• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.31-40
• /
• 2019

In Korea, 51,013 thousand tons of livestock manure was generated in 2018. A total of 46,530 thousand tons, which is 91.2% of the total amount of livestock manure generated, was treated by composting(40,647 thousand tons) or liquid fertilization(5,884 thousand tons) method. At present, the policy of livestock manure treatment in Korea is to make livestock manure into organic fertilizer(compost, liquid fertilizer) and then to applicate it on agricultural land. And this policy is very effective in terms of livestock manure treatment and nutrient recycling. However, considering the steadily declining farmland area for decades, the use of livestock manure compost could be limited in the future. There is also concern that local nutrient overloading, nutrient management regulation, and restrictions on the number of livestock may become serious problem for livestock manure treatment. In addition, there are some opinions that nutrient derived from livestock manure may flow into tributaries of major dams. In recent years, there has been a suspicion that fine dust may be generated from livestock manure compost. In recent years, the use of livestock manure fertilizer has been rapidly increasing, there is a growing demand of the development of new technologies for livestock manure treatment. Especially, cow excretes a larger amount of manure than other livestock, so that the efficiency of development of new technology for cow manure treatment will be high. Therefore, in this study, the combustion characteristics of cow manure pellet were investigated in order to analyzed whether cow manure could be used as source of solid fuel. During the combustion test, the weight loss of the cow manure pellet began to increase when the temperature of the combustion chamber reached $300^{\circ}C$. The ratio of $H_2$, $CH_4$, CO in the pyrolysis gas produced in the pyrolysis process of cow manure pellet were 6.65~11.62%, 0.58~1.54 and 11.47~14.07%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.282-293
• /
• 2018

The heading response of rice varieties is determined by the combined effects of their basic vegetative phase (BVP), photoperiod-sensitivity (PS), and thermo-sensitivity (TS). This study was performed to analyze the effect of differences among heading ecotypes of rice on their heading response in the field. To do this, we investigated the heading response of 15 varieties grown under different day-length and temperature conditions in a phytotron. The characteristics of heading ecotypes were compared to the heading responses in the field-grown rice varieties that were used in the phytotron experiments. The ranges of these characteristics across the 15 varieties were 18 - 35 days for BVP, 12 - 61 days for PS, and 12 - 35 days for TS. In comparisons of coupled varieties that differed only in a single trait among BVP, PS, and TS, the variety with the longer BVP and that with the higher PS had a longer period from sowing to heading (DTH), while the variety with the higher TS had a shorter DTH. The comparative magnitude of DTH in the coupled varieties followed the PS trait when BVP and PS were involved, the BVP trait when BVP and TS were involved, and the PS trait when PS and TS were involved in the heading response of field-grown rice. When comparing the coupled varieties with different traits of the three examined factors, the heading response was consistent with the PS trait. The DTH in all 15 varieties was significantly correlated with the PS, and the DTH in 9 selected varieties with a relatively small PS was correlated with BVP. The reduced DTH of rice in the July 10 seeding treatment compared to those in the June 25 and May 11 seeding treatments was positively associated with PS, but not with TS. We concluded that the heading response of rice varieties under natural conditions in Korea is mainly governed by the PS trait and is also greatly affected by the BVP trait when the PS is small.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• Journal of Ginseng Culture
• /
• v.1
• /
• pp.43-56
• /
• 2019

Korean ginseng (Panax ginseng) has been known as one of the representative special and healthful products originating from Korea for 4500 to 5000 years. The word of ginseng was first mentioned in JiJuZhang(急就章), written by ShiYou during the reign of King Yuah Di of the Chien Han Dynasty, China (33-48 BC). It has been known that wild Korean ginseng grows in Korean peninsula including Manchuria and the ginseng is found only between the $33^{rd}$ and $48^{th}$ parellels of north latitude. Since the times of three kingdom in Korea at 4-7 century, which is Kokuryo, Baekje and Shila, Korea has been the chief ginseng producing country. A large quantity of ginseng was exported from Korea to China for medicinal use at that times. That was written in SamGukSaGi(三國史記) by BuSik Kim of Koryeo Dynasty in Korea in 1145. The cultivation of Korean ginseng was also recorded in Bencaogangmu(本草綱目) written by LiShi Zen during the regin of the Ming Dynasty in 1596, China. The ginseng seedling, which was known as an original method invented by imitating the method of rice transplantation, appeared in the SeungJeongWon Ilgi(the diaries of the royal secretariat, 承政院日記), 1687 in the regin of King SukJong in Korea. It was suggesting that ginseng cultivation was firstly established in the early 1600s in Korea. On the other hand, red ginseng(written as 熟參) was reported firstly in GoRyeoDoGyeong(高麗圖經)(a record of personal experience in Korea, written in 1123) by SeoGung in Song Dynasty, China. The names of Pansam(written as 板蔘) and Pasam(written as 把蔘), which were the another types of red ginseng products, were came on in the JoSeon Dynasty Annals in 1552 and 1602, respectively. Although the term of red ginseng(Hongsam in Korean) was firstly appeared in the JoSeon Dynasty Annals in 1797, it is believed to have been developed a little earlier periods from the King Jungjong(1506~1545) to the King SeonJo(1567~1608) in Korea. Then, the Korean red ginseng has begun production on a large scale in SamJeong Department of NaeJangWon(內藏院 蔘政課) in the Korean Empire(大韓帝國) in 1899. More detailed records about red ginseng production method were written in the SohoDanag Miscellany(韶濩堂集) by Taekyoung Kim at 1916 year in Korea. On the while, the efficacy of ginseng was first recorded in Shennongbencaojing(神農本草經) written in China(BC 83-96) and the efficacy has been continuously inherited.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.595-604
• /
• 2018

