• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.5
• /
• pp.13-21
• /
• 2000

In this paper, we investigate the performance improvement by applying flow control to LonWorks-based network systems which support various communication media together with interpretable class of systems. To this end, we introduce a circular queue at each node of industrial network systems usually operated in open loop. Then we utilize the feedback information of the number of data in a queue, the data arriving interval in a queue and channel error to make the overall industrial network system in closed loop. We verify the improved performance of the network systems in view of throughput and fairness measures via the experimental results conducted in several field situation.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.377-379
• /
• 2005

실험실 규모의 토양컬럼을 사용하여 고농도의 암모니아성 질소의 질산화 영향을 실험한 결과 다음과 같은 결론을 얻었다. 1) 유입수 NH$_{4}$-N의 농도 50 mg/L와 100 mg/L인 경 우 HRT 48시간에서도 NH$_{4}$-N가 99%정도 제거되었으며 유출수 평균 NO$_{3}$-N의 농도는 각각 46.3 mg/L와 98.3 mgh로 유입수 NH$_{4}$-N는 대부분 NO$_{3}$-N로 전환되었다. 2) 유입수 NH$_{4}$-N의 농도 200 mg/L인 경우 HRT 48시간에서 NH$_{4}$-N의 평균제거율이74.8%에 머물렀으나 토양컬럼 내부에 폭기장치를 설치한 결과 NH$_{4}$-N의 평균제거율은 94.7%로 개선되는 효과를 나타냈으며, 유입수 NH$_{4}$-N의 농도 400 mg/L인 경우에는 HRT 72시 간에서도 질산화가 불안정하였으나 마찬가지로 강제 폭기를 실시 한 결과 질산화가 증가하는 경향을 보였다. 4) 실험종료 후 토양컬럼 내부의 암모니아 및 아질산 산화세균을 조사한 결과 각각 1.4${\times}$10$^{5}$과 2.3${\times}$ 10$^{6}$ MPN/g${\cdot}$soil까지 증가하였다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.377-381
• /
• 2006

실험실 규모의 토양컬럼을 사용하여 도금폐수처리장의 유출수를 대상으로 처리한 결과 다음과 같은 결론을 얻었다. 1) 유입수 $NH_4-N$의 대부분은 질산화 토양컬럼에서 질산화 되었으며 HRT가 단축되면 제거율이 낮아졌다. 2) 질산화 토양컬럼에서 생성된 $NO_3-N$은 탈질 토양컬럼에서 탄소원이 없으면 탈질이 이루어지지 않지만 탄소원으로 메탄올을 주입하면 대부분의 $NO_3-N$는 탈질되었다. 3) 탈질 토양컬럼에서 HRT 72시간일때 T-N 제거율은 81.5%이었고 HRT 48시간일 때는 77.8%이었다. 4) 유입수 평균 T-P농도는 13.06 mg/L이고 탈질 토양컬럼에서의 유출수 평균 T-P는 0.83 mg/L로 제거율은 96.83% 이었다. 5) 실험기간 동안의 COD변화는 탄소원으로 메탄올 주입했 때와 HRT 변화시를 제외하고는 25 mg/L이하로 처리되었으며, 질산화 토양컬럼에는 폐굴껍질을 충진한 결과 $NO_3-N$의 생성에도 불구하고 pH 8.5정도를 유지할 수 있었다.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.266-270
• /
• 1989

Insect cell cultures were performed in laboratory-scale vessels. The batch growth of insect cells was affected by such parameters as serum content, other nutrients, seeding density, and mechanical agitation. Lactate and ammonium were not likely to be environmental factors that inhibited cell growth at the concentrations observed at the end of batch cultures. In addition, redox potential was found to be a useful index in monitoring low-level dissolved oxygen during the cultivation of insect cells. Recombinant protein production by cells infected with a genetically-modified baculovirus was also demons treated. The maximum beta-galactosidase synthesis of 2800 units per reactor volume was achieved at the dilution rate of $0.006hr^{-1}$.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.160-164
• /
• 1981

A study was conducted for process conditions for maximum yield of crude soy lecithins and its quality improvement by solvent extraction. Results indicate that maximum yield of the crude lecithins was obtained by hydration with 3% water at degumming temperature $75^{\circ}C$. On the other hand, water level used for hydration was found to affect the recovery yield of the lecithins more profoundly than the degumming temperature. It was also found that extractions with acetone and 2-propanol increased the phosphatidyl choline content from 19.7% to 28.3% and 58%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1988-1992
• /
• 2011

