• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.258-265
• /
• 2013

This study was designed to investigate the correlation between the degree of knowledge in regards to the importance of oral health and the smile scores as well as the correlation between their actual oral conditions and smile scores. The author surveyed the knowledge and the actual oral health condition of the subjects, 150 high school students (80 males and 70 females), and their frontal pictures were taken when they had full smiles. After evaluation of the smiles of the subjects by five dentists, the results were analysed. This study showed that there was neither a correlation between the smile score and the knowledge of oral health nor the actual oral condition. The investigation showed that the actual oral condition and care was performed well even if there were some wrong answers in the questionnaire, which asked about proper oral health. In conclusion, the smile could be related to the repetition of the habit of smiling rather than being related to the knowledge of oral health or their actual oral condition.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2015

Diastema is thought to be a problem related to aesthetics, pronunciation, or malocclusion. Due to its extent and patient conditions, orthodontic treatment, prosthodontic treatment, and conservative direct resin restoration are the treatment options for diastema closure. Additional factors need to be considered when deciding on the most appropriate treatment of diastema, particularly for patients with cerebral palsy. A 13-year-old girl visited the Department of Pediatric Dentistry at Yonsei University Dental Hospital with a chief complaint of the large gap between her upper front teeth. After clinical and radiographic examinations, midline diastema of 4.5 mm, protrusive maxilla incisors, congenital missing teeth, retained primary teeth, etc. were identified. Prosthodontic treatment with intentional root canal treatment was not appropriate because of the patient's age. Dental spaces can be closed effectively via orthodontic appliances. However, additional prosthodontic and restorative intervention is unavoidable, which incurs significant costs and requires more time. Instead of orthodontic and prosthodontic treatment, direct resin restoration can address the chief complaint; these restorations are reversible, less harmful to other oral structure and teeth, relatively easy to apply, less expensive than other treatments, and require shorter office visits. Midline diastema can be treated in several ways. For diastema closure in patients with cerebral palsy, conservative resin restorations are a short, simple, and appropriate treatment compared with orthodontic or prosthodontic treatments.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.463-476
• /
• 2010

Inadequate or unstable posterior support cause extrusion of antagonistic teeth and overloading of remaining teeth. Extrusion of antagonistic teeth result in collapsed occlusal plane and decreased prosthetic space. Also, overloading of remaining teeth increase occlusal wear or anterior extrusion of anterior teeth, which is resulting in loss of anterior guidance, disharmony of occlusion and decreased prosthetic space. In this case, careful evaluation of OVD(occlusal vertical dimension) is the general first trial to regain appropriate function and esthetics. Simultaneously, adequate anterior guidance and harmonious occlusal plane should be established in the repeatable reference position of the mandible. We report this case because severely worn dentition achieved functional and esthetic results from full mouth rehabilitation with increased vertical dimension and use of centric relation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1407-1408
• /
• 2015

현재에는 과거와 달리 표면상 비춰지는 외모의 중요성이 강조되어 치아 교정을 해서 미적 욕구를 충족시키려는 사람들이 증가하고 있다. 특히나 치아를 교정할 때 사용되는 치아교정용 브라켓은 부착되는 위치가 치아 앞면이기 때문에 미관상의 중요성은 치아교정장치 중 가장 크다. 이러한 이유 때문에 미적인 부분을 고려하여 치아색과 유사한 브라켓이 개발되었는데, 이 브라켓은 레진 브라켓이다. 이는 치아 교정에 도움을 주면서 심미성이 우수한 장점이 있지만 음식을 섭취할 때 음식의 색소에 의해 브라켓의 색 변화가 일어난다는 단점이 있다. 본 연구에서는 사람들이 자주 섭취하는 음식이나 음료에 치아교정용 브라켓을 착색시켜 색이 변하는 정도의 차이를 컬러센서를 이용해 측정하였다. 이렇게 측정된 브라켓의 RGB 값은 객관적이고 정량적인 값을 나타낼 수 있다. 이는 브라켓의 변색 뿐만 아니라 치아 미백 치료에도 적용되어 사용될 수 있을 것이다.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.129-141
• /
• 1995