In this study, in a bid to develop natural bioadhesives for paper craft, the hanji industry, and preserving cultural assets, complex polysaccharides were extracted from brown and red algae and used as an ingredient in adhesives. Brown algae include sea trumpet, kelp, sea oak, and sea mustard, whereas red algae include Pachymeniopsis elliptica agar-agar weed, Gloiopeltis tenax, and hunori. The polysaccharides were extracted after transforming them from non-aqueous Ca complexes contained in each of the brown and red algae into water-soluble polysaccharides containing alkali metals with a solubility level of 1. and extracted Subsequently, only the polysaccharides were extracted using alcohol precipitation. The adhesion tensile strengths of kelp, a brown algae, and Pachymeniopsis elliptica, a red algae, were 21.58 and 32.99 kgf, respectively. They thus demonstrated better adhesion than that of solid glue products such as water plants (18.45 kgf) and glue sticks (20.45 kgf). The extraction yield of these polysaccharides is supposed to be determined according to their extracted environments; however, no difference in adhesion strength was seen. Further, it was found that the shapes of polysaccharides were determined by their growing environment instead of extraction environment. Use of multi-step alcohol precipitation method during extraction enabled the removal of the constituents except protein and other polysaccharides, thereby demonstrating a stable outcome without cultivation of mold. Furthermore, there was no occurrence of mold even after production of the adhesives by the simple solution method, which demonstrates the adhesive's potential as an environment-friendly adhesive material.

• The Korean Journal of Archival Studies
• /
• no.55
• /
• pp.39-71
• /
• 2018

The purpose of this study is to examine the reality of the records management of the National Assembly members and suggest a desirable alternative. Until the Public Records Management Act was enacted in 1999, the level of the records management in the National Assembly was not beyond that of the document management in both the administration and the legislature. Rather, the National Assembly has maintained a records management tradition that systematically manages the minutes and bills since the Constitutional Assembly. After the Act was legislated in 2000, the National Assembly Records Management Regulation was enacted and enforced, and the Archives was established in the form of a subsidiary organ of the Secretariat of the National Assembly, even though its establishment is not obligatory. In addition, for the first time, an archivist was assigned as a records and archives researcher in Korea, whose role is to respond quickly in accordance with the records schedule of the National Assembly, making its service faster than that of the administration. However, the power of the records management of the National Assembly Archives at the time of the Secretariat of the National Assembly was greatly reduced, so the revision of the regulations in accordance with the revised Act in 2007 was not completed until 2011. In the case of the National Assembly, the direct influence of the executive branch was insignificant. As the National Assembly had little direct influence on the administration, it had little positive influence on records management innovation under Roh Moo-Hyun Administration. Even within the National Assembly, the records management observed by its members is insignificant both in practice and in theory. As the National Assembly members are excluded from the Act, there is no legal basis to enforce a records management method upon them. In this study, we analyze the records management problem of the National Assembly members, which mainly concerns the National Assembly records management plan established in the National Archives. Moreover, this study proposes three kinds of records management methods for the National Assembly members, namely, the legislation and revision of regulations, the records management consulting of the National Assembly members, and the transfer of the dataset of administrative information systems and websites.

