• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.28-35
• /
• 2007

Airbone laser altimeters have been utilized for 3D topographic mapping of the earth, moon, and planets with high resolution and accuracy, which is a rapidly growing remote sensing technique that measures the round-trip time emitted laser pulse to determine the topography. The traveling time from the laser scanner to the Earth's surface and back is directly related to the distance of the sensor to the ground. When there are several objects within the travel path of the laser pulse, the reflected laser pluses are distorted by surface variation within the footprint, generating multiple echoes because each target transforms the emitted pulse. The shapes of the received waveforms also contain important information about surface roughness, slope and reflectivity. Waveform processing algorithms parameterize and model the return signal resulting from the interaction of the transmitted laser pulse with the surface. Each of the multiple targets within the footprint can be identified. Assuming each response is gaussian, returns are modeled as a mixture gaussian distribution. Then, the parameters of the model are estimated by LMS Method or EM algorithm However, each response actually shows the skewness in the right side with the slowly decaying tail. For the application to require more accurate analysis, the tail information is to be quantified by an approach to decompose the tail. One method to handle with this problem is proposed in this study.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.145-150
• /
• 2020

The ship motion of large LNG ships affects ships' safety. The purpose of this study was to estimate the transfer function of roll motion among the hull motion of 153,000 m3 class LNG vessels. The ship motion transfer function was modeled using a Linear Time-Invarient system with single input, single output, and transfer function. The transfer function of the ship motion was estimated by the system identification method using single ocean wave as input of the model, and using the roll motion of the LNG ship obtained through ANSYS as the output of the model. The usefulness of the experimental results was evaluated using the precision and estimation rate of the model for cases wherein the different transfer function dimensions. Results of the experiment showed a precision at 99% and 98%, with estimation rate at 78% and 50%. From these results, we found the proposed method of estimating the transfer function of ship motion in this study reasonable. In the future, data of ship motion in actual sea conditions will be acquired and it will be applied to make the construction of models with multiple inputs and multiple outputs for practical use.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.515-522
• /
• 2003

Pharynx is a system transporting foods by peristaltic motion(contraction and expansion movement! into the esophagus and functioning as airway passages. In this study, structural changes of pharyngeal dysfunction are analyzed by biomechanical model using CT and FEM(finite clement method). Loading condition was assumed that equal pressure was loaded sequentially to inside of pharyngeal tissue. In order to analyze the pharyngeal muscular dysfunction by biomechanical model. the pharyngeal dysfunctions was classified into 3 cases. Taking into account the clinical complication by neuromuscular symptoms such as pharyngeal dysfunction after stroke. we assumed that a change of material property is caused by muscular tissue stiffness. A deformation of cross sectional area of the pharynx is analyzed increasing the stiffness $25\%,\;50\%,\;75\%$ in each case on the basis of stress-strain relationship. Based on three-dimensional reconstruction of pharyngeal structure using limited factor - techniques and the optimization procedure by means of inverse dynamic approach. the biomechanical model of the human pharynx is implemented. The results may be used as clinical index illustrating the degree of pharyngeal muscular dysfunction. This study may be used as useful diagnostic model in discovering early deglutitory impediment caused by physiological or pathological pharyngeal dysfunction.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.332-345
• /
• 2019

Maximum dip vector of individual joint plane, which can be uniquely defined on the hemispherical projection plane, has been established by considering its dip and dip direction. A new stereographic projection method for the rock slope analysis which employs the maximum dip vector can intuitively predict the failure modes of rock slope. Since the maximum dip vector is uniquely projected on the maximum dip point of the great circle, the sliding direction of discontinuity plane can be recognized directly. By utilizing the maximum dip vector of discontinuity both the plane sliding and toppling directions of corresponding blocks can be discerned intuitively. Especially, by allocating the area of high dip maximum dip vector which can form the flanks of sliding block the potentiality for the formation of virtual sliding block has been estimated. Also, the potentiality of forming the triangular-sectioned sliding block has been determined by considering the dip angle of joint plane the dip direction of which is nearly opposite to that of the slope face. Safety factors of the different-shaped blocks of triangular section has been estimated and compared to the safety factor of the most hazardous block of rectangular section. For the wedge analysis the direction of crossline of two intersecting joint planes, which has same attribute of the maximum dip vector, is used so that wedge failures zone can be superimposed on the stereographic projection surface in which plane and toppling failure areas are already lineated. In addition the maximum dip vector zone of wedge top face has been delineated to extract the wedge top face-forming joint planes the orientation of which provides the vital information for the analysis of mechanical behavior of wedge block.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.99-110
• /
• 2022

