 산란계에 생균제를 급여하였을 때 산란계의 산란능력과 계분내 유해가스 감소에 미치는 영향을 규명하기 위하여 실시하였다. 산란계용 사료에 생균제를 0.2%와 0.5%를 처리한 구와 무처리의 3개 처리구를 두고 처리당 6반복, 반복당 4수씩 총 72수의 갈색 산란계(36주령)를 공시하여 6주간(42일) 사양 시험을 실시하였다. 산란계 사료에 생균제의 참가량을 증가함에 따라 산란율은 증가하였으며, 사료 섭취량은 감소하였다. 한편 계란의 품질에서는 생균제의 첨가량을 증가함에 따라 난중, 농후난백고, HU 및 난항색도가 증가하였다. 산란계의 영양소 이용율에서는 가용무질소물을 제외하고 건물, 조단백질, 조지방 및 조섬유 이용율이 생균제를 첨가함에 따라 증가하였다. 계분내 유해가스 발생량에서는 암모니아, 황하수소 및 멜캅탄 가스의 감소에 효과가 있었으며, 특히 황화수소의 감소에 효과가 있었다. 이상의 시험결과를 종합해 볼 때 산란계에 첨가한 생균제는 산란율을 증가시킬 뿐만아니라 계란의 품질 향상에 효과가 있었다. 또한 영양소 이용율을 개선하고 계분내 유해가스를 감소시키는 효과가 있었다.

  • PDF

고정성 가공의치를 지지하는 임프란트의 길이에 따른 임플란트 주위 골조직에서의 응력분산에 관한 광탄성 연구 (A PHOTOELASTIC STUDY OF STRESS DISTRIBUTIONS AROUND SURROUNDING BONE TISSUES OF IMPLANTS DEPENDING UPON THE LENGTH OF IMPLANT FIXTURES SUPPORTING FIXED BRIDGES)

  • 배형수;조성암
    • 대한치과보철학회지
    • /
    • 제30권4호
    • /
    • pp.611-621
    • /
    • 1992
  • 저자는 두개의 브로네마트 임플란트를 지대치로 하는 가공의치를 제작할 때 임플란트의 길이에 따른 임플란트 주위 조직의 응력분산양상을 평가하기 위하여 임플란트의 길이가 각각 10mm, 7mm, 5mm인 여섯가지의 실험모형을 제작하고 가공의치 중아부에 64kg의 수직하중을 가하여 2차원적 광탄성응력분석 실험을 행하여 비교 분석 해본 바, 다음과 같은 결론을 얻었다. 1. 여섯가지 실험모형 중 응력분산 양상은 실험모형 I (10mm, 10mm)일 경우가 가장 좋았다. 2. 근심과 원심에 같은 길이의 임플란트를 매식하였을 경우, 응력은 대체로 임플란트 표면적의 감소에 비례하여 증가하였다. 3. 근심과 원심에 다른 길이의 임플란트를 매식하였을 경우, 짧은 쪽 임플란트의 경부에 응력이 집중되었다.

  • PDF

전신질환자에서 과도한 감염치아부 국소마취시 스트레스 감소법 : 문헌적 고찰 및 증례보고 (Stress Reduction Protocol for Proper Local Anesthesia of Advanced Infected Teeth in Medically Compromised Patients -Review of Literature & Report of Cases-)

  • 유재하;최병호;설성한;김하랑;모동엽
    • 대한치과마취과학회지
    • /
    • 제8권1호
    • /
    • pp.1-9
    • /
    • 2008
  • Common dental procedures (local anesthesia and dental treatment) are potentially stress-inducing in many patients, especially medically compromised patients. The body response to dental stress involves the cardiovascular system (an increase in cardiovascular workload), the respiratory organ and the endocrine system (change in metabolism). To minimize the stress to the medical risk patient, the stress reduction protocol was established. The obtained contents were as follows: (1) Recognize the patient's degree of medical risk (2) Complete medical consultation before dental therapy (3) Schedule the patient's appointment in the morning (4) Monitor and record preoperative, perioperative and postoperative vital signs (5) Use psychosedation during therapy (6) Use adequate pain control during therapy (7) Short length of appointment: do not exceed the patient's limits of tolerance (8) Follow up with postoperative pain/anxiety control (9) Telephone the higher medical risk patient later on the same day that treatment was given. This protocol is predicated on the belief that the prevention of or reduction of stress ought to begin before the start of an appointment, continue throughout treatment, and, if indicated, into the postoperative period. The authors used the stress reduction protocol in the care of local anesthesia infected teeth in medically compromised patients. The final prognosis was comfortable without any complications.

  • PDF

능동제어기법을 이용한 자동차의 급가속 흡기소음 저감을 위한 Moving Bandpass Filter의 개발 (The Developement of Moving Bandpass Filter for Improving Noise Reduction of Automative Intake in Rapid Acceleration Using ANC)

  • 전기원;오재응;이충휘;아미누딘 아부;이정윤
    • 한국자동차공학회논문집
    • /
    • 제13권4호
    • /
    • pp.152-159
    • /
    • 2005
  • The method of induction noise reduction can be classified by using passive control or active control method. However, the passive control method has a demerit to reduce the effect of noise reduction to low frequency (below) 500Hz) range and to be limited in a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used in LMS (Least-Mean-Square) algorithm because it can obtain the complex transfer function easily in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm could not match if the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve the problem in this study, the Moving Bandpass Filter(MBPF) was proposed and implemented. The ANC using MBPF for the reduction of the induction noise shows that more noise reduction as 4dB than without MBPF.

