• Korean Journal of Microbiology
• /
• v.48 no.2
• /
• pp.93-101
• /
• 2012

We analyzed mupirocin resistance rates among staphylococcal isolates collected from a Korean hospital in 2003 (100 isolates), 2005 (195 isolates), 2006 (151 isolates), and 2009 (112 isolates). In Staphylococcus aureus, rates of high-level mupirocin resistance (MIC, minimal inhibitory concentration ${\geq}512{\mu}g/ml$) decreased and did not appear since 2005. In contrast, low-level mupirocin resistance (MIC $8-256{\mu}g/ml$) was not detected in 2003 and 2005 but its rates later increased to 6.9% in 2009. Total resistance rates of coagulase-negative staphylococci (CNS) were significantly higher than those of S. aureus. The rates of high-level resistance of CNS increased from 16.0% in 2003 to 31.5% in 2009. The rate of low-level resistance of CNS was 8.0% in 2003 and around 11% later. In all high-level resistant isolates, the ileS-2 gene was detected. All low-level resistant isolates contained the known V588F mutation in ileS gene. Previously unknown mutations such as V458G in S. aureus and D172A, Y490H and I750V in CNS were identified additionally. One S. aureus isolate with high-level resistance was resistant to oxacillin and several topical antibiotics commonly used for the treatment of skin infection. Ten S. aureus isolates with low-level resistance were also resistant to all of these antibiotics except fusidic acid. CNS isolates with high-level (61 isolates) and low-level resistance (27 isolates) exhibited significantly higher resistance rates to these antibiotics than mupirocin-susceptible CNS isolates (167 isolates). In conclusion, prevention of the emergence of mupirocin resistance is necessary for the effective treatment of skin infection by staphylococci.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.1-11
• /
• 2009

Statement of problem: There are two methods of color choice for the esthetic restoration. One is visual shade matching which draws a comparison between shade guide and teeth in dentist's own eye and the other is using a digital shade analysis system recently introduced. Although the visual shade matching has a lot of problems, decision of color by this visual shade matching and the ways of expression for the decided color are still applicable to clinical dentistry. Purpose: This study is designed to investigate shade guides used in the dental clinics and laboratories have the same value using ShadeEye-$NCC^{(R)}$ dental chroma meter (Shofu Inc., Kyoto, Japan) using shade guide are evaluated. Material and methods: At the first experiment, eight Vita Lumin Vacuum shade guides (Vident Inc., California, USA) were collected from the dental clinics. A1 and B1 shade tabs are chosen and the colors are analyzed five times each in both tooth and porcelain modes by digital shade analysis system, ShadeEye-$NCC^{(R)}$. In the second experiment, twelve Vita shade guides using practically in the dental clinics and laboratories were collected and also A1 and B1 shade tabs are chosen and the colors of A1 and B1 are analyzed one time each in both tooth and porcelain modes by ShadeEye-$NCC^{(R)}$. Results and conclusion: There were significant differences among eight shade guides in terms of shade (chroma), value and hue in both of A1 and B1 (P<.05). Shade guides using in present both dental clinics and laboratories did not show significant differences, except A1 in the porcelain mode, it showed significant differences (P<.05) in the shade even though the shade tab has the same name.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.197-210
• /
• 2012

In this research, we executed a questionnaire survey targeting men and women in 20' or more who reside in the metropolitan area and have experienced purchasing the vehicles in order to study how Promotion Mix Activity affects Brand assets, and ultimately what kind of relation it has with Purchase intention. In the statistical process of collected data, we analyzed the data by using SPSS 12.0 for Windows statistical package and AMOS 7.0 program. As the result of analysis, first, when we analyzed the relation of the Promotion Mix Activity and Brand Assets of the companies, the more affirmative the assessment on the advertising activities of the companies was, the higher the brand popularity, royalty and image increased, And it appeared that as the assessment on PR activities of the companies got more affirmative, the brand popularity, image and royalty increased. Second, as the result of the analysis of the relation between salespersons' Promotion Activities and Brand assets, it appeared that salespersons' social capacity improved Brand awareness and royalty and their strategic capacity improved Brand awareness, royalty and image. Third, seeing the result of the analysis on the relation between Brand assets and Purchase intention, it was shown that Brand popularity had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention, and Brand royalty had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention. In addition, it appeared that Brand image had a meaningful positive(+) effect upon satisfaction and repurchase(oral) intention, and finally it could be known that Brand assets had a close correlation with Purchase intention. Therefore, this research established the color marketing strategy as follows. First, we shall build up the functional role such as aesthetic favor, information communication, protection of ecosystem, publicity reinforcement etc. so as to emphasize the properties of the package design; second, we have to construct the color marketing strategy to convey the images of the commodity besides the psychological and physiological utility which colors grants, the utility used in visual conveyance as communication media; third, we should build the color marketing strategy for the integration of company image; finally we have to compose the colors fitted for the company and product style and introduce design marketing using company colors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.423-430
• /
• 2003