This study attempted to develop a bodice prototype that is the basis for the production of upper body clothing for 20s plus-size women who have distinct characteristics from women with general body types. Through this, it was intended to provide basic data necessary for the development of plus-size women's clothing, which is revitalizing the market due to the increase in the obese population. Through the first evaluation of appearance and abdominal pressure, patterns such as moving the side neck, adding the amount of armhole dart, and adding the amount of sagging were modified. Through the second evaluation, corrections such as vertical side lines, reduction of the neck of the back center line, and adding the amount of armhole darts were performed. Through the third evaluation, the final pattern drafting method was developed by vertically modifying the side line and adding the amount of back armhole darts. In the case of 20s plus-size female body types, a drafting method distinguished from the general body type was required in the method of setting the side and hem due to the protrusion of the abdomen. This study can be said to be meaningful in that it proposed a bodice prototype drafting method suitable for the body type of 20s plus-size women. In the follow-up study, it is thought that the wearability should be evaluated through actual garment wearing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.323-330
• /
• 2023

The development of an analysis model that reflects the microstructure characteristics of polyvinyl alcohol (PVA) fiber-reinforced cementitious composites, which have a highly complex microstructure, enables synergy between efficient material design and real experiments. PVA fiber orientations are an important factor that influences the mechanical behavior of PVA fiber-reinforced cementitious composites. Owing to the difficulty in distinguishing the gray level value obtained from micro-CT images of PVA fibers from adjacent phases, fiber segmentation is time-consuming work. In this study, a micro-CT test with a voxel size of 0.65 ㎛³ was performed to investigate the three-dimensional distribution of fibers. To segment the fibers and generate training data, histogram, morphology, and gradient-based phase-segmentation methods were used. A U-net model was proposed to segment fibers from micro-CT images of PVA fiber-reinforced cementitious composites. Data augmentation was applied to increase the accuracy of the training, using a total of 1024 images as training data. The performance of the model was evaluated using accuracy, precision, recall, and F1 score. The trained model achieved a high fiber segmentation performance and efficiency, and the approach can be applied to other specimens as well.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.293-300
• /
• 2012

This study was to investigate the unsuitable rate of the storage facilities, the changes in corrosion process over time after installation according to the status, the time to install the facilities, years elapsed after facilities installation, inspection of methods and motivation, and so on, based on the results of the inspection at the petroleum storage facilities conducted by domestic soil-relate specialized agency to derive optimal management plans which meet the status of soil contamination facilities. The results showed that the facilities more than 5 years after the initial leak test at the time of the installation need to be inspected periodically by considering costs of leak test and remediation of polluted soil. The inspection period can be decided by cost and leak test methods showing discrepancies for the results obtained from individual test whether it was direct or indirect. To compensate these matters, we suggested that the direct inspection method on regular schedule is recommended. On the other hand, the inspection can be voluntarily completed to ease burden of the results by inspection or equivalent level to this inspection method. Also, it may need improved construction supervision and performance test system to minimize the occurrence of the nature defects in installing the facilities as well as the upgrade program for the facilities during intervals of inspection period.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.1-9
• /
• 2011

