• Journal of the KSME
• /
• v.35 no.6
• /
• pp.525-541
• /
• 1995

본 연구는 미국과 유럽에서 각각 제정한 실차시험에 의한 측면충돌시 승객보호 기준에 대한 성 능요건, 기준설정 배경, 시험법, 사용되는 인체모형 등을 연구하고, 국내의 측면충돌 사고율, 사 고유형별 인명 및 재산피해 등을 분석해 보았으며, 자동차 사고의 조사 내용 및 항목을 알아 보았다.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.91-100
• /
• 2007

The most important thing for driver's safety on the road is equipment of crash cushion as a vehicle protection safety facility. But development of crash cushion is defective because there's no rational and reality way of design. And also without an alternative plan, it rely on crash test hereby it suffers a great economic loss and wastes time. This study that uses data of cash test proves the suitability of single degree of freedom which considers the safety of passengers about three-dimensional complicated Crash Analysis. As the study analyzes the conduct of crash cushion, it want to develop the effective method of design on Single Degree of Freedom Crash Cushion. And it presents the way of crash cushion design through making a crash analysis model with single degree of freedom. To verify the validness of the crash cushion plan, with single degree of freedom plan, we make the level CC2 crash cushion and execute the crash test. A performance test brings satisfied result and a plan of single degree of freedom crash cushion is proven as an one of the way to be a good system which can design crash cushion.

• Journal of Hydrogen and New Energy
• /
• v.19 no.4
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.171-176
• /
• 2016

This paper proposes road safety facilities applying Hot-dip zinc-aluminum-magnesium alloy-coated steel sheets and coils to reduce the loss of function caused by the corrosion of steel in the service state. Vehicle crash simulations and full-scale crash tests were carried out to provide reliable information on evaluating the crash performance with the products of road safety facilities built with hot-dip zinc-aluminum-magnesium alloy-coated steel. From the results of the simulations and full-scale crash tests, the impact behaviors evaluated by the three-dimensional crash simulations considering the strain-rate dependency in a constitutive model were similar to those obtained from the full-scale crash test results. The full-scale crash test results met the crashworthiness evaluation criteria; hence, the proposed bridge barrier in this paper is ready for field applications.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.180-183
• /
• 2006

엔진 밸브와 밸브시트의 마모는 엔진 성능에 영향을 미치는 가장 중요한 요소 중에 하나이다. 엔진 밸브와 밸브시트는 엔진 구동 과정에서 발생하는 고온의 배기가스, 밸브 스프링의 빠른 움직임, 엔진 폭발 과정의 고압, 균일하지 못한 냉각시스템으로 발생하는 실린더 헤드의 뒤틀림이 만들어 내는 극한 환경을 이겨내야 한다. 본 연구에서는 밸브 및 밸브시트의 마모율과 마모 메카니즘을 명확하게 규명하기 위해서 실제 자동차 엔진 내부의 조건인 온도, 밸브와 밸브시트간의 충돌, 스라이딩 등에 관한 것들을 고려하여 밸브 및 밸브시트가 충돌 시험할 수 있는 전용마모 시험기를 사용하였다. 본 연구에 사용된 시편은 현재 실차에 사용되고 있는 밸브와 밸브시트를 사용하였다. 그 종류는 STR35 밸브, STL #6 및 STL #32이다. 밸브시트는 HVS1-2 재질을 사용하였다.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.9-17
• /
• 2011

It is possible to set up the Roadside Barrier which is suitable for Performance Evaluation Criteria by domestic standard. But a number of section of expressway roadside have old guardrail that was installed before reform the guideline. These poor performance guardrails threaten driver's life. There is lots of difficult problem to change old guardrails that are installed 2,777km in expressway of whole road side at the same time. Especially budget problem. The purpose of study is to develop performance improvement guardrails by the minimum reinforcement. In this study, guardrail improvement method(SB1, 3, 5 grade) is developed through crash simulation using LS-DYNA 3D and vehicle crash test. And it's expected not only to decrease of collision accident but to increase safe level. Of course one thing that can't be missing is to reduce a lot of budget of guardrail change.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.71-74
• /
• 2007

We have concentrated on the performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle so far. But for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module. We built the standard to evaluate vibration and collision safety of high pressure storage system for fuel cell vehicle, and could verify reliability of high pressure storage system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.37-40
• /
• 2008

We have concentrated on the performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle so far. But for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module. We built the standard to evaluate and collision safety of high pressure storage system for fuel cell vehicle, and could verify reliability of high pressure storage system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.162-168
• /
• 2013

Recently, there have been efforts in many countries to reduce social expenses and casualties resulting due to car accidents. As such, ASS (active safety systems) are being researched and developed to prevent accidents and target mitigation. Among many useful active safety systems, it has been reported that commercial AEBS (Advanced Emergency Braking System) effectively prevents accidents and reduces casualties simultaneously. Accordingly, it is necessary to set Korean AEBS standards, and this research analyzes international AEBS standards for this necessity. In addition to the evaluation methodology of AEBS ECE Regulation, this study suggests traffic scenarios that occur frequently in domestic road environments, and provides an evaluation system for AEBS of the scenarios. Finally, the performance and safety of AEBS are evaluated through field test.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.49-56
• /
• 2011

The neck injury occupies the most of injury that happened by the rear impact car accident. This study was analyzed about influence of the neck injury in low speed rear impact and car crash accident investigation. There is no neck injury in low speed side rear impact. On the other hand, there is initial neck injury symptom of 10 % but no long-term neck injury symptom in low speed offset rear impact. It appeared that the possibility of neck injury in low speed rear impact is low. For the more study about the neck injury, it should be evaluate the effects of the car body structure, frame structure and rear crash pattern.