Polypropylene (PP)-SEBS/silicate composites with PP content of 35, 40, and 45wt% were fabricated by melt compounding at $200^{\circ}C$, using lab scale Brabender mixer. The content of silicate was fixed at 5wt%. The thermal properties of the PP-SEBS/silicate composites were investigated by differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). The melting temperature of PP-SEBS compound decreased up to $141^{\circ}C$ with SEBS content. TGA result indicates an increase in degradation temperature when the silicate was added in the PP-SEBS compound. The rheological properties of the compounds were measured by dynamic Rheometer. PP-SEBS/silicate composite indicates higher shear thinning and elastic property than PP-SEBS compound. Van Gurp-Palmen analysis was applied in order to certify an increase in elasticity.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.82-93
• /
• 2014

A starch ball was devised to conveniently supply carbon source to indigenous microorganisms and to enhance biotransformation of explosive compounds(TNT and RDX) in the sediments of settling basins installed in military shooting ranges. To identify optimum dose/sediment ratio for degradation of explosives in the basin, a series of bench scale settling basin experiments were performed for 30 days while monitoring supernatant pH, DO, concentrations of nitrite, nitrate, sulfate, explosive compounds, and acute toxicity measured by bacterial luminescence. Addition of starch ball induced changes in oxidation conditions from oxic to anoxic in the benthic zone of the basin, which resulted in subsequent reductive degradation of both TNT and RDX in the liquid and solid phase of basin. However, fermentation products of excess starch, acetic acid and formic acid, caused acute toxicity in the liquid phase. The optimum ratio of starch ball/sediment for explosive compounds degradation by inducing changes in bio-geochemical environments without increase in acute toxicity, was found to be 0.009~0.017.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.105-110
• /
• 2007

We investigated resin, thinner, painting, and injection for analyzing the chemical effect of polymer, and made the optimum solution with the best performance of ABS (acrylonitrile butadiene styrene) resin. The effect depended on chemical material especially its chemical and physical properties instead of mechanical transformation. When we looked over ABS resin, injection, chemical material and painting, we found out thinner was the main factor for painting problem. Throughout this test, we could solve the problem, secure the system for control process and drop many factors for changing quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3735-3740
• /
• 2012

In this paper, the performance of power generation for the energy harvesting block with a combination of piezoelectric technology and electromagnetic technology among various energy harvesting technologies was investigated. The goal of this study is to evaluate on the applicability of our developed energy harvesting block into the field of urban & housing. First, we carried out a finite element vibration analysis and evaluated the performance of power generation for the multi-layer energy harvester at laboratory scale. Second, we described the features of our developed prototype module that includes amplification technologies to improve power density per module and evaluated the performance of power generation for the energy harvesting block in a variety of ways. Finally, we suggested the direction for the improvement of the energy harvesting block module.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.134-134
• /
• 2019

전 지구적 기후 변화가 진행함에 따라 극심한 강우가 증가하고 그로인해 하천의 유량과 유속이 증가하여 제방의 침식 또는 하상의 여러 변화가 일어나 문제가 되고 있다. 이를 예방하기 위한 국내 하천사업에는 호안공법과 높은 유속의 흐름에서도 유실이 되지 않는 하상재료에 대한 다양한 연구들이 진행되고 있으며, 호안공법을 도입 할 때 유속과 하상재료에 따라 하상변화에 미치는 영향을 파악하고 하상재료의 유실과 직접적인 관계가 있는 허용 유속, 소류력에 대해 평가하고 설계하는 것은 하천설계기준에 있어 매우 중요하다. 본 연구에서는 콘크리트와 같이 수질오염을 유발하지 않는 친환경 신소재를 활용하여 실제 제방과 하상에 사용되고 있는 재료인 모래와 황토를 혼합하여 이용하였으며 유속 6 m/s까지 재현이 가능한 실험실 규모의 무경사고속수로와 실시간 데이터측정 장치를 이용하여 유속과 소류력의 상관성을 분석 및 흐름특성을 파악하고 하상의 재료에 대한 적용성을 검토하며 재료에 대한 유실정도를 평가하였다.