• Composites Research
• /
• v.13 no.1
• /
• pp.78-88
• /
• 2000

Tribological properties of fiber composite materials were measured and wear resistant hybrid structure was proposed based upon the understanding of tribological behavior of the composite materials. Unidirectional composites with glass fibers, carbon fibers, and aramid fibers were tested for tribological properties in order to propose a wear resistant hybrid structure. Hybrid composites which contain carbon and aramid fibers were prepared, the specimens were sliced by a water-jet cutter, and friction and wear properties were measured. An experimental set-up was designed and built for the friction and wear test of the composite specimens. Unidirectional fiber composite and hybrid composite specimens were tested to evaluated the tribological behavior for biomimetic applications. It is observed that the friction and wear behavior of fiber composites depends upon fiber orientation, sliding speed, and type of reinforcing fibers.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.21-21
• /
• 2012

수송용 산업의 하나인 국내 조선업계는 2008년 말 이후 세계 조선경기 불황 속에서도 2009년 451억달러, 2010년 491억달러의 사상최대 수출액을 달성한 바가 있고 세계 조선사 순위에서는 1위에서 5위까지 한국 조선소 등이 우위를 차지하고 있다. 그러나 개별 기업 경쟁력은 우위에 서있지만 중국과의 격차가 많이 좁혀지고 있어 안심할 수 없는 상황이다. 특히 최근에는 탄소배출량이 적은 친환경 선박의 제조가 선박업계 전반의 화두로 대두되고 있다. 이를 위해 다양한 시도가 시도되고 있는데 그중에 하나가 선박의 경량화이다. 금속외장 전선은 선박 무게의 10~13%를 차지하고 있고 전체 사용 전선의 30~40%를 차지하고 있어 선박에서의 금속외장 전선의 무게를 줄이기 위한 연구가 필요한 실정이다. 또한 조선산업 뿐만 아니라 자동차 분야에서도 금속 외장전선이 많이 사용되고 있으며, 자동차의 연비 향상을 위한 경량화 연구가 더욱 절실한 상황이다. 본 연구에서는 수송용으로 사용되는 전선의 금속외장을 경량 고강도 섬유를 활용한 하이브리드 wire로 대체하기 위한 편조 기술 및 편조 장치를 개발하기 위한 설계 및 기초연구를 수행하였다. 초경량 고강도 섬유 Armor의 제조기술 및 최적 공정 개발을 위한 연구로서 경쟁사 샘플에 대한 분석을 실시하였고, 사용된 섬유의 성분 분석 및 물성시험을 수행하였다. 또한 원형직기 개발을 위한 구조부 설계를 위해 ANSYS해석을 수행하고 저신율 고강도인 아라미드의 이징모션 시스템 개발을 위한 연구를 수행하였으며 개구 형성방법을 설계하였다. 그리고 초경량 고강도 hybrid 케이블 아라미드 편조 표면 및 내부 가교에 의한 가공 기술을 연구하였다. 아라미드 섬유의 발수성 향상을 위한 코팅재료 선정을 위한 연구를 수행하였고, 자외선 경화공정에서 조건별 데이터를 정립하여 솔루션을 제공하고자 한다.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.109-115
• /
• 2009

The thermal stability and mechanical properties of Nephila clavata and Bassaniana decorata spider silks were measured and compared with those of aramid and polyester fibers. The thermal stability of the spider silk was lower than those of the commercial aramid and polyester fibers. However, the mechanical properties of the spider silk were far superior to that of the polyester fiber. The effect of the water content of the spider silk on its thermal stability and mechanical property was examined by conducting the silk to heat treatment at $100^{\circ}C$ under vacuum for various times. The results indicated that spider silk subjected to heat treatment for 1.5 hr had excellent thermal stability and mechanical property.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.437-443
• /
• 2013