• Journal of agricultural medicine and community health
• /
• v.43 no.4
• /
• pp.258-269
• /
• 2018

Objectives: There was an outbreak of foodborne and waterborne disease among high school students at Okcheon in June, 2018. First attack occurred June $5^{th}$ but seven days later it was notified. The purpose of this investigation was to evaluate the pathogen of outbreak and cause of delayed notification. Methods: First, we did a questionnaire survey for 61 cases and 122 controls to find what symptoms they had and whether they ate foods or drank water from June $2^{nd}$ to June $12^{th}$. Second, we investigated the environment of cafeteria and drinking water. Third, we examined specimen of cases and environment to identify bacteria or virus. Results: Attack rate of this outbreak was 7.8%. Drinking water was strongly suspected as a source of infection in questionnaire survey but we could not find the exact time of exposure. Norovirus was identified in specimen of cases (2 students), drinking water (at main building and dormitory) and cafeteria (knife, dishtowel, hand of chef) Conclusions: We decided norovirus as the pathogen of this outbreak based on the clinical features of cases with diarrhea vomiting, abdominal pain and recovery within 2 or 3 days after onset, outbreak due to drinking water and microbiologic examination, And the cause of delayed notification might be the non-existence of the nurse teacher at that time and the lack of understanding of teachers on immediate notification under the outbreak. To prevent the delayed notification, notification system about outbreak of foodborne and waterborne disease in school is needed to be improved.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.727-735
• /
• 2018

Targeting the radiological technologists working in Gyoungsangnam province, this study was performed to obtain the fundamental data to improve the competency and right awareness of the hospital infection management, and to educate infection management of radiological technologists by analyzing the status, awareness, and performance of the hospital infection management. During April 1, 2018 to April 31, 2015, after we sent out a total of 400 questionnaires for the survey to radiological technologists working at the clinic located in Gyoungsangnam province, 320 questionnaires suitable for research were analysis by using SPSS 18.0 statistical analysis software. As the hospital infection management factors, 5 items for hospital infection and 60 items of the awareness and performance for the hospital infection management were used. 60 items of the awareness and performance for the hospital infection management were consisted hand hygiene, personal hygiene and clothing, medical equipment and supplies, cleaning and waste, examination and environment. And as the sociodemographic characteristics, the gender, marriage, age, level of education, working organization, working period, and working department were used. Consequentially, the awareness for the hospital infection management($4.19{\pm}.60$) and the performance($4.22{\pm}.52$) were confirmed as high level. Using these results, the hospital infection management level of the radiological technologists working in Gyoungsangnam province was found to be high in arareness and performance of hospital infection management. There was a significant correlation between the degree of awareness and performance of radiological technologists for hospital infection management. Furthermore, in the multiple regression analysis of cognitive factors on performance, it was found that 66.1% explanatory power had a significant positive influence. In order to improve the awareness of hospital infection management of radiological technologist working in various departments, the infection management education and improvement of hospital work environment are necessary. And also, It is important to participate actively in hospital infection management and preventive education and to play a pivotal role in securing expertise in hospital infection management.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.4-25
• /
• 2013

Goli-su is the innovative special kind of the embroidery technique, which combines twining and interlacing skill with metal technology and makes the loops woven to each other with a strand. The loops floating on the space of the ground look like floating veins of sculpture and give people the feeling of the openwork. This kind of characteristic has some similarities with the lacework craft of Western Europe in texture and technique style, but it has its own features different from that of Western Europe. It mainly represents the splendid gloss with metallic materials in the Embroidered cloth, such as gold foil or wire. In the 10th century, early days of Goryo, we can see the basic Goli-su structure form of its initial period in the boy motif embroidery purse unearthed from the first level of Octagonal Nine-storied Pagoda of Woljeong-sa. In the Middle period of Joseon, there are several pieces of Goli-su embroidered relic called "Battle Flag of Goryo", which was taken by the Japanese in 1592 and is now in the Japanese temple. This piece is now converted into altar-table covers. In 18~19th century, two pairs of embroidered pillows in Joseon palace were kept intact, whose time and source are very accurate. The frame of the pillows was embroidered with Goli-su veins, and some gold foil papers were inserted into the inside. The triangle motif with silk was embroidered on the pillow. The stitch in the Needle-Looped embroidery is divided into three kinds according to comprehensive classification: 1. Goli-su ; 2. Goli-Kamgi-su ; 3. Goli-Saegim-su. From the 10th century newly establishing stage to the 13th century, Goli-su has appeared variational stitches and employed 2~3 dimensional color schemes gradually. According to the research of this thesis, we can still see this stitch in the embroidery pillow, which proves that Goli-suwas still kept in Korea in the 19th century. And in terms of the research achievement of this thesis, Archetype technology of Goli-su was restored. Han Sang-soo, Important Intangible Cultural Heritage No. 80 and Master of Embroidery already recreated the Korean relics of Goli-su in Joseon Dynasty. The Needle-Looped embriodery is the overall technological result of ancestral outstanding Metal craft, Twining and Interlacing craft, and Embroidery art. We should inherit, create, and seek the new direction in modern multi-dimensional and international industry societyon the basis of these research results. We can inherit the long history of embroidering, weaving, fiber processing, and expand the applications of other craft industries, and develop new advanced additional values of new dress material, fashion technology, ornament craft and artistic design. Thus, other crafts assist each other and broaden the expressive field to pursue more diversified formative beauty and beautify our life abundantly together.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.