The teeth bleaching with bleaching agent is widely used at recent times. Until yet the exact mechanism of the bleaching agent isn't known but it is thought that is by the complex reduction-oxidation reaction of the decomposed free radical from bleaching agent through various ways. In other words, it is supposed that the teeth are whitened by agent's changing chemical structures of stain-causing materials. The purpose of this study is to exam the change of the dentinal character by bleaching agent and to evaluate the safety of this agent. For this study, after applying 10% carbamide peroxide to enamel of human premolar for 6 hours a day for 2 weeks we examined changes of surface morphology, microhardness, composition and contents of minirals in human dentin using SEM, microhardness tester, FT-Raman spectrometer and EPMA and got following results. There was no significant difference in surface morphologic change when we examined the effect of 10% carbamide peroxide which penetrated into dentin after applied on enamel surface comparing with result from specimen in distilled water No change was shown on the surface of peritubular and intertubular dentin within the nanometeric range. The microhardness between bleached teeth and teeth stored in distilled water showed no statistically significant difference FT-Raman spectra of dentin exhibited no change of the component in human dentin. Only the least change in peaks of organic and inorganic materials were detected in Raman intencity. The total content of mineral elements in dentin with no treatment, stored only in distilled water and stored in distilled water after bleaching were $98.73{\pm}1.89,\;98.56{\pm}2.11\;and\;97.47{\pm}2.51$ respectively. Also they showed no statistically significant difference. From above results, the effect of 10% carbamide peroxide bleaching on structure of dentin is very low and the results may confirm the safety of this bleaching agent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.144-150
• /
• 2017

Purpose: The aim of this in vitro study is to investigate load bearing capacity of esthetic abutments according to the type of material and wall thickness. Materials and methods: 70 specimens equally divided into seven groups according to their abutment wall thicknesses. The abutments prepared with titanium 0.5 mm wall thickness were used as a control group (Ti-0.5), whereas zirconia abutments and resin nano ceramic abutments with wall thickness 0.5 mm, 0.8 mm and 1.0 mm were prepared as test groups (Zir-0.5, Zir-0.8, Zir-1.0 and RNC-0.5, RNC-0.8, RNC-1.0). All specimens were tested in a universal testing machine to evaluate their resistance to fracture and all of them underwent thermo-cycling before loading test. Mean fracture values of the groups were measured and statistical analyses were made using two-way ANOVA. Results: Zir-1.0 showed the highest mean strength ($2,476.3{\pm}342.0N$) and Zir-0.8 ($1,518{\pm}347.9N$), Ti-0.5 ($1,041.8{\pm}237.2N$), Zir-0.5 ($631.4{\pm}149.0N$) were followed. The strengths of RNC groups were significantly lower compared to other two materials (RNC-1.0 $427.5{\pm}72.1$, RNC-0.8 $297.9{\pm}41.2$) and the strengths of all the test groups decreased as the thickness decreases (P < .01). RNC-0.5 ($127.4{\pm}35.3N$) abutments were weaker than all other groups (P < .05). Conclusion: All tested zirconia abutments have the potential to withstand the physiologic occlusal forces in anterior and posterior regions. In resin nano ceramic abutments, wall thickness more than 0.8 mm showed the possibility of withstanding the occlusal forces in anterior region.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1761-1771
• /
• 2007