This paper investigates the physical properties of aramid and aramid/nylon hybrid air jet textured filaments for protective garments relative to ATY nozzle diameters. Three types of para-aramids(840d, 1,000d, 1,500d) and nylon(420d) filaments were prepared; in addition, 840d aramid/420d nylon and three kinds of aramid filaments were texturized with a variation of air jet nozzle diameters(0.6, 0.75, 1 and 1.2 mm) on the AIKI air jet texturing machine. The measured physical properties of 16 specimens are as follows. The linear densities of aramid and aramid/nylon hybrid ATY increased with a larger nozzle diameter. The tenacity and initial modulus of aramid and hybrid ATY linearly decreased with a larger nozzle diameter; in addition, the breaking strain increased with the nozzle diameter. The dry and wet thermal shrinkage of hybrid ATY increased with a larger nozzle diameter from 0.6 mm to 1 mm and then decreased at a nozzle diameter of 1.2 mm (which seems to be a critical diameter). The wet and dry thermal shrinkage of aramid/nylon hybrid ATY are influenced by the nylon part of the hybrid yarns because the wet and dry thermal shrinkages of aramid ATY are less than 0.2%. The instabilities of aramid and aramid/nylon hybrid ATY were not influenced by the air jet nozzle diameter; however, they increased with the linear density of ATY.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.79-87
• /
• 2006

This study are conducted for the purpose of developing rubber material with noise and crack resistance. Cure characteristics, physical properties, thermal resistance, fuel resistance, abrasion resistance, crack resistance and noise resistance of NBR compounds with the various amounts of oleamide and aramid chip were investigated. From the measurements of cure characteristics and Mooney viscosities, cure characteristics of uncured rubber showed that a torque was decreased as the amount of oleamide increased. Hardness, modulus and elongation of rubber specimens tended to be reduced gradually, however, tensile strength remained unchanged as the amount of the oleamide increased. As a testing results of heat resistance for 70 hours at $120^{\circ}C$ and oil resistance far 70 hours at $40^{\circ}C$, tensile strength and elongation were all reduced. From the TGA/DSC analysis, there was no such a change observed in thermal characteristics of rubber materials. As a result of testing basic physical properties, abrasion resistance, noise resistance and crack resistance, the optimum ratio of oleamide to NBR was found to be 3 phr, while that of aramid to NBR 227001 was 1 phr.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.299-307
• /
• 2009

The effects of reinforcing materials on durability and mechanical properties of V-rib belt were investigated. Cotton fiber and ZnO were used as a filler for CR, and cotton and aramid fiber were used for EPDM rubber compounds. These materials were prepared as a specimen and V-rib belt for heat resistant and mechanical test. High contents of ZnO give improved wear resistance, and higher contents of cotton fiber showed higher durability in high rotation speed but lower wear resistance for CR rubber compounds. Using the aramid and cotton fiber together in EPDM rubber compounds, thermal and wear resistance were improved simultaneously. The material containing EPDM matrix showed better durability and wear resistance than those of containing CR matrix comparing in the same cotton fiber contents.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.101-112
• /
• 2019

The grouting method is utilized to reinforce and waterproof poor grounds, enhance the bearing capacity of geo-structures damaged from differential settlement. The purpose of this research is to improve the compressive strength and degree of grout using reinforcing fibers and blast furnace slag powder. In this regard, this study has conducted uniaxial compression tests for the specimens with high ratios (higher than 50%) of blast furnace slag powder. The carbon fiber content was increased by 0, 0.5, and 1.0% to coMpare its compressive strength with that of aramid fiber. The uniaxial compressive strength increased with the increase of fiber content and the bridging activity by fiber in cement tended to increase uniaxial compressive strength. Based on the results, it was confirmed that the aramid fiber has a gel time of 14 seconds and the uniaxial compressive strength is more than 3 Mpa coMpared to carbon fiber.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.661-670
• /
• 2022

In recent years, extreme rainfall and rainy seasons caused by climate change have caused river flooding and flooding damage, and it is urgent to solve economic and environmental problems in the city center due to the increase in the number of peak homes. The gap block, called the fitting block, is designed to facilitate rainwater pitching by forming a gap between the block and the block by forming a concave part and a protrusion of the block differently without the use of an existing spacer. In this study, for the production of such a gap block, the existing cement content was reduced and aramid fibers and exploration fibers, which are industrial by-products such as Goroslag fine powder and reinforcing fibers, were applied.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.64-64
• /
• 2012