This study concerns the Baekje Traditional Garden, one of the open spaces in the Lotte Resort in the Baekje Historical Reappearance Complex, which is part of the comprehensive plan for specific areas in the Baekje cultural area. The Baekje Traditional Garden has historic value, and its excellent garden style influenced the ancient Japanese gardens. This study dealt with three issues: (1) The context in which Lotte Buyeo Resort accepted the Baekje Traditional Garden, particularly the background and process of such; (2) The original form of the Baekje Traditional Garden; and (3) How the Baekje Traditional Garden should be represented in the open space of the resort. Representation is accomplished in two ways: using the structure of the original garden and in the borrowing of elements. For representation using the structure of the original garden, Imrugak was used as the main entrance space, and Wolsunjung was represented from the Ganbuklee remains. In the rear garden are wave watercourses and other garden facilities of the Wanggungri site in Iksan. Borrowing of elements, on the other hand, was accomplished in the plant plan and detailed development. In addition, mountaintops (three mountains and five mountain summits), a clean stream between mountains, and a pine forest are visualized in the garden. This is the representative landscape of the Taoist hermit world that appeared in the Baekje Gilt Bronze Incense Burner and Landscape pattern. The significance of this study is twofold. First, the Baekje Traditional Garden is a fresh trail because there has been no previous research concerning it. Second, while past research concerning traditional spaces focused on the results of representation, this study focused on the process of representation. This means that this research work tried to extend the study concerning the representation of traditional spaces from the conceptual to the practical approach. This study, however, also has its limitations. The authenticity of the representation suggested in this study may be questioned later because efforts have been made to preserve the original Baekje Traditional Garden. In addition, this study should seek a balance between authenticity on one hand and amusement and diversity of experience on the other, because the site is a resort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1697-1707
• /
• 2006

Relentless advances in information technology are constantly transforming market dynamics of the retail industry. RFID is an emerging innovative technology that can reduce labor costs, improve inventory control and increase sales by effective business processes. Apparel retailers need to recognize the benefits of RFID and identify critical success factors. By focusing on apparel retailers, this study attempts (1) to identify the reality of RFID associated with benefits; and (2) to prospect the implementation of RFID in apparel retailing. We conducted a focus group interview with selected six panels who were experts of retail industry in the United States to obtain data regarding RFID attributes. Content analysis was used to generate related excerpts and classify 31 attributes of RFID benefits from the meaningful 173 responses. For experience of RFID, retailers were familiar with RFID technology and expressed the belief that RFID basically would support an existing retail system for speed to markets. However, retailers addressed the level of experience with RFID technology that they were still in the early adoption stage among few innovative companies. The content analysis identified five dimensions of RFID benefits for apparel retailing: Visibility and Velocity, Revenue Enhancement, Customer Service, Security, and Employee Productivity. This result lends support to the belief that RFID has a significant potential to streamline supply chain management, store operation and customer service for apparel retailing. This study provides intellectual and managerial implications far practitioners and researchers by postulating the effective use of RFID in the apparel retail industry.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.42-51
• /
• 2015

In proton therapy, verification of proton dose distribution is important to treat cancer precisely and to enhance patients' safety. To verify proton dose distribution, in a previous study, our team incorporated a vertically-aligned one-dimensional array detection system. We measured 2D prompt-gamma distribution moving the developed detection system in the longitudinal direction and verified similarity between 2D prompt-gamma distribution and 2D proton dose distribution. In the present, we have developed two-dimension prompt-gamma measurement system consisted of a 2D parallel-hole collimator, 2D array-type NaI(Tl) scintillators, and multi-anode PMT (MA-PMT) to measure 2D prompt-gamma distribution in real time. The developed measurement system was tested with $^{22}Na$ (0.511 and 1.275 MeV) and $^{137}Cs$ (0.662 MeV) gamma sources, and the energy resolutions of 0.511, 0.662 and 1.275 MeV were $10.9%{\pm}0.23p%$, $9.8%{\pm}0.18p%$ and $6.4%{\pm}0.24p%$, respectively. Further, the energy resolution of the high gamma energy (3.416 MeV) of double escape peak from Am-Be source was $11.4%{\pm}3.6p%$. To estimate the performance of the developed measurement system, we measured 2D prompt-gamma distribution generated by PMMA phantom irradiated with 45 MeV proton beam of 0.5 nA. As a result of comparing a EBT film result, 2D prompt-gamma distribution measured for $9{\times}10^9$ protons is similar to 2D proton dose distribution. In addition, the 45 MeV estimated beam range by profile distribution of 2D prompt gamma distribution was $17.0{\pm}0.4mm$ and was intimately related with the proton beam range of 17.4 mm.