• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.129-143
• /
• 2024

In magnetotelluric (MT) surveys, small inhomogeneities near the surface cause a static shift in which apparent resistivities shift regardless of frequency. As the static shift in MT data leads to errors in subsurface structure interpretation, many studies have been conducted over the past few decades to mitigate or remove the distortions it caused. The most representative method involves removing static shifts from the data before inversion. Conversely, static shifts can be corrected during inversion or included in the inversion process. In addition, other geophysical data can be used to remove static shifts. However, the correction methods are limited to one-dimensional (1D) static responses, and limitations remain in two- or three-dimensional (2D or 3D) interpretation of distorted MT data owing to static shifts. This study provides a foundation for future studies on static shift by analyzing several previously published methods.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.45-59
• /
• 2023

The transport calculation for a wide variety of radionuclides contained in high-level radioactive waste, especially spent nuclear fuel, is computationally difficult, and input data collection for this also take a considerable amount of time. Accordingly, considering limited resources, it is possible to reduce the calculation time while minimizing impact on accuracy by including only radionuclides important to calculation result through applying some criteria among potential radiation source terms that may release into environment. In this paper, therefore, we reviewed and analyzed the screening process performed to select radionuclides to be considered in the safety assessment for the KBS-3 type repository in Sweden and Finland. In both countries, it was confirmed that a list of radionuclides was selected by comprehensively considering screening criteria such as radioactivity inventory, half-life, radiotoxicity, risk quotient, and transport properties, and etc. A comparison of radionuclides included in the radiological safety assessment in both countries suggests that most of nuclides are considered in common, and a few nuclides considered only in one country are due to differences in decay chain treatment or spent fuel types. As of now, since most of information on the disposal facility in Korea has not been determined, it is necessary to comprehensively model release and transport of all radionuclides considered in Sweden and Finland when performing the radiological safety assessment. Based on these results, we derived the screening concept of selecting a list of radionuclides to be considered in the radiological safety assessment for the domestic KBS-3 type geological disposal facility, and this result is expected to be used as technical basis for confirming conformity with the safety objective. In a more detailed evaluation reflecting domestic characteristics in the future, it would be desirable to consider only radionuclides selected in accordance with the screening procedure. However, further research should be conducted to determine the quantitative limit for each criteria.

• Journal of Communication Design
• /
• v.68
• /
• pp.278-288
• /
• 2019

The purpose of this study is to analyze the effects of risk and convenience on purchase intention in the IOT market, and I want to analyze the moderating effect of emotional consumption value. In this study, two products were selected from three product groups. There are three major methods of research. First, theoretical considerations. Second, survey analysis. Reliability analysis and factor analysis were performed using descriptive statistics using SPSS. Third, we measured changes of EEG according to in - depth interview and indirect experience. As a result of the hypothesis of this study, it was confirmed that convenience of use of IoT product influences purchase intention. Risk was predicted to have a negative effect on purchase intentions, but not significant in this study. This implies that IoT products tend to be neglected in terms of monetary loss such as cost of purchase, cost of use, and disposal cost when purchasing. In-depth interviews and EEG analysis revealed that there is a desire to purchase and try out the IoT product due to the nature of the product, the novelty of new technology, and the vague idea that it will benefit my life. The aesthetic, symbolic, and pleasure factors, which are sub - elements of emotional consumption value, were found to have a great influence. This is consistent with previous research showing that emotional consumption value has a positive effect on purchase intention. In-depth interviews and EEG analyzes also yielded the same results. This study has revealed that emotional consumption value affects the intention to purchase IoT products. It seems that companies producing IoT products need to concentrate on marketing with more emotional consumption value.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.285-299
• /
• 2006

At the end of 2005, 443 nuclear reactors were operating in 32 countries worldwide. They had provided about 3,000 TWh, which was just over 16 percent of global electricity supply. With the generating capacity of 368 GWe in 2004, the spent fuel generation rate worldwide, now becomes at about 11,000 tHM/y. Projections indicate that cumulative amounts to be generated by the year 2020, the time when most of the existing NPP will be closed to the end of their licensed lifetime, may be close to 445,000 tHM. In this regard, spent fuel management is a common issue in all countries with nuclear reactors. Whatever their national policy and/or strategy is selected for the backend of the nuclear fuel cycle, the management of spent fuel will contribute an impending and imminent issues to be resolved in the foreseeable future. The 2nd Review Meeting of the Contracting Parties to the Joint Convention was held in Vienna from 15 to 24 May 2006. The meeting gave an opportunity to exchange information on the national policy and strategy of spent fuel management of the Contracting Parties, to discuss their situations, prospects and the major factors influencing the national policies in this field and to identify the most important directions that national efforts and international co-operation in this area should be taken. In this paper, an overview of national and global trends of spent fuel management is discussed. In addition, some directions are identified and recent activities of each Member States in the subject area are summarized.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.243-269
• /
• 2021

Since the early 2010s, the social importance of research and practical projects targeting deep geological disposal of high-level nuclear waste, underground CO₂ storage and characterization of deep subsurface by borehole investigation has been increasing. In this regard, there is also a significant increase in the need for in situ test technology to obtain quantitative and reliable information on the hydraulic characteristics of deep rock mass. Through years of research and development, we have independently set up Deep borehole Hydraulic Test System (DHTS) based on the key apparatuses designed and made with our own technology. Using this system, high precision constant pressure injection tests were successfully completed at the two 1 km boreholes located in Mesozoic granite and sedimentary rock regions, Gyeongju. During the field tests, it was possible to measure very low flow rate below 0.01 l/min with micro flow rate injection/control module. In this paper, the major characteristics of DHTS are introduced and also some results obtained from the high precision field tests under the deep and low permeable rock mass environment are briefly discussed.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.464-477
• /
• 2022