아라미드는 일반적인 유기섬유와는 다른 우수한 역학적 성질을 바탕으로 보호의류 중에서 방탄방호 및 방검보호 의류에 사용되는 고부가 소재이다. 현재까지 ATY기계에서 사의 구조와 물성에 큰 영향을 미치는 Nozzle의 구조에 대한 연구결과는 많이 발표되어왔다. 그러나 최근 들어 소방방화방 검용 보호의류에 많이 사용되는 아라미드사에 ATY 공정 중에서 Nozzle의 직경이 ATY사의 물성에 어떤 영향을 미치는가에 대한 연구는 발표된 바가 없다. 따라서 본 연구에서는 Para-aramid/Nylon hybrid사를 이용하여 ATY로 제조할 경우, 표면에 생기는 loop로 인하여 타 소재와 접착시, 접착제 담지 성능이 향상되어 접착력이 상승되는 반면 아라미드 Hybrid사의 역학물성은 ATY가 가공되기 전의 물성보다 저하되는 약점을 가지고 있다. 따라서 본 연구에서는 ATY 제조공정에서 Nozzle의 직경을 달리할 때 Aramid/Nylon Hybrid ATY사의 물성변화를 분석함으로서 방화복과 방검용 보호의류에 적합한 아라미드 ATY사를 개발하고자 한다. 본 연구에서는 ATY 제조공정 중 다른 공정조건은 동일하게 하고 Nozzle의 직경을 0.6, 0.75, 1, 1.2mm로 변경하여 4가지 시료를 준비하고 물성분석을 위하여 제조된 시료의 강신도, 초기탄성률을 각각 측정하여 인장특성을 확인하였으며, 건열수축률과 습열수축률을 측정하여 시료의 열 수축률을 측정 분석하였다. 표면의 루프 발현 정도를 보기위하여 형태 불안정성을 측정 평가하였으며 영상현미경시스템을 사용하여 표면특성을 측정 평가하여 다음과 같은 결론을 얻었다. Nozzle의 직경이 증가함에 따라 절단강도는 30% 감소하였고 초기탄성률은 3배 가까이 감소하였다. 그리고 절단신도는 2배정도 증가하는 경향을 나타내었다. 또한 Nozzle의 직경이 증가함에 따라 ATY hybrid사의 건 습열수축률이 증가하다가 직경이 1.2mm일 때 감소하는 경향을 나타내었고 직경 변화에 따라 4~6%의 열 수축률의 분포를 보였다. Para-aramid/Nylon hybrid사의 형태불안정성은 0.3~0.5%를 분포를 나타내었고 Nozzle의 직경이 0.6, 1mm일 때 상대적으로 낮은 ATY의 불안정성이 확인되었다. Nozzle의 직경이 감소할수록 loop의 엉킴이 적으며 flat하였으며 직경이 1.2mm일 때 가장 조밀하고 표면에 loop가 많이 형성된 것을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.61-69
• /
• 2011

Fiber Reinforced Plastic (FRP) sheets have been widely used to retrofit and rehabilitate RC structures, while in case of retrofitting steel structures, there are no codes and researches. It stems from configuration of member and characteristics of bonding behavior. This study focused on the static behavior of steel beams reinforcement by AFRP sheets. The main objective of the experimental programme was the evaluation of the force transfer mechanism, the increment of the beam load carrying capacity and the bending stiffness. A bending test was conducted on a H-shaped steel beam, with aramid FRP sheets bonded to its flanges. The mid-span deflection and the strain from three points along AFRP sheets were recorded Test results exhibit that the increment of the load-carrying capacity with reference to a mid-span deflection level of 15 mm(1/125mm of the clear span) was equal to 9.4% and for the two layers case, an elastic stiffness increment is slightly higher than one layer case.