• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.463-467
• /
• 1995

In vitro metabolism study of ${\alpha}$-endosulfan by liver and kidney microsomal cytochrome P-450 monooxygenase system of the mouse(Balb/C) was performed. ${\alpha}$-Endosulfan was metabolized to endosulfan lactone(EL), endosulfan hydroxyether(EHE), endosulfan alcohol(EA), endosulfan sulfate(ES), endosulfan ether(EE) and ${\beta}$-endosulfan(${\beta}$-E). The main metabolites of ${\alpha}$-endosulfan were EL(13.2%) and EA(11.5%) in liver microsome and EA(17.4%) md EHE(19.3%) in kidney microsome. The $^{14}C$-activity of organic extractable fraction and water soluble fraction were 63.4% and 31.7% in liver micosome incubates respectively. The water soluble metabolites were EA(83.9%), EHE(4.5%) and ES(2.3). Piperonyl butoxide treatment inhibited the formation of EE by 86%, EA by 92% and EHE, EL and ES were barely formed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.72-84
• /
• 2016

The conventional brace system is generally accepted as the lateral load resisting system for steel structures due to efficient story drift control and economic feasibility. But lateral stiffness of the structure decreases when buckling happens to the brace in compression, so that it results in unstable structure with unstable hysteresis behavior through strength deterioration. Buckling restrained brace(BRB) system, in which steel core is confined by mortar/concrete-filled tube, represents stable behavior in the post-yield range because the core's buckling is restrained. So, seismic performance of BRB is much better than that of conventional brace system in point of energy absorption capacity, and it is applied the most in high seismicity regions as damper element. BRBs with various shaped-sections have been developed across the globe, but the shapes experimented in Korea are now quite limited. In this study, we considered built-up type of restraining member made up of precast reinforcement concrete and the steel core. we experimented the BRB according to AISC(2005) and evaluated seismic performances and hysteresis characteristics.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.100-100
• /
• 2018

물 고추냉이는 십자화과의 숙근성 다년생 초본식물로서 일본과 대만 등에서 재배되며 세계 여러 나라에서 식품, 가공원료, 향신료, 의약소재 등으로 이용되고 있다. 우리나라에서는 철원과 무주 등에서 재배되고 있으나 재배환경 및 기술의 한계로 규모와 생산량은 매우 저조한 실정이다. 따라서 본 연구는 물 고추냉이 순환 베드시스템 개발을 위한 기초연구로 수행되었다. 마사토의 높이와 고랑의 유무에 따라 3개 베드 (A-마사토 높이 4.0cm, 고랑 있음, B-마사토 높이 5.5cm, 고랑 있음, C-마사토 높이 7.0cm, 고랑 없음)로 시험하였다. 물 고추냉이의 생장량과 식물체 내의 양분 분석(질소, 인산, 칼륨)을 분석하였다. 그 결과 베드 높이가 가장 낮고(4cm) 고랑이 있는 베드에서 생장량이 가장 우수하였고 마사토 높이가 가장 높은(7cm) 처리구보다 생장량이 2배 이상 증가하였다. 전체적으로 엽장보다 엽폭이 길었고 심장형 잎의 특성을 그대로 나타내었다. 식물체 내의 양분 분석 결과 처리구 별로 질소, 인산, 칼륨의 함량 차이가 크게 나타났다. A 베드에서 질소 4,150, 인산 500, 칼륨 1,500ppm 에 비하여 C 베드는 질소 730, 인산 120, 칼륨 700ppm 정도로 낮았다. 대조구의 동일 지역, 동일 기간의 계류지 하우스재배(데이터 미발표)에 비해 순환식 베드 재배가 우수하였고, 특히 A 베드에서 가장 우수하여 절수, 2단 재배 등의 예상되는 효과를 감안할 때 물 고추냉이 순환식 베드 재배의 가능성이 충분하다고 판단된다.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.231-236
• /
• 2017

In this study, the inhomogeneous material composed of CFRP(carbon fiber reinforced plastic) and structural metal of SM45C is used for the light material. The finite element analysis on the basis of compact tension test was carried out by using the composite material for sandwich type bonded with the unidirectional CFRP that differs in fiber stacking angle at both sides with the core of SM 45C. CT test is the representative method to confirm the fracture behaviour due to crack in material under the load. The effect on crack and hole must be investigated in order to apply inhomogeneous material to mechanical structure. As the result of this study, the fracture behaviour by CT test of the composite material for sandwich was studied by simulation analysis. The sandwich composite of unidirectional CFRP with the stacking angle of [0/60/-60/0] has the superior strength and the maximum equivalent stress of about 182GPa.Also, the esthetic sense can be shown as the designed factor of shape with composite material is grafted onto the convergence technique.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.88-97
• /
• 1998