급가속시 자동차 흡기계의 능동소음제어 성능향상을 위한 Correlation FXLMS 알고리듬 개발 (Development of Correlation FXLMS Algorithm for the Performance Improvement in the Active Noise Control of Automotive Intake System under Rapid Acceleration)

  • 이경태;심현진;아미누딘빈아부;이정윤;오재응
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.551-554
    • /
    • 2005
  • The method of the reduction of the automotive induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, When the Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. Thus Normalized FXLMS algorithm was developed to improve the control performance under the rapid acceleration. The advantage of Normalized FXLMS algorithm is that the step size is no longer constant. Instead, it varies with time. But there is one additional practical difficulty that can arise when a nonstationary input is used. If the input is zero for consecutive samples, then the step size becomes unbounded. So, in order to solve this problem. the Correlation FXLMS algorithm was developed. The Correlation FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Correlation FXLMS Is presented in comparison with that of the other FXLMS algorithms based on computer simulations.

  • PDF

한국형 수소충전소의 UAE 구축을 위한 인허가 절차 검토 및 적용 방안 모색 (Review and Analyses of International Standards and Implications for Implementing Korean Hydrogen Charging Station in UAE)

  • 변영지;김승환;진광성;서영욱;백영순
    • 한국수소및신에너지학회논문집
    • /
    • 제34권6호
    • /
    • pp.623-630
    • /
    • 2023
  • Recently, a hydrogen charging station-related memorandum of understanding (MOU) was signed between Korea Transport Institute and United Arab Emirates (UAE) Ministry of Transport in Abu Dhabi, creating a foundation for exporting green hydrogen charging stations and hydrogen powered public transit buses developed with Korean technology to Abu Dhabi. Reliable construction and operation of the charging stations require a thorough review on associated standards and legal requirements. In particular, it is essential to analyze currently effective standards related to hydrogen production, hydrogen vehicle charging, and hydrogen charging stations. This paper specifically focuses on comparative analysis of hydrogen-related standards in the UAE and the Republic of Korea. Similar to UAE, Korean hydrogen charging station-related standards follow International Organization for Standardization (ISO) standards. From real-life experiences in developing and operating charging stations, even more essence of ISO standards have been adopted in Korean standards than UAE. In particular, ISO standards related to fire prevention are additionally included in Korea. This paper also suggests procedural and administrative strategies for enabling application of Korean hydrogen charging station-related standards in UAE.

소아정신과 환아 부모의 부부관계에 대한 연구 (A STUDY ON THE PARENTAL MARITAL RELATIONSHIP OF CHILD PSYCHIATRIC PATIENTS)

  • 임계원;홍강의;이근후
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • 제2권1호
    • /
    • pp.160-175
    • /
    • 1991
  • 본 연구의 목적은 가족의 기본이 되는 부부관계에 초점을 맞추어 부부관계와 부모자녀 관계 사이의 연관성을 알아보고자 1987년 7월부터 9월사이에 소아 정신과에서 치료받은 환아의 부모들과 일반 아동이 부모들을 대상으로 결혼 만족도 검사(Marital Satisfaction Inventory ; MSI)와 부부 적응도 척도(Dvadic Adjustment Scale ; DAS)의 두가지 설문지를 이용하였다. 환아 부모군은 환아의 진단면에 따라 정신증, 신경증, 틱, 자폐증, 정신지연의 5군으로 분류하였고 각군의 결과가 평가되었다. 1) 환아부모군은 대조군보다 결혼만족도가 낮다. 2) 환아부모군은 대조군보다 부부 적응도가 유의하게 낮다(P<0.01). 3) 환아부모군, 대조군에서 여자가 남자보다 역할개념이 더 진보적이며 환아부모군에서 역할부담이 여자에게 편중됨으로써, 양육갈등(conflict in child rearing)은 모성 우월현상과 연관됨을 시사한다. 4) 원래 가족의 고통스러운 가족력(Family History of Distress)는 결혼의 정서적 의사소통, 성생활, 자녀양육과 연관이 깊다. 5) 결혼 만족도 검사(Marital Satisfaction Inventory ; MSI)의 전반적 고통 척도(Global Distress Scale ; GDS)에 의하면 정신증, 신경증, 자폐증, 정신지체, 틱의 순서로 불만족도를 보였다. 6) 부부 적응도 척도(Dvadic Adjustment Scale ; DAS)에 의하면 정신증, 신경증, 틱, 자폐증, 정신지체의 순서로 부적응도를 보였다. 7) 틱군은 자녀양육 갈등 및 양육태도에 문제점을 시사하였고 부부관계 자체는 유의한 장애를 보이지 않았다. 위의 결과로서 부부의 부적응 및 불만족은 자녀양육 및 자녀문제와 밀접한 연관성이 있음을 시사하며 소아의 정신증과 신경증군의 발병요인은 결혼 불만족과 부적응과 관련이 깊으며 자폐증이나 정신지연군의 발병요인은 결혼 불만족과 부적응과 관련이 깊지 않음을 시사한다.

  • PDF