Composite resin and glass-ionomer cement can be used for the purpose of repair of defective amalgam restoration. The purpose of this study was to evaluate of shear bond strength of esthetic restorative materials to dental amalgam. The materials used in this study were Photo Clearfil Bright(light curing composite resin), Clearfil F II(chemical curing composite resin), Fuji II LC(light curing glass-ionomer cement), Fuji II (chemical curing glass-ionomer cement), All-Bond 2(intermediary), and Scotchbond Multi-Purpose (intermediary). A total of 120 acrylic cylinders with amalgam were divided into 8 groups After amalgam condensation, all specimens were stored for 48 hours in water at $37^{\circ}C$ and tested with Instron universal testing machine between amalgam and composite resins and glass-ionomer cements. The data were analyzes statiscally by ANOVA and Duncan test. The following results obtained ; 1. The shear bond strength of bonded composite resin to amalgam was higher than bonded glass-ionomer cement(P<.001). 2. The group 4 had highest shear bond strength with 15.45kgf/$cm^2$ and the group 5 had lowest shear bond strenght with 3.26kgf/$cm^2$(P<.001). 3. In the group 3, 4, 5, 6, the group 3, 4 with All-Bond 2 had higher shear bond strength than the group 5, 6 with Scotch bond MP both in light-curing and in chemical curing. 4. Both in composite resin and glass-ionomer cement, chemical curing materials had higher shear bond stength than light curing materials(P<.001).

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.372-383
• /
• 1995

The staining tendency of esthetic restorative material was very important factor for the people who are great concern about the esthetics. Most external stains were superficial and adjustable by routine prophylactic procedure. But some of these stains were remained under superficial stain. Some of these stains were accumulative on external tooth surface and it's removal alter the anatomic contour of restoration. The purpose of this study was to evaluate and compare the staining tendency of esthetic restorative materials to staining solution. In this study two glass-ionomer cements (Fuji II Glass-Ionomer Cement and Fuji II LC Glass-Ionomer Cement) and three composite resins (Sil$\ddot{u}$x Plus, APH and P-50) were evaluated and compared. Total 8 disc-shaped specimens of each material (17mm diameter, Imm thick) were immersed in coffee staining solution. These specimens were divided into one control and 3 experimental groups according to the immersion period as follows : Control: immersed in distilled water during each testing period Group 1 : immersed in staining solution for 6 hours Group 2 : immersed in staining solution for 24 hours Group 3 : immersed in staining solution for 72 hours Staining tendency was evaluated by total color difference(${\Delta}E^*$) of specimen before and after staining by spectorcolorimeteric readings (ColorQUEST Spectrophotometer, U.SA.). The results were as follows : 1. The total color differences of each testing materials were increased with time. 2. Among the experimental groups, the Fuji II Glass Ionomer Cement showed the highest total color difference(6.803) and the Silux Plus showed the lowest total color difference(1.637). 3. In comparison of glass ionomer cements, the total color difference of chemical cured glass ionomer cements(6.803) were higher than light cured glass ionomer cements(3.891) (P<0.01). 4. In comparison of composite resins, the P-50 showed the highest total color difference and the Silux Plus showed the lowest total color difference, but there was not significant difference among composite resins(P>0.05).

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.271-279
• /
• 1985

The authors treated a case of bimaxillary dentoalveolar protrusion corrected by anterior segmental osteotomies: As presurgical treatment & process, closing of the upper anterior spacing with fixed appliances was worked out, cephalometric predicition & model surgery was done, and fabrication of intra-arch acrylic resin splints were made. It was not necessary to make an intermaxillary fixation with wire after surgery. Only intramaxillary fixation of anterior retracted mobile segment with resin plate was required for 8 weeks. After surgical treatment, leveling of the upper and lower arch with rectangular arch wire were accomplished as the Intrusion of anterior teeth proceeded. We will continue to improve the class II molar relationship by using class II elastics and have a good occlusiion through the orthodontic treatment.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.647-655
• /
• 1998