Large aluminium extrusions can be used in rolling stocks and high speed vessels to reduce weight and labor cost. As sandwich plates with corrugated core have enough strength in transverse and longitudinal direction, welding lines to connect members are reduced and transverse members to strength longitudinal members are not required. However, for proper design of aluminium extrusion plates, understanding of structural behaviors of the exclusions are necessary. In this paper, at first, detailed finite element analysis is carried out to understand structural behavior. And then, simple theoretical formulas for design purpose are proposed using the orthotropic plate theory. Shear stresses resulting from end twisting which is characteristics of deep aluminium extrusion plates can also be calculated by the simple theoretical formula. Comparison with the results by detailed finite element analysis shows good accuracy of the proposed simple formulas. The simple formulas can be useful in repetitive analysis in the initial design stage.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.1
• /
• pp.19-23
• /
• 2003

The optimum extraction condition of pungent component from Zanthoxylum piperitum D.C pericarps by using supercritical fluid extraction(SFE) was investigated. The optimum condition of SFE was $300kg/cm^2$ of pressure, $60\;^{\circ}C$ of extraction temperature, 80% of $CO_2$ fluid, 20% of modifier(methanol) volume and 20 min of extraction time. The extraction efficiency between the classical solvent extraction method and SFE was studied. About 40% of extraction efficiency was improved when SFE was applied.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.3
• /
• pp.93-105
• /
• 2004

The Shihwa wetland, a newly developed constructed wetland prototype in Korea with an area of approximately 104 ha, was established to improve the water quality severely polluted inflow streams into Lake Shihwa. Because this wetland could play a role as an ecological park in addition to improving the water quality, an ecological impact of the Shihwa constructed wetland has been a national concern. This paper focused on reporting the survey results for fauna among the entire investigation results for 3 years. A total of 129 terrestrial insect species have been observed from August 2001 to June 2002. Among them, Ischnura asiatica (Brauer) (order Odonata), Scymnus species (order Coleoptera) and Orthopteran species were frequently found in the reed bushes. A total of 77 bird species were recorded in a seasonal count, the maximum number of species was 34 in winter and the maximum number of individuals was 4,599 in summer. For the freshwater fish, only 4 species were found in 2000, however in 2001 and 2002, 12 species and 459 individuals were collected at four survey points. Among these 12 species, the dominant species were Mugil cephalus(36%), followed by Carassius auratus (25%) and Rhinogobius brunneus (22%). Meanwhile,12 individuals of Oryzias latipes were observed nearby, mostly downstream of the wetland. For the Herpetofauna at four survey areas, 3 species of amphibians and 3 species of reptiles were recorded. Because of remaining salinity in the soil of the Shiwha constructed wetland, Herpetofauna inflow to the wetland was scanty and mainly inhabited the upstream area. A total of 8 mammal species were recorded. Small-sized species were the striped field mouse, the Ussurian harvest-mouse, the Manchurian reed vole and the brown rat. Middle- and large-sized species were Korean water-deer, Korean raccoon dogs, Korean yellow weasels and feral cats.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.33-41
• /
• 2006

Nowadays in Korea, KS F 2271(Testing method for incombustibility of internal finish material and element of buildings) has been using for the evaluation of fire safety performance of sandwich panels. The test method in Japan and in Korea was based on the same way. When the Japanese standard building code was revised in 2000, the test method in the ISO 5660-1 was adopted for the test method for combustion performance of internal finishing materials and elements of buildings. According to this, the revision version of draft substituting the test method in the KS F 2271 for one in the ISO 5660-1(Cone Calorimeter method) is informed in Korea. In this study, combustion properties of sandwich panels were tested using the cone calorimeter method. Ignition time, peak heat release rate and total heat released of four sandwich panels and four core materials (thermal insulation material), which are widely used in Korea, were tested. Test results were analyzed for each specimen. Finally, test results were classified by Japanese standard building code and Canadian NBC revised.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3802-3807
• /
• 2011

In this study, in-plane and out-plane compression tests of aluminum foam and honeycomb sandwich composites were carried out. Through these tests, the relationships of load-displacements were analyzed and the compression characteristics were compared with each other. The specimens were compressed with the speed of 1mm/min by using the universal testing machine. Experimental procedures were taken with photograph by the camera and load cell data were stored into computer. Test results showed that buckling was occurred at the aluminum foam core and honeycomb core according to the increase of load. In the in-plane compression test, the maximum load of aluminum foam specimen was similar with that of honeycomb sandwich. The property of honeycomb was better than that of the foam in consideration of specific gravity. In the out-plane compression test, compression maximum load of aluminum honeycomb sandwich composite was higher than that of aluminum foam sandwich composite.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.582-586
• /
• 1999

The processing conditions for producing and edible alginate film from sea tangle were investigated by measuring water vapor permeability (WVP), tensile properties and colors of film. The alginates were extracted with $3\%$ sodium carbonate ($Na_2CO_3$) solution for 5 hrs, and the alginate films were prepared with extracted sodium alginates, D-gluconic acid lactone, $CaCO_3$ and various plasticizers, As the concentration of alginate in making the film was increased, the WVP and elongation of the film were decreased and the tensile strength was increased. The higher amount of plasticizer showed the higher WVP and elongation, and the order of various plasticizers in increasing the WVP and elongation of the film was glycerol, polyethylene glycol, and sorbitol. The addition of sorbitol in the film showed the highest value (89.57) in lightness of Hunter color system and the film added polyethylene glycol had the highest values (-1,12 and 11.4) in redness and yellowness.