DFN (discrete fracture network) models that take account of spatial variability and correlation between rock fractures have been demanded for analysis of fractured rock mass behavior for wide areas with high reliability, such as that of underground nuclear waste repositories. In this regard, this report describes the spatial distribution characteristics of fracture networks, and the DFN modeling methodologies that aim to represent such characteristics. DFN modeling methods have been proposed to represent the spatial variability of rock fractures by defining fracture domains (Darcel et al., 2013) and the spatial correlation among fractures by genetic modeling techniques that imitate fracture growth processes (Davy et al., 2013, Libby et al., 2019, Lavoine et al., 2020).These methods, however, require further research for their application to field surveys and for modeling in-situ rock fracture networks.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.141-155
• /
• 2023

Monitoring technology based on electrical resistivity is widely used for non-destructive data collection and health analysis of underground structures and tunnels. Vulnerable sections such as fault zone generates many problems during construction of the tunnel. These problems cause displacement and stress changes of the ground. Therefore, it is necessary to predict the state of the fault zone section to ensure the mechanical stability of the underground structure. Monitoring the size of joints and the porosity of the fillings is essential for rocks. Previous studies have not considered the variety of fillings in rock joints. In this study, electrical resistivity tests were conducted according to the particle mixing state of the sandy fillings. When the size of fillings is decreased at the constant porosity, the electrical resistivity tends to increase. The results of this study are expected to be useful as basic electrical resistivity data for predicting the ground conditions and evaluation of the ground behavior that is containing sandy fillings in the rock joint for tunnels.

• Geophysics and Geophysical Exploration
• /
• v.27 no.3
• /
• pp.181-195
• /
• 2024

This tutorial explains that the static effect in the magnetotelluric (MT) survey is a physical phenomenon caused by charges accumulated on the boundaries of subsurface inhomogeneities. To facilitate understanding of the physical phenomenon, differences between static induction and charge accumulation on the boundary are explained and analyzed with help of schematic illustrations. Subsequently, from the electromagnetic (EM) integral equation formulation, it is clearly shown that the secondary electric field due to charges accumulated on the interface in the presence of the primary field appears as the static effect. Therefore, except in the cases of the layered earth or a two-dimensional earth with transverse magnetic (TM) mode excitation, the static effect always exists in MT responses and further, it is not 'static' but rather frequency dependent. Despite the fact that the static effect is a secondary electric field due to inhomogeneity, inevitable under-sampling in the frequency and spatial domains prevent the effect from being handled properly in numerical inversion. Therefore, considering the practical aspects of the MT survey, which cannot be a continuous measurement covering the entire survey area over a wide frequency band, a three-dimensional (3-D) inversion incorporating the static shift as a constraint with the Gaussian distribution is introduced. To enhance understanding of the integral equation EM modeling, the formulation of the 3-D integral equation and mathematical analyses of the Green tensor and scattering current are described in detail in the Appendix.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.477-495
• /
• 2022

This study examined the sustainability of CO₂-rich water by analyzing the water level and water quality change pattern with the amount of its use in Angseong area, Chungju. The origin and supply of CO₂ component were discussed in consideration of ⁸⁷Sr/⁸⁶Sr ratio, occurrence of CO₂-rich fluid inclusions in nearby W-Mo deposits and other surrounding geological characteristics. According to the data from 1986 to 2017, the depth of the water level of CO₂-rich water was significantly lowered in the late period (2009-2015) than in the early period (1986-1992) of the development of hot spa wells, and the optimal yields for pumping tests also showed a tendency to gradual decrease. Concentrations of CO₂ component also decreased continuously in the later stages compared to the early stages of development, but it has been stable since 2012. It is inferred that the geological environment related to forming W-Mo quartz vein deposits (0.5×1.5×several km) around the study area are largely involved in the origin and supply of CO₂ component, and the supply of CO₂ component is not infinitely supplied from deep current magma activity. Rather, since it is finitely supplied from a restricted subsurface region formed in the past geological period, it is necessary to efficiently control its use in order to maintain the sustainability of CO₂-rich water in the study area.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.389-401
• /
• 2023

Climate, weather, insolation (solar radiation), and solar energy in major cities of Tajikistan were investigated prior to construction of infrastructure for the Dushanbe Solar Station. In Dushanbe city there was a 70% probability of sunny days from May 16 to October 23, a period of 5.2 months. August had the most sunny days of in the year, with 99% probability of a sunny, the cloudiest month was February with a 41% chance of being sunny. In major cities of the Sughd and Gorno-Badakhshan states, the average number of cloudy days per month was ~3.3, with Dzhauz having 53 day and Fedchnko Glacier 79 days. For the 18 major cities of Tajikistan, the average annual total solar radiation was 2,429 W/m², and the average monthly solar radiation was 202 W/m². The city with the lowest annual total and monthly average solar radiation was Shartuz in Sughd state, with values ~2.7% less than the national average. The cities with the highest annual total and monthly average solar radiation were Khorog and Jirgatol in Gorno-Badakhshan state, with values ~10% above the national average. The daily average incident shortwave solar energy in the cities Dushanbe, Karakul, and Jirgatol was ~7.8 kWh per 2.4 m² during summer (May-August), and 2.7 kWh during winter (November-February), or ~35% that of summer.