The artificial exaggeration of stage costumes is thought to be one of the major techniques of enhancing dramatic expression on stage, whichever for visual impact or symbolic effect of dramatization. In the history of stage dressing, a variety of styles has been tried using different materials and production techniques. This may be reviewed as an effort to express dramatic effects more effectively. As this trend became obvious in Europe after the Second World War, this study analyzes the stage costume to deepen our understandings of the role of costumes in expressing dramatic effects. To accomplish this, we first summarized the history of stage costume materials and technical advance and chose five major cases representing the history of stage costume since the Second World War in Europe based on aesthetic and creative aspects: 1) Simplified stage of Jacques Copeau, 2) Stylized stage of Bertolt Brecht, 3) Essential stage of Grotowski, 4) Measured stage of Robert Wilson the Master, and 5) Post-dramatic stage of Philippe $Decoufl\'{e}$. In each of particular case, the historical, material and dramatic contexts were examined as well as different material-effects. The results are as followings: 1) Costume for Copeau's simplified stage: its simplicity plays a supporting role to the gesture of actors(intensifying effect). 2) Costume for Brecht's stylized stage: the artificial stylization integrates into the play with the importance approximately equal to the actors's acting. 3) Costumes for Grotowski's essential stage: costumes disappeared to emphasize only actor's presence on stage. 4) Costumes for Robert Wilson's measured stage: costumes made concrete impression to the extent of obtaining the same importance of actor's body among other stage art elements(lighting, sound, props, actor, text, etc). 5) Costumes for Decoufle's post-dramatic stage: costumes in the era of multi technology possess multi functional aspects that surrogate actors' body. This study suggests that stage costumes take an important part in dramaturgy to the extent that the intent of dramaturgy can be induced enough from stage costume. Thus, costume makers are expected to incorporate the appropriate dramatic factor more than before.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.385-396
• /
• 2007

This study proposed a new classification system for maxillary anterior alveolar ridge deformities based on CAT-scan implant simulation as a useful concept in order to more precisely predict treatment outcomes and the necessity for ridge augmentation prior to implant placement. The results indicate that a high number of cases in the maxillary anterior area would require augmentation procedures in order to achieve ideal implant placement and restoration.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.549-557
• /
• 1997

This study was designed to investigate the attrition pattern in Angle Class III malocclusion with facial asymmetry. The sample consisted of three groups, the 20 subjects of normal occlusion group(Group I), the 12 subjects of class III malocclusion without facial asymmetry group(Group II) and 17 subjects of Class III malocclusion with facial asymmetry group(Group III). Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date processing. Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date Processing. All attrition areas were measured 2 times and the average value was used for data processing The data were statistically analyzed by SAS program. The results of this study were as follows. 1. Total attrition area in Group I was larger than in Group II and III. 2. There was no significant difference in attrition area between right and left side in each group, but attrition area in Group III was larger than in Group I and II. 3. In Group I, Maxillary attrition area was larger than mandibular attrition area, but in Group ll and III, there was no significant difference in attrition area between maxilla and mandible. 4. In Group III, the attrition area of deviated side was target than undeviated side 5. There was no significant difference in attrition area between chewing side and non-chewing side in each group. 6. The total attrition area was unaffected by gender.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.346-353
• /
• 2011

Purpose: The peri-implant soft tissue is remodeled by the initial marginal bone resorption affecting the prognosis and esthetic result of treatment. Thus various designs on implant neck design are studied to preserve peri-implant bone. The purpose of this study is to review on the causes of initial marginal bone resorption, the configuration of peri-implant soft tissue, and the implant crestal module favorable in preserving peri-implant tissue. Materials and methods: The studies on the causes of initial marginal bone resorption and the implant crestal modules are researched and reviewed using Pubmed database. The implant crestal modules including one piece and two-piece implant, internal and external hex abutment, taper and butt joint connection, scalloped design abutment, and platform switching concept are reviewed. Results: A number of clinical and experimental studies preferred one piece implant to two-piece in preserving initial peri-implant tissue. For two piece implants, internal hex abutment and taper joint connection appear more favorable than external hex abutment and butt joint connection relatively. Controversial issues still exist on scalloped design requiring more studies on it. Although the rationale is not certain, the concept of platform switching seems favorable in preserving initial peri-implant tissue based on clinical and experimental studies. Conclusion: Each implant crestal module contains its own advantages and disadvantages with various controversial issues. In the aspect of preservation of initial peri-implant tissue, however, one-piece implant seems beneficial. In cases when two-piece implant is more appropriate due to prosthodontic concerns or any other problems, the application of platform switching concept, internal connection abutment, and taper joint connection may be favorable for the preservation of peri-implant tissues.