심미도재수복시의 와동의 폭과 교두의 capping이 응력의 분포에 미치는 영향을 비교하기 위하여 연속사진 촬영술을 이용하여 상악제1소구치의 3차원 유한요소 모델을 제작하였다. 법랑질, 상아질, 도재 및 복합레진시멘트의 각각의 재질에 대한 물성치를 부여하고, 140N의 하중을 가하여 Super SAP 프로그램으로 해석하여 다음과 같은 결과를 얻었다. 1. 응력은 탄성계수값이 큰 법랑질과 도재를 따라 분포되고, 연질의 상아질에는 적게 발생된다. 2. 와동의 협측치수선각부위에서는 인레이모델의 경우에는 와동폭의 증가에 따른 응력의 증가는 관찰되지 않으나, 온레이모델에서는 응력의 증가가 관찰된다. 3. 온레이모델의 경우에는 근심협측교두를 피개하고 있는 도재부위에 최대주응력이 크게 나타나고, 치은변연부의 도재에서는 교두를 피개하지 않은 인레이모델의 해당되는 법랑질에 비해 응력이 1/2정도로 감소된다. 4. 하중이 증가되면 잔존치질의 파절은 근심와동의 협측치은선각부위에서 협측보다는 치은을 향해 경사지게 일어날 것이다. 5. 교두를 피개하면 교두피개부위에서의 도재의 파절가능성은 증가되고, 치은변연에서는 도재와 하부의 치질의 파절가능성은 감소된다. 6. 도재를 이용하여 교두를 피개할 경우에는 응력을 견딜 수 있는 도재의 두께를 부여할 수 있도록 교두를 충분히 삭제하여야 하고, 충분한 강도를 갖는 도재를 선택하여야 한다.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.393-398
• /
• 2001

Polymerization of light-activated restorations results in temperature increase caused by both the exothermic reaction process and the energy absorbed during irradiation. Within composite resin, temperature increases up to 2$0^{\circ}C$ or more during polymerization. But, insulation of hard tissue of tooth lowers this temperature increase in pulp. However, many clinicians are concerned about intrapulpal temperature injury. The purpose of this study was to evaluate temperature changes in the pulp according to various restorative materials and bases during curing procedure. Caries and restoration-free mandibular molars extracted within three months were prepared Class I cavity of 3$\times$6mm with high speed handpiece fissure bur. 1mm depth of dentin was evaluated with micrometer in mesial and distal pulp horns. Pulp chambers were filled with 37.0$\pm$0.1$^{\circ}C$ water to CEJ. Chromium-alumina thermocouple was placed in pulp horn below restorative materials for evaluating of temperature changes. This thermocouple was connected to temperature-recording device(Multiplication analyzer MX, 6.000, JAPAN). Temperature changes was evaluated from initial 37.$0^{\circ}C$ after temperature changes to 37.$0^{\circ}C$. Tip of curing unit was placed in the center of prepared cavity separated 1mm from restorative materials. Curing time was 40s. The restorative materials were used with Z 100, Fuji II LC, Compoglass flow and bases were used with Vitrebond, Dycal. Resrorative materials were placed in 2mm. The depth of bases were formed in 1mm and in this upper portion, resin of 2mm depth was placed. This procedure was performed 10 times. The results were as follows. 1. All the groups showed that the temperature in pulp increased as curing time increased 2. The temperature increase of glass ionomer was significantly higher than that of Resin and Compomer during curing procedure (P<0.05). 3. The temperature increase in glass ionomer base was significantly higher than that of Calcium hydroxide base during Resin curing procedure (P<0.05).

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.217-227
• /
• 1990

The purpose of this study was to evaluate the marginal leakage of esthetic restorative materials according to the filling method in class V cavities. 60 cavities were prepared on buccal surface for dye penetration test and divided into 5 experimental groups according to the filling methods of esthetic materials: group 1 was filled with glass ionomer cement, group 2, 3 and 4 were filled with the chamfer, knife edge and butt joint shaped glass ionomer cement respectively and silux plus/scotchbond 2$^{(R)}$ by sandwich technique, group 5 was lined with Dycal$^{(R)}$ and filled with silux plus/scotchbond 2$^{(R)}$ by bulk filling technique. All the specimens were then thermocycled in a range of $4^{\circ}C-60^{\circ}C$ by and immersed in 2% methylene blue dye solution for 24 hours, and sectioned mesiodistally with carborundum disk into two parts under water spray. All the specimens were observed at the occlusal and gingival margins and statistical analysis was performed. The obtained results were as follows : 1. At the occlusal margins, group 2, 3, 4 and 5 showed less marginal leakage than group 1 (p<0.05) and there were not significant differences among group 2, 3, 4, and 5. 2. At the gingival margins, group 5 showed the least marginal leakage and group 4 and 5 showed less marginal leakage than group 1, 2 and 3 (p<0.05). 3. In the laminated groups, group 4 showed less marginal leakage than group 2 and 3 at the gingival margins. 4. In comparison to the occlusal and gingival margins, all groups showed less marginal leakage at the occlusal margins than at the gingival margins (